Military Engineer Services Tender
To inquire about any e-tender the Andaman & Nicobar Islands government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder one can find every eprocurement Punjab tender on BidAssist. BidAassist has collated each and every Eproc Andaman & Nicobar Island Tender on its website. Looking for Andaman & Nicobar Island tenders online or going through the cumbersome government websites for it, has been made easier with the help of BidAssist.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date29 Mar 2023
Closing Date17 Apr 2023
Tender Amount₹ 34,45,000
Costs
EMD
₹ 68,900Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_587549_1Bid Award Id
ViewTender No
8726/GE/H/PBTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match and 25mm thick PCC 1:2:4 type B0 using 12.5mm grade stone aggregate) as levelling course complete all as specified and as directed.
25
-
-
... More
M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
56
-
-
... More
Demolition stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar complete all as specified and as directed.
0.4
-
-
... More
M&L for 16 to 18mm thick granite slab (of approved shade), machine cut, polished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform, counter of WHB and like over and including 15mm thick screen bed in CM 1:4 including grinding/chamfering and polishing he edges complete all as specified and directed.
4
-
-
... More
M&L for rouding to edges if stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and as directed by Engr-in-Charge.
5
-
-
... More
Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.
0.3
-
-
... More
Providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4) complete, in walls complete all as specified and directed.
3
-
-
... More
M&L for precast cement concrete block masonary with solid block using PCC 1:3:6 type C1 (using 20mm graded aggregate) exc 10cm in width setting in mortar(1:6) complete, in walls complete all as specified and directed.
4
-
-
... More
M&L for plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and as directed.
5
-
-
... More
M&L for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specifed and directed
100
-
-
... More
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
0.25
-
-
... More
M&L for nominal mix RCC 1:1:5:3 type A1 (using 20mm graded stone aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja/facia and the like completely all as specified and as directed
0.25
-
-
... More
M&L for nominal mix RCC 1:1:5:3 type B1 (using 20mm graded stone aggregate) in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs under reamed piles and mass concrete incl all as specified and as directed
1
-
-
... More
M&L for nominal mix RCC 1:1:5:3 type B1 (using 20mm graded stone aggregate) in columns, pillars, peirs, posts and struts incl all as specified and as directed
1
-
-
... More
M&L for nominal mix RCC 1:1:5:3 type B1 (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span incl all as specified and as directed
1.5
-
-
... More
M&L for formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in rough finished flat surface.
3
-
-
... More
M&L for formwork to side and soffits of floor or room beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc in rough finished flat surface.
10
-
-
... More
M&L for formwork flat or curved to side of concrete foundation, footings, bases of column, and plinth beams and similar work vertical or to batter in rough finished surface.
10
-
-
... More
M&L for formwork flat or curved to side of pillar, posts, struts, piers, column and stanchions in rough finished surface.
10
-
-
... More
M&L for formwork for rough finished surface of concrete to edges of concrete flats. treads, break in floor, window cills, concrete railings, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n.exc 10cm wide complete all as specified and as directed.
5
-
-
... More
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
250
-
-
... More
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
50
-
-
... More
Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and directed.
178
-
-
... More
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
180
-
-
... More
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and directed.
12
-
-
... More
M&L plain aluminium flat section not less than 0.68Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specified.
30
-
-
... More
M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tile
10
-
-
... More
Dismantling of wrought iron or mild steel work and structural steel work of any description or otherwise provided for complete all specified and directed.
2
-
-
... More
M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250) Quality 'A' complete all as specified and as directed.
550
-
-
... More
M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.
500
-
-
... More
S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.
400
-
-
... More
S&F Mild Steel work in tubular trusses and tubular posts/ puilins including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS : 1161-1979 grade st-240 including notching , drilling, fitting, reverting and or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer-in-Charge.
240
-
-
... More
M&L for preparation of new steel of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.
8
-
-
... More
M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
25
-
-
... More
M&L for preparation of old steel surfaces over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
17
-
-
... More
M&L 20 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 200ml per 50Kg cement bag complete all as specified. (Note : WPC shall be measured and paid separately)
8
-
-
... More
Supply only water proofing compound.
