Zilla Parishad Tender

Electrical

Supply and Installation of Monocrystalline/Mono Perc , IEC Certified solar panel with the following major specification: Capacity: 125 WP (ERTL and Flash tested), the module shall contain crystalline silicon colar cells and must have a certificate of testing conforming to IEC 61215. Power output of module under STC would be 125 WP minimum at a load voltage of 15.4+0.2V. The open circuit voltage of the module under STC would be 21.0V. The module efficiency will be 14.5% minimum. The SPV module shall have a limited power loss of not more than 10% of nominal output at the end of 10 years and not more than 20% at the end of 25 years. (125 wp x 4 = 500 wp) Environment withstanddability: The solar module shall be able to withstad the temp. extremens ranging from -10C to +85C and the wind load of wind speed upto 180km/Hr. mixium mean hour rainfall of 40mm. Humidity leavel upto 95% Framing: The panel made up with high efficient cells should be made up robust anodized aluminium frame with mounting frame with mounting holes. The strip must contain the following details i) Name of manufacturer. Ii) Model no. or type no. iii) Serial No. iv) year of manufacturing..

LED Luminaries 30 W with in built Lithium Battery Technology (Lithium Phosphate) 45 AH 12.8 V with BMS Dusk-to-Dawn MPPT Charge Controller . ( ERTL and Flash Tested) I. Battery over charge cut off: 14.20V II. Battery deep discharge cut off: 10.2V III. Short circuit protection inbuilt with the system .The luminous 20 watt including water proof bracket IP 66 4200 lumen. with 5 years replacement warenty.