Zilla Parishad Tender

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.b) River Bazree:

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.b) River Bazree:

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a)For works in foundation, basement and upto roof of ground floor/upto 4 m(i) Tor steel/Mild Steel.II. .(JSW/JSPL/SHYAM/ SRMB/ BMASL/ ELECROSTEEL/SSL)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation

Brick work with 1st class bricks in cement mortar (1:4)a) In foundation and plinth

125mm thick brick work with 1st class bricks in cement morter (1;4)in ground floor.

Supplying,fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4nos. Of key stones (10mm)fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if requred to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc.(A)Floor with sand cement morter(1:4)20mm thick &2mm thickness slurry at back side of tiles using cement @2.91kg/sq.m & joint filling using cement slurry @0.20kg/sq.m.(a)Area of each tile upto 0.09 sq.m.

Supplying,fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4nos. Of key stones (10mm)fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if requred to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc.(B)wall with Sand Cement Morter (1:3)15mm thick &2mm thick cement slurry at back side of tiles using cement white cement slurry @0.20kg/sq.m.(a)Area of each tile upto 0.09sq.m(1)coloured decorative.

(A)M.S or W.I. Ornament grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows,railing etc.fitted and fixed with necessary screws and lugs in ground floor.(add extra @1%for each addl.floor upto 4th floor and @1.25%for each addl.floor above 4th floor)(1)grill weighting above 10kg/sq.mtr and upto16kg/sq.mtr.the weight of grill per sq.m will be determined by taking the physical weight of fabricated grill and diving the same by covered area of the same.

Applig decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly(plastered or concrete surface)as per manufacturer's specification.In Ground floor:surface.(3)two coats.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 15 mm thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 10 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.(ii) With 1:4 cement mortar (a) 20 mm thick plaster

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering et

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) ..................... all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof: a) With 0.60 mm thick sheet

Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor (c) Area of each Granite slab above 1.00 Square meter

Supplying, fitting & fixing Industrial Troughed Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor). b) With 0.71 mm thick sheet

(A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc the surface,if necessary.(b)On steel or other metal surface:With super gloss (hi-gloss)(4)Two coats (with any shade except white)

Supply fitting &fixing 1nos aquaguard stroage cooler cum purifier including fitting fixing complete L.S

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer

HAND BORE TUBE WELL Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(a) For depth upto 150 metre.(i) 40 mm dia. boring etc.

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (i) 40 mm dia.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia)40 mm

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) (v) 40 mm dia. medium quality

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm.(v) 40 mm

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm.(v) 25 mm

Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.(i) 40 mm

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.

Add cost of S&P & Electrification

Add GST@18%

Add CESS@1%