0.3
-
-
... More
M&L for preparing plastered surfaces and applying a coat of cold applied bituminous primer over cleaned roof/ sunken surface @ 0.30 Kg/sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.2 Kg/Sqm over primer followed by 3 mm thick APP modified 5-layered polymeric water proofing membrane weighing not less than 3Kg/sqm reinforced with polyester non-woven fabric weighing not less than 150 grams/sqm laid as per the manufacturer instructions with side over lap of 100mm & end over lap of 150mm & tucked into the chases on roof, sunken slabs, edges and vertical surfaces and painting over APP membrane sheet with aluminium paint @ 0.10 Kg/Sqm complete all as specified and directed.
MAKE: STP Limited/ PIDILITE INDUSTRIES LIMITED (Dr. FIXIT TORCHSHIELD P3160)/ IWL INDIA LTD
8
-
-
... More
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
4
-
-
... More
M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and as directed.
40
-
-
... More
M&L for PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
0.5
-
-
... More
M&L for providing 50mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor/paving etc including finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
220
-
-
... More
M&L for Cement Concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) as in sub base, foundation or mass concrete concrete complete all as specified and as directed.
21
-
-
... More
M&L for providing 75mm thick PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.
10
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each as in soils complete all as specified and as directed.
2
-
-
... More
Removing excavated material (soils) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
38
-
-
... More
Excavating in post holes (or similar holes) in hard/dense soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 50 metres and making good disturbed surfaces complete all as specified and as directed.
4
-
-
... More
S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:4) in floors complete all as specified and directed.
50
-
-
... More
Dismantling ceiling boards / wall cladding (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.
50
-
-
... More
M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., including 6mm thick non-asbestos fibre cement building design boards fixed or laid/ inserted to aluminium frame work with screws including preparation of surface with two coat of oil bound distember over a coat of chalk writing primer complete all as specified and as directed.
50
-
-
... More
M&L for seamless gypsum board false ceiling 12 mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fibre tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20mm and 30 mm, web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm c/c / intermediate channel 0.9 mm thick having two equal flanges of 15 mm suspended from soffit at approx 900 mm c/c with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thick having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting across the intermediate channel at 457 mm c/c including hangers 6 mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long and finally applying two coats of oil bound distemper with roller finish over a coat of primer after applying 3mm thick putty complete all as specified and as directed.
78
-
-
... More
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
450
-
-
... More
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
215
-
-
... More
M&L for 15mm thick plaster in CM (1:4) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
20
-
-
... More
M&L for preparation of newly plastered wall surfaces and applying with 1mm average thick wall care putty and applying two coats of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
200
-
-
... More
M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of primer .
15
-
-
... More
M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of distemper oil emulsion over a coat of primer including 1mm wall care putty after filling the cracks with filler complete all as specified and as directed.
152
-
-
... More
Cutting out existing crack in concrete surfaces/ masonry wall/ slab forming grooves of 25mm x 40mm size, cleaning the groove thoroughly with blower, applying primer coat of IPH CC or Hydroseal Siliconate Epoxy resin & Hardener mix in equal proportion with spray gun suitable to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC of Make Harjas Coating & polymers or Hydroseal siliconate epoxy resin, resin hardener and admixture in proportion of 1:1:2 and finally applying sealing coat of the same mix in same manner as the primer is applied with following minimum coverage per running metre length of groove
Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60 gms 100 gms, Admixture 400gms
50
-
-
... More
M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound@200ml per 50Kg cement bag, finished the surface even and smooth withour using extra cement complete all as specified. (Note. WPC shall be measured and paid seperately)
200
-
-
... More
M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
220
-
-
... More
M&L for complete removal of exisitng treatment on plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
200
-
-
... More
M&L for 10mm thick plaster in CM (1:3) on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified.
50
-
-
... More
M&L for preparation of newly plastered ceiling surfaces applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty complete all as specified and as directed.
50
-
-
... More
M&L for applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and as directed.
56
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
24
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.
13
-
-
... More
S&F facrory made UPVC coloured fixed window area not exceeding 1.00Sqm each made of extruded profile with wall thicknessof 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame(60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2+-0.2mm thick, galvanized steel frame ( 28 mm x 21.5mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners, 5mm thick glazing with selected quality glass (note : The unit rate quoted by contractor exclude cost of glass and includes all other connected accessories Net opeining will be measured for payment purpose).
