Forests And Environment Department Tender

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level with Thermo- Mechanically treated bars 10mm jalli dia @ 100mm spacing , 12mm dia bars, 8 mm dia bars stirrups, for plinth beam , 12mm dia bars & Stirrups 8mm @ 150mm spacing

Centring & shuttering including strutting, propping etc and removal of form for: foundations, footings, bases of columns etc for mass concrete, Lintels, beams, plinth beams, girders, bressumers cantilevers, Columns, pillars, piers, abutments, posts & struts etc for mass concrete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level Foundation, pedestal and short column 1:1 .5: 3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring shuttering, finishing and reinforcement: (1 cement : 1 1/2 coarse sand: 3 graded stone aggregate 20 mm nominal size) column

Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering shuttering complete. 1 :1 1/2 :3 (1 cement : 1 1/2 coarse sand (zone III): 3 graded aggregate 20 mm nominal size)

12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement :2 coarse sand:4 graded stone aggregate)finished with a floating coat of neat cement,including cement slurry,but excluding the cost of nosing of steps etc.complete 40 mm thick with 20mm nominal sze stone aggregate

Stuctural steel work riveted ,bolted or welded in build up sections, trusses and framed work,including cutting,hoisting,fixing in postion and applying a priming coat of approved steel primer all complete. (a) MS pipe 2"dia (50mm)(thickness 3.6mm/SWG 09) (86.013 kgs) (b) MS pipe 11/2 "dia (40mm)(thickness 3.2mm/SWG 10) (192.24 kgs)

Providing and fixing precoated galvanised iron profile sheets(size,shape and pitch of corrugation) 0.50mm(+0.05%)total coated thickness with zinc coating 120 grams per sqm as per IS:277 in 240 mpa steel grade,5.7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protectective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm)with EPDM seal,complete upto any pitch inhorizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required .

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm(+0.05% ) total coated thickness ,zinc coating 120grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and plolyester top coat 15-18 microns using self drilling /self tapping screws complete.Ridges plain (500-600mm)

Providing and laying vetrified floor tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades , laid on 20mm thick cement mortar 1:4 (1cement:4coarse sand) including grouting the joints with white cement and matching pigments etc. ,complete.size of tile 600x600mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer )of approved make in all colour ,shades except burgundy ,bottle green ,black of any size in skirting ,risers of steps and dados over 12mm thick bed of cement mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing wash basin with C.I brackets 15mm C.P brass pillar taps,32mm C.P brass waste of standard pattern,including painting of fitting and brackets, cutting and making good the walls wherever require:white vitreous china wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps.

Providing and fixing white vitreous china water closet squatting pan(Indian type). white vitreous china orissa pattern W.C pan of size 580x440 mm with integral type foot rests.

Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes ,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete external work with 25 mm dia nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes ,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing .This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete internal work Exposed on wall. 20 mm nominal outer dia pipes

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. flexible pipe 40mm dia

Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour. Wastecoupling 38mm of 83mm length and 77mm breadth, weighing not less than 60 gms

Providing and fixing factory made P.V.C door frame of size 50x47mm with a wall thickness of 5mm ,made out of extruded 5mm rigid PVC foam sheet ,mitred at corners and joined with 2 nos of 150mm long brackets of 15x15mm M.S square tube ,the vertical door frame profiles to be reinforced with 19x19mm M.S square tube of 19 gauge EPDM rubber gasket weather seal to be providing through out the frame.The door frame to be fixed to the wall using M.S screws 65/100mm size complete

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm for styles and 15x15mm for top & bottom rail.M.S frame shall have a coat of steel primers of approved make and munufacture M.S frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness ,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles ;and 5mm thick ,95mm wide the PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVCsheet out of which75mm shall be flat and 20mm shall be tapered on both side to form lock rail.Top bottom and lock rails shall be provided both sideS of the panel.10mm(5mmx2)thick,20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. Paneling of 5mm thick both side PVC shet to be fitted in the M.S frame welded /sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive .And additional 5mm thick PVC stirp of 20mm width is to be stuck on the interior side of the C channel using PVC Solvent adhesive etc complete. 30mm thick pre-laminated PVC door shutters.

Providing and painting with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: two or more coats on new work

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer