Military Engineer Services Tender

Supply, instal, testing & commissioning of Centrifugal Monoblock Pump set of cast Iron impeller with gland packing coupled with induction motor with 'F' Classs insulation and IP 55 protection suitable for 3 phase, 300 to 415 Volts, 2900 RPM, discharge not less then 3.0 lps at minimum 68 meter head with power rating 7.5 KW and 10 HP, impeller, delivery casing and motor body made of cast iron, pump shaft made of carbon steel, sealing with gland packed. suitable for suction from pipe of size 65 mm dia and delivery to pipe of size 50 mm dia including of Star delta starter of brand Schneider with single phase preventer and over load protection , with provision of 3 crore 10 Sqmm Flat copper cable from starter pannel to pump set, priming line watering arrangement complete using 20mm dia GI pipe Med grade of length upto 10 RM , gate valve 20mm dia- 01 No with necessary PCC foundation with suitable size of nuts, bolts grouted & washers complete all as specified and as directed and minimum 2 years warrenty complete all as specified and directed by Engineer - in - Charge. Make:- (a) Centrifugal Monoblock Pump set (Make : Kiloskar, Specification : 7.5KW/10HP/2900RPM, Model KDS-1065(65X50) MM) or as approved by Engineer - in - Charge.(b) Star Delta Starter :- Brand : Schneider, Specification : Item Code- 325482SNI, CatRef- MS23AI16N5, HSN- 85369010, Type- TSD/A, Automatic, HP Rating- 10HP, Voltage Rating- 415 VAC, Phase- 3, Frequency Rating- 50/60 HZ, Thermal Protection Range- 7 - 10 A, Motor Power Supply- 415 VAC, 50/60 HZ, Dimension - 348 mm width x 272 mm height x 135 mm depth, Degree of protection - IP42 or as per approval of Engrineer-in-Charge / GE.

Supply, instal, testing & commissioning of submersible pump set, electrical driven, motor rating 2.2 KW / 3 HP with not less then 245 meter discharge head, suitable for minimum well diameter 100mm, 32 to 50 mm dilivery size, alongwith non return valve, erection clamp, 3 meter copper conductor synchronous type B, suitable for power supply 400 Volt, 50 HZ, Three Phase, Starting method : DOL, 2900 RPM speed including distributon pannel board outdoor cubical type weather and vermin proof totally enclosed made out of 3.15mm thick CRCA sheet machine pressesd of suitable size, suitable to operate for 3 phase four wire system 415 Volts,50HZ double door in front of and rear openable with locking arrangement including inner shutter for mounting MCBs etc bottom gland plate with suffiecnt Ncs of circular cable entry prewired complete dully powder coated and comprising of incomming feeders as (i) MCB TPN 63 Amp, C Series = 01 Nos and outgoing feeders as (i) MCB TP 415 Volt,10 KA, 10 to 32 Amp C Series=2 Nos (ii) DOL Starter suitable for 3 HP pumpset (iii) Phase indicator RYB set of three with selector switch =01 Nos (iv) Voltmeter digital type 0-500 Volt =01 Nos (v) Ampere meter digital type with CTs 0-63 Amps =01 Nos. Minimum 2 years warrenty complete on pump set and starter. The rates are inclusive of testing of pump at borewell installation for satisfactory functioning / running all as specified and directed by Engineer - in - Charge / GE.. Make:-(a) Submersible pump set (Make : KSB, Specification : 2.2KW/3HP/2900RPM, Model CORA 2C-45+UMA/100-2.2/22 or as approved by Engineer - in - Charge. (b) DOL Starter :- Brand : Schneider, Specification : Item Code- 325431SNI, CatRef- MS13RJ12N5, HSN- 85369010, Sub Brand- TE Starter,Type- TRS, Auto Reversing, HP Rating- 3 HP, Voltage Rating- 415 VAC, Phase- 3, Frequency Rating- 50/60 HZ, Thermal Protection Range- 4 - 6 A, Motor Power Supply- 415 VAC, 50/60 HZ, Fuse Type- 16 A HRC Dimension - 348 mm width x 272 mm height x 135 mm depth or as per approval of Engrineer-in-charge.