4
-
-
... More
S&F facrory made UPVC coloured Sliding window. Three track area not exceeding 2.00sqm each made of extruded profile with wall thicknessof 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame(88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 67mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2+-0.2mm thick, galvanized steel frame ( 30 mm x 18mm), 2 nos, sliding sash (30mm x 18mm), slidinng mesh sash (26mm x 10mm) profile to be insterted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware : [Tocuh Lock of zinc alloyed (white powder coated),steel roller system. Stainless Steel wire cloth 0.36mm nominal dia of wire and average width aperture 1.40mm and required accessories.(Note : The unit rate quoted by contractor exclude cost of glass and includes all other connected accessories Net opeining will be measured for payment purpose).
19
-
-
... More
S&F 5mm thick sheet glass, ordinary quality in UPVC window/ventilator not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
18
-
-
... More
S&F Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preservative treatment complete all as specified and as directed.
0.4
-
-
... More
M&L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, inclduding boltsn if required hooks (stay), heavy for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, holdfasts, wall tie, hooks for hanging, fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
25
-
-
... More
M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height copings, kneelers, apex stones, bed plates, kerbs not provided for in itme 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throating complete all as specified and as directed.
1
-
-
... More
S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
14
-
-
... More
S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.
10
-
-
... More
S&F only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.
7
-
-
... More
M&L for preparation of new undecorated wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.
55
-
-
... More
M&L for preparation of old painted surface of wood and wood bases surface of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or grith complete all as specified and as directed.
10
-
-
... More
S&F factory made singel extruded WPC (wood polymer composite) solid door/window/ceosetory windows and other frames/chowhat of size 45x70mm comprising of virgin PVC polymer of K value (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxcity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body theaded star headed SS screws having minimum frame desity of 750KG/Cum, screw withdrawal strength of 2200N (Face) and 1100N (edge) minimum compressive strength of 58N/Sqmm, module of elasticity 900N/Sqmm and resistant to spread of flame of Class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fastners shall be paid for seperately).
Note : for WPC solid door/window frames, minus 5,mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimension on plus sides shall be acceptable but no extra payment on this account shall be made.
13
-
-
... More
S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm plain colour PVC sheet on back face as per specification & drawing fixed to door frame complete all as specified and as directed.
4
-
-
... More
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.
60
-
-
... More
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
34
-
-
... More
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
6
-
-
... More
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
40
-
-
... More
S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and
sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
10
-
-
... More
S&F Mortice lock, brass, 4-lever brass body, size 100 mm, vertical type complete all as specified and as directed.
1
-
-
... More
S&F door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed aluminium (Die cast ) body. complete all as specified and as directed.
2
-
-
... More
S&F mild steel powder coated curtain rods including side globin and end brackets including 10 Nos slide rings per metre length of rod complete all as specified and as directed
40
-
-
... More
M&L for 18mm thick HDF boarding (fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated size of the cabinet as per requirement of the site or as directed by Engr-in-Charge, complete all as specified.
Make: Bajaj / Axix / Greenply / Amnchidply / or equivalent.
Note: (i) Area shall be measured flat on face of the cup board only.
(ii) Cutting edges of cupboard shutter / shelves to be finished with NC lacquer sandling sealer or adhesive sealing tape all as directed.
10
-
-
... More
S&F stainless steel auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified.
Make : Hettich/Harrison/Dorsel
28
-
-
... More
S&F stainless steel non magnetic bow handle "D" type anodized 150mm long complete all as specifed. Make : Hettich/Harrison/Dorsel
14
-
-
... More
S&F stainless steel non magnetic barrel tower bolt 100mm long of extruded section complete all as specified and as directed.
Make : Hettich/Harrison/Dorsel
14
-
-
... More
S&F ball catchers 304 grade stainless steel finished suitable for cabinet premium quality complete all as specified and as directed.
Make : Hettich/Kaff,Godrej & Kich
7
-
-
... More
S&F Stainless Steel non magnetic 304 grade wire Basket of pull out type like plate/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchen cabinates etc of required size complete all as specified and as directed.
Make : Elnora/Godrej/Evershine
15
-
-
... More
S&F telescopic ball bearing runners minimum length 400mm (KA 5632) full extension load capacity 45Kg complete all as specified and as directed.
