Zilla Parishad Tender

Supplying fitting fixing base plate , foundation holding bolts , base pole ……. Etc all complete

Power conditioning unit with IP54 enclosure:Supply, transport, installation and commissioning of IP 54 protected enclosured InverterUnit qualifying IEC 61683-Efficiency measurement and IEC 60068-2-EnvironmentStandard safety standard suitable for 3 Phase A.C. motor, IGBT based high voltageswitching inverter with MPPT technology, to take care of the variation of Sun light andwill be suitably mounted inside the metal enclosure. Inverter should have protectionagainst Dry run, Over current, Under current, Over voltage, Under voltage, Short circuitetc. System should be able to run at low sunshine and minimum 7 to 8 hours a day runshould be possible during normal sunshine. condition. Inverter should have option toauto start for any short trip off due to low light/ cloudy situation except for dry run.Inverter should 4 be provided with a display to show the various parameter by the usersuch as Voltage, Current, Solar panel DC voltage, Inverter IGBT temperature, Out putAC voltage, Output frequency, Pump flow (direct or calculated method), Irradiation etc.The system should store the data at a set interval, be capable to transfer it to externalstorage device and support communication of its operational parameters and logs overModbus protocol It should also monitor and save total run time, total water pumped etc.There should be provision for interfacing GPRSbased data transmission. (For 3 Hp Capacity Pump Motor Set)

Cable and Accessories:Supplying, fitting and fixings of UV rated Copper Cable laid inside HDPEconduit andother accessories as per followings with necessary connection with the Solar PVModule, MPPT etc.i. 4.0 Sq mm single core multi studs - 10 Mtrs (Minimum)ii. 6.0 Sq mm single core multi struds -5 Mtrs (Minimum)iii. Lugs, HOPE Pipe, Flexible Pipe, Saddle, Cable tie etc.c) For 3 Hp Structure

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SW G GI (HotDip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washersincl. S & F 15 mm dia GI pipe protection (1 Mts. long) to flaton wall/floor with GI saddles as required and connection to equipments incl. drillingholes, with bolts, nuts, washers etc rate collected from WRDD schedule 2(a)

Testing and commissioning of scheme after completion of all work. rate collected from WRDD schedule

c) 3 HP ISI marked 3 phase surface mounted monoblock pump motor having discharge at required head as below:- i) Monoblock Surface Pump-motor set ISI marked as per IS: 9079 for mini RLI scheme!PDW with discharge of 13.8 Lps at 18 mts. total head with 100 mm dia. reinforced PVCsuction pipe and delivery Set 39753.25 pipe, foot valve, nipple, priming bend Cable andall other required accessories to complete connection of suction and delivery side.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) a) 40 mm dia

b) 80 mm dia

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (i) 80 mm dia

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-inchargeincluding cost of all materials labour and equipment complete.

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

Construction of tube well platform (Size 1.20m x 1.20m) with 75mm. thick cement concrete (6:3:1) using 20mm down jhama chips' over a layer of blick flat soling including necessary earth work and ramming 125mm x75mm x(thick) band set in cement mortar (4:1)on all siders keeping outlet for drainage,12mm thick cement plaster (4:1)with neat cement finishing to the exposed surface including the concrete surface below ground level in the periphery of the land includtng 1,.2 m length surface drain with necessary shuttering & curing complete in all respect with all labours & materials .

I.M. -II Hand Pump complete set will be supplied by the agency ( Bhagirathi or approved band)

Washing ,cleaning & disinfection of tube well by using bleaching powder as per instruction of E.I.C

Hire and labour charges for assembling & fitting fixing of India Make-II DWP hand pump (complete set)

Providingand fixing concrete sign boardas per IRC specification of size 900x750x37 mm thick made with double layer IRC………………………. Cost of reinforcement concrete, shuttering, nuts & bolts,washer etc complete