Zilla Parishad Tender

(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. VarietyIn ground floor (a) 1:3:6 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)(f) 25mm. to 30mm. shuttering without staging in foundation etc.

Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (ii) 100 mm dia. boring etc. top enlargement

(i) 50 mm dia. boring etc.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS: 1239 (Part -1). (A) PVC Pipes (i) 50 mm dia.

(i) 100 mm dia PVC pipe

Supplying PVC strainer of approved make with adapter conforming to IS:12818 specifications. 50mm dia.

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a) 1000 litre capacity

Labour for hoisting plastic water storage tank. Upto 1500 Ltr

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing heavy type bell mouth reducing socket.

Supplying, fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq.cm.

Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816-1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg./m. or 15 % of weight for finished structal members weighing less than 22.5 Kg./m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. 1) For structural members of specified sections weighing less than 22.5 Kg./m

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007. with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: With super gloss (hi-gloss) - Two Coats except white in shade

Construction of circular soak well 2.5 metre deep in all types of sandysoils with dry brick work upto 1.6 metre from the bottom having 150 mmintermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.

Solar module : Supply, transport, installation and commissioning of ISI marked solar modules as per following specifications : 1. Cell : Indegenoeous mono crystalyne sillicon SPV cells. 2. Solar module : Mono-crystalline cell with PERC technology/module with bifacial cells. 3. Standards : lSI marked as per IS 14286 and having certification of IEC 61853(1). 61730(1&2), 61710. 4. Modules must qualifies to IS 170210(Part1). 5. Min efficiecy : 19.5%, 6. Fill factor : more than 75%. 7. Module wattage mismatch in the array : within +-3% ....... minimum 300 Wp per SPV output. (a) 1 HP Solar offgrid water pumping system - 900-1200Wp.

Supply and delivery of direct on line ( DOL) strater panel board confonning to ISl3947 and IEC 947 of suitable HP rating for operation in 230V (+ I }yo) AC , single phase , 50Hzl+5yo) comprising of ammeter, voltnreter, thermal overload relay, 2 pole magnetic contactor with in built water Ievel control, under voltage protection, irrdicating lamp. capacitors, on/off push buttons including 5 way connector, wiring with l/1,5 sq. mm PVC insLrlated copper wire. powder coated vermitr proof box of following capacities:- (i) I H.P. (Relay Range 6-10 Amp.)

Supplying, Fitting Fixing & Installation of Iron Removing Filter Plant Capacity 1500 LPH IR Media Filter Working-Downilow Max Flow Rate -3m3/hr Working Pressure-1-3 kg/cm2 Size-13"X54"

Supply and fixing round 2-core 4 sq-mm PVC multi core FR wire for aray connecting.

Supply and fixing MC4 Connector for panel loop.

Earthing with 50 mm (2") dia G.I. pipe 3.64 mm thick x3 mts. Long and 1x4 SWG G.I. Wire (4 mts. Long) 13mm dia. X 80 mm long G. pipe protection (1 mtr, long) to be filed with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 ms. Below the ground level & restoring the surface duly rammed.

Connecting the all equipment to earth busbar inciudng GI (Hot Dip) wire of size as below on wall floor..... as required and making connecion to equipment with bolts, nuts, washers cable lugs as required and mending good damages No. 4 SWG.

Providing and fixing conductor made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supqly and delivery of clear water verticat water vertical wet type submersible pump suitable for bore-well conforming to IS : 8034 ( and as amended thereaiter ) with standard tuOC fo. potable clear cold water and BEE 3 Star Rated.capable of discharging noted M'/h. against head of water column. The pump shall be directly coupled with a continuous rated2- pole suitable wet type vertical squinel cage induction Toto. conforming to IS : 9253 (and as amended thereafter ), suitable for operation in A-C Single phases 220V, 50Hz (category B motor) [100mm dia Bore well, 65m Head, 1.8m³/Hr] (Make : Kirloskar)

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour harges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in al respect as per direction.

ADD GST @18% (on total amount of Sl. No. 1 to 34)

ADD LABOUR WELFARE CESS @1% (on total amount )