Make : Godrej/Hettich/Kaff
4
-
-
... More
Dismantling PVC water tanks of capacity exceeding 500 litres and not exceeding 1000 litres and removing to store complete all as specified and as directed.
2
-
-
... More
S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 20mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes including taking down old unserviceable tank with fixtures complete all as specified and as directed.
2
-
-
... More
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
25
-
-
... More
Supplying & laying of 25mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including suitable reducer for 15mm dia taps fittings as required complete all as specified and directed
25
-
-
... More
Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to end or edges of landings, steps,cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm grith.
25
-
-
... More
S&F 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron complete all as specified and as directed.
2
-
-
... More
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories complete all as specified and directed.
18
-
-
... More
S&F 110mm PVC (SWR) grade single socketed pipes, in any length pipes single socketed, in any length including bends socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and as directed.
6
-
-
... More
S&F 110mm bore PVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floor complete all as specified and as directed.
3
-
-
... More
S&F in repair 110mm dia PVC (SWR) bends any radius and jointed with approved adhesivecomplete all as specified and as directed.
3
-
-
... More
S&F110mm dia PVC (SWR) junction single (single T) equal or unequal and jointed with approved adhesive complete all as specified and as directed.
1
-
-
... More
S&F in repair 110mm dia PVC (SWR) vent cowl jointed with approved adhesive complete all as specified and as directed.
1
-
-
... More
S&F 75mm PVC (SWR) grade single socketed pipes, in any length pipes single socketed, in any length including bends socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and as directed.
3
-
-
... More
S&F 75mm bore PVC (SWR) pipes single socketed, in any length pipes single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floor complete all as specified and as directed.
6
-
-
... More
S&F 75mm dia PVC (SWR) bends any radius and jointed with approved adhesivecomplete all as specified and as directed.
3
-
-
... More
S&F 75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as directed
7
-
-
... More
S&F in repair for vitreous China, wash down water loset pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flush type pipe, antisypthonic complete all as specified and as directed.
2
-
-
... More
S&F in repairs vitreous china wash down water closet pan (pedestal pattern white type) standard size with 'S' or 'P' trap and other connecting items approved brand including fixing with white cement complete all as specified. Make : Jaquar (Cat part No : LYS WHT 0314) or equivalent.
1
-
-
... More
S&F plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified.
3
-
-
... More
S&F in repair PVC white low level flushing cistern 10 litre capacity with all syphonic action type with inlet, ball valve, float including flush pipe lone 32mm dia, ball valve,handle,brackets etc complete all as specified and as directed.
2
-
-
... More
S&F in repairs vitreous China wash hand basin,oval shape, size 550mm x 400mm including brackets, 32mm dia waste coupling brass chromium plated, PVC waste pipe of suitable length, chain and plug, with all fittings all necessary inlet and outlet connection complete all as specified and as directed.
3
-
-
... More
S&F 32mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and as directed.
4
-
-
... More
S&F in repair PVC connections 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed.
15
-
-
... More
S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.
1
-
-
... More
S&F 0.63mm thick SS sheet stainless steel kitchen plate rack of size 31'' x 30'' x 10'' standard quality complete all as specified and as directed.
Make : Blue star, Prayag, Silver Shine or equivalent .
1
-
-
... More
S&F in repair mirror cabinet PVC/Fiber of size 550x520x100mm with sliding mirror 4mm thick 2 Nos of size 240x290mm with built in rack of size 230x150x90mm with PVC plug etc with CP towel rail of length 270mm and 100mm dia complete all as specified and as directed. Make : Supreme
3
-
-
... More
S&F Jet spray multipurpose 15mm dia for bathroom complete all as specified and as directed,
Make : ZIM Cat Part No - 1712 or equivalent.
3
-
-
... More
S&F WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.
MAKE: JAQUAR Cat part No. CON-167KNB equivalent.
3
-
-
... More
S&F in repair CP brass hot and cold 15 mm dia wall mixer 3-in-1 system with provision of both hand shower and over head shower composite with 115mm long bend pipe connecting legs & wall flanges complete all as specified and as directed. MAKE: Jaquar Cat. Con-281KN OR Equalent Model
3
-
-
... More
S&F in repair CP over head shower rose 105mm dia round shape with revolving joints (with body rotation) & 115mm long shower arm with rabit cleaning system and all fitting complete all as specified and as directed.
MAKE: JAQUAR Cat part No. OHS-1709 or equivalent
3
-
-
... More
S&F in repair CP brass 15mm hand shower (health faucet) (ABS Body) with 1m long easy flexible tube in chrome finish and wall hook complete all as specified.
Make : JAQUAR Cat part No. ALD-CHR-585 or equivalent
3
-
-
... More
S&F in repair toilet paper holdercomplete all as specified and as directed.
MAKE: JAQUAR Cat part No. CAN-1153N) or equivalent
3
-
-
... More
S&F in repair single towel rail, 600mm long complete all as specified and as directed.
MAKE: JAQUAR Cat part No. AQN-7711 or equivalent.
3
-
-
... More
S&F soad disc complete all as specified and as directed.
MAKE: JAQUAR Cat part No. AQN-7731 or equivalent.
3
-
-
... More
S&F in repair bib cock, 15mm dia, with crutch handle as approved fancy type, with long body complete all as specified and as directed.
MAKE: JAQUAR Cat part No. Con-107KN or equivalent
2
-
-
... More
S&F two way bib cock, 15mm dia, ancy type, with crutch or butterfly handle, with long shank and cup in repairs complete all as specified and as directed.
MAKE: JAQUAR Cat part No. CON-041KN, or its equivalent
3
-
-
... More
S&F in repairs concealed stop cock with wall flange including all fittings complete all as specified and as directed.
MAKE: Jaquar Cat part No. CON-083KN or equivalent
3
-
-
... More
S&F angular stop cock, 15mm dia, cast copper alloy, , fancy type, in repairs complete all as specified and as directed.
MAKE: JAQUAR Cat part No. CON-053KN or equivalent
15
-
-
... More
S&F CP corner glass shelf with bracket complete all as specified and as directed.
Make : JAQUAR Cat part No. CAN-1173 or equivalent
3
-
-
... More
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.
235
-
-
... More
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth, for foundation etc., or for shafts, wells, cess pits, manholes, pier holes etc not exc. 10 Sqm on plan and n.exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.
4
-
-
... More
Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.
74
-
-
... More
Taking down fuse Unit/DBs with MCB/MCCB 415 Volt/230 Volt complete all as specified and directed.
2
-
-
... More
Taking down old aluminium sub main wiring of any size complete all as specified and directed.
120
-
-
... More
Taking down light fittings of any type complete all as directed
39
-
-
... More
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including concealed / surface PVC conduits as suitable of site (Medium Grade) of size not less than 25mm dia and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 6A light / fan / SOCKET OUTLET/Bell point controlled by one, one way 6 Amps modular switch.
-
-
-
... More
ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.
34
-
-
... More
TWO LIGHT point controlled by one, one way 6 Amps modular switch.
10
-
-
... More
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on independent board.
16
-
-
... More
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board with other modular switches.
6
-
-
... More
One BELL point controlled by one 6 Amps bell push switch.
2
-
-
... More
M&L for Point wiring complete with 4.0 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non metallic PVC conduit of suitable size (not less than 20mm dia) medium grade and conduit accessories concealed in walls/ceilings etc., including provision of PVC insulated 4.0 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET and Geyser point controlled by one, one way 16 Amps modular switch on independent board.
6
-
-
... More
S&F modular switch, one way, one module, single pole, 6 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Havells (Crabtree)
66
-
-
... More
S&F modular socket outlet multipurpose, 3 pin, 6 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed.
Make : Roma(Anchor) / Legrand / Havells (Crabtree)
22
-
-
... More
S&F modular socket outlet multipurpose, 3 pin, 16 Amps,heavy duty flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed.
Make : Roma(Anchor) / Legrand / Havells (Crabtree)
6
-
-
... More
S&F modular switch, one way, one module, single pole, 16 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Havells (Crabtree)
6
-
-
... More
S&F modular bell push, 6 amps, 1 module, 230 volts complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Havells (Crabtree)
1
-
-
... More
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 230 volts complete all as specified and as directed.
44
-
-
... More
S&F electric bell, Ding dong type, 230 volts, AC supply complete all as specified and as directed.
