Zilla Parishad Tender

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water , ramming complete including the cost of supply of sand. Payment to be made on measurement of finished quantity)[It.no.-4 P-2]

Net Cement Punning about 1.5 thick in wall, dado, window sills, floor,drain etc. It. No. - 15 , P- 192

Cement concrete with graded stone ballast (40 mm size) excluding shuttering In ground floor and foundation. a) 1:3:6 ratio(40 mm down pakur varity)

Ordinary Cement concrete (mix. 1:1.5:3) with graded stone chips (20 mm normal size) excluding shuttering and reinforcement if any. In ground floor as per relevent IS code.

Hire and labour charges for shuttering with centering and expansion joint filling with shuttering

250 mm thick Brick work with 1st class bricks in cement mortar (1:6) It. No. - 7(a) , P- 15

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m (P-99, it-1, III )

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) With 0.63 mm thick sheet

Fitting & Fixing of Display Board all complete & 3 copies photo.

Add GST

Add Cess