Supply and install submersible pump set, electrical driven, motor rating 3.7 KW / 5 HP with not less then 355 meter discharge head, suitable for minimum well diameter 100mm, 32 to 50 mm dilivery size, alongwith non return valve, erection clamp 3 meter copper conductor synchronous type B, suitable for power supply 400 Volt, 50 HZ, Three Phase, Starting method : DOL, 2900 RPM speed including distributon pannel board outdoor cubical type weather and vermin proof totally enclosed made out of 3.15mm thick CRCA sheet machine pressesd of suitable size, suitable to operate for 3 phase four wire system 415 Volts,50HZ double door in front of and rear openable with locking arrangement including inner shutter for mounting MCCBs etc bottom gland plate with suffiecnt Ncs of circular cable entry prewired complete dully powder coated and comprising of incomming feeders as (i) MCB TPN 63 Amp, C Series = 01 Nos and outgoing feeders as (i) MCB TP 415 Volt,10 KA, 10 to 32 Amp C Series=2 Nos (ii) DOL Starter suitable for 5 HP pumpset (iii) Phase indicator RYB set of three with selector switch =01 Nos (iv) Voltmeter digital type 0-500 Volt =01 Nos (v) Ampere meter digital type with CTs 0-63 Amps =01 Nos. Minimum 2 years warrenty complete on pump set and starter. The rates are inclusive of testing of pump at borewell installation for satisfactory functioning / running all as specified and directed by Engineer - in - Charge. Make:- a) Submersible pump set (Make : KSB, Specification : 3.7KW/5HP/2900RPM, Model CORA 2C-65+UMA/100-3.7/22 or as approved by Engineer - in - Charge. (b) DOL Starter :- Brand : Schneider, Specification : Item Code- 325432SNI, CatRef- MS13RJ14N5, HSN- 85369010, Sub Brand- TE Starter,Type- TRS, Auto Reversing, HP Rating- 5 HP, Voltage Rating- 415 VAC, Phase- 3, Frequency Rating- 50/60 HZ, Thermal Protection Range- 5.5 - 8 A, Motor Power Supply- 415 VAC, 50/60 HZ, Fuse Type- 20 A HRC, Dimension - 348 mm width x 272 mm height x 135 mm depth or as per approval of Engrineer-in-charge / GE.

Supply and fix, Flat Cable PVC insulated and sheathed, multi-stranded copper conductor, water proof cable suitable for submersible pumpset upto 5 HP, 3 core flat submersible cable 1100 Volts grade with 4.00 Sq mm conductor area and conductor construction multistrand (No / Dia mm) not less than 56 / 3 complete all as specified and as directed.

Supply and install, testing and commissioning of heavey duty chemical dosing system plunger type suitable to inject solution upto 25 LPH working pressure 10 Kg / cm2 comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP, 1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 Ltrs capacity, complete unit mounted on heavey duty MS fabricated frame duly anticorrosive paint complete with chemical grade PVC NRV. Heavey duty UPVC pipe, Schedule 80 of size 15 mm dia of required length to be used for connection during installation. 3 Phase DOL starter suitable for dosing pump Model : SSAPS/CDSPT/25 (as recommended by maker of chemical dosing system i.e M/S Satya Sai Aqua Pura Services) made of powder coated MS fabricated box consisting of LED indicator, digital volt meter, Amp meter, single phase preventer, high / low voltage protection. Minimum 01 years warrenty on complete system i.e pipe connections and Dosing System including DOL starter. Model & Make :- Model No :- SSAPS / CDSPT/25 (Chemical Dosing System) with DOL Starter, Make : SATHYA SAI AQUA PURA SERVICES or as per equivalent approved Make.