Make : Anchor/Kinjal/Standard
1
-
-
... More
S&F AC starter switch of capacity 25 Amps working on 240 Volts, AC supply suitable for split type airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACTO252504 or equivalent in ANCHOR/HAVELLS/L&T
3
-
-
... More
M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 20mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed.
NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
35
-
-
... More
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed.
NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
Make : Polycab/Havells/Finolex/Gloster/Anchor
85
-
-
... More
S&F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. Make : Indo Asian /Havells/L&T/Legrand
1
-
-
... More
S&F in repairs 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed. Make : Indo Asian / Havells/L&T/Legrand
1
-
-
... More
S&F MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.
Make : Indo Asian/Havells/L&T
18
-
-
... More
S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection, 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : Havells/L&T/Indo Asian
1
-
-
... More
S&F MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian Cat Part No. 811154/Havells/L&T
1
-
-
... More
S&F decorative ultra slim linear LED light fixture of 18 Watts capacity, recess mounted, 220 Volts, 50 Hz AC supply, extruded aluminium heat sink, environmental friendly energy efficient light fitting, surface mounted round in shape(yellow colour as per requirement of site) complete all as specified and as directed.
MAKE: Philips Cat Part No : Dura Slim or equivalent in CG/HAVELLS
9
-
-
... More
S&F wall mounting fan of 400mm sweep, including all fixing arrangements complete all as specified and as directed.
Make : CG Model No. PF Hiflo Wave/Havells/Usha/Orient
2
-
-
... More
Taking down old unsv exhaust fan of any type and any capacityand handed over to AGE E/M store and supply and fixing exhaust fan of capacity of 250mm sweep white in colour 220 volts, AC supply complete including the all fixing arrangement Exhaust fan complete all as specified and as directed.
Make : CG Model No : Ventilus 10" or equivalent make of Havells/Orient/Usha
2
-
-
... More
S&F exhaust fan iron body of 300mm sweep 220 Volts AC, 50Hz with all fixing arrangements complete all as specified and as directed.
Make : CG Model No. Trans Air 12" or equivalent make of Orient / Usha / Havells
1
-
-
... More
Supplying fixing and testingTube light fittings LED 20 watts 4 feet yellow colour of light as required at sight including all accessories and fixing arrangements for fixing hte light complete all as specified and directed Make :CG Cat Part No : CCS-100-20-65-HL2-DP-NW or equivalent make of Philips/Havells/Luker
12
-
-
... More
S&F surface mounted 10watts LED 2 feet including all accessories and fixing arrangements for fixing the light fitting (white/yellow colour of light as required at site) complete all as specified and as directed.
Make : Philips Cat Part No.BN021CLED10S-6500 PSU GR S1/CG/Havells
4
-
-
... More
S&F wall decorated light fitting energy efficient 1x20 3000K (white / yellow colour) LED dimension 210x140x380 mm with and including LED bulb complete (white/yellow colour of light as required at site) complete all specified and as directed.
Make : Philips model No. 31302 or in equivalent make in Havells/CG/Luker
6
-
-
... More
S&F ceiling fan of 1200mm sweep,5 star rated white colour metalic body 220V, 50Hz AC supply, including providing of twin core copper wire 23/0.0076 from ceiling fan to ceiling rose complete all as specified and as directed.
Make : CG & Model No. Energion Star-5 Star/CG/Orient/Usha
4
-
-
... More
Taking down old unsv street light brackets of any size and supply and fixing new GI brackets of GI pipe light grade of size 25mm dia including nuts bolts and washers for budding security light all as specified and as directed.
3
-
-
... More
S&F 25 watts LED building security light fittings win peanuts lean IR 65 luminaire comprise of elegantly designed COB LED ensure efficient optics and uniform distribution of light for street light application. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessary fixing arrangements as per site requirements class I of model.
Make : CG Cat Part No. LSTS-25-CD/Havells/C&S Cat Part No LTESSE25WLED/Havells/Philips
3
-
-
... More
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified.
Make:Roma (Anchor)/Legrand/Simens/Havells
5
-
-
... More
M&L for cutting channels, grooves or rebates with or without reinforcement n exc 15cm girth, and trimming surface for embedding the roof sheet into the wall column surface all as specified and as directed by Engr-in-Charge
65
-
-
... More
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed.
NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements