Zilla Parishad Tender

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.

Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.

Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm.

Supplying, fitting and fixing heavy type bell mouth reducing socket

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS 32 mm

50 mm

100 mm dia.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc

Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete

Cement concrete with 30 mm down graded shingles excluding shuttering

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and rakingout joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chippingover concrete surface] (c) With (1:4)cement mortar 15 mm th plaster

Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (ii) Other than Coloured decorative including white

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer

Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (d) Polythene

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc

Supply, transport, installation and commissioningof MNRE(Ministry of Renewable Energy,Govt. of India)/ IECapproved Solar Module of multicrystaline cell with min. efficiency of 15% and fill factor more than 70%, laminated between sheet of -Ethylene Vinyl Acetate (EVA)and high transmissivity3.2mm tempered glass, framed in anodized aluminium frame .The power output of individualPVmodules used in the PVarray, under STC,should be a minimum of 300 Watt peak,with adequateprovision for measurement tolerances.Modules supplied with the Spy system should have certificate as per IEC61215 specification or equivalent National or International standards. Modules must qualify to IEC61730 part I and part II for safety qualification testing and Salt Mist Corrosion Testingasper IEC61701/IS 61701.and havingwarranty for output wattage, which should not be less 1 than 90%at the end of 10 years and 80%at the end of 25 years. Necessarytest certificate also to be supplied. a) For 2 HPOff-grid SolarWater PumpingSystem(with Surfacepump-motor set) - 2400Wp with 300 Wp Spv Panel.

Supply and fitting fixing 2 Nos. Iron Removal Vessel made by TATA / Pantier / WAMAX of FRP 1354 having top opening 2.5" threaded, 2.5"-8 NPSM NECK including 25 NB Top Multiport Valve -1 No. , Riser Pipe 1 No., with Duel media as per necessity (with following materials actvie carbon, Anthracite , gravel, Treated sand,Green Sand, birm siliphose, etc), size 13 inches dia and 54 inch Height., big blue housing set 4’’x20’’ 02 nos with 5 micron polypopylene filter Cartridge., fixed in middle in between of out let pipe of the roof top water tank including all incidental charges and transportation charges

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Connecting the equipment to the earth busbar incl. S&F GI wire of size bellow on wall /floor as required and making connection to the equipment with bolts, washers, cable lugs etc. as required and mending good damages

Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) (b) 30 cubic metre per hour capacity electro motor pumping set

Supplying 1 m × 0.6 m × 24 swg MS board containing list of spout wise water users by making numbers of spout as directed by EIC. The board should have base colour - Black and words - White to be fitted and fixed on the wall of the pump house

A solar water Pump system is essentially an electrical pump system in which the Electricity is provided by one or several Photo voltaic (PV) panels. A typical solar Powered pumping system consists of a Solar panel array that powers an electric Motor, which in turn powers a bore or Surface pump. Features High Efficiency PV Module. 1000 wpWith 330wp Module. Intelligent Pump Controller. DC-AC conversion to run 3Phase AC DESCRIPTION Solar water Pumps are devices made to pump water using the energy of the sun. For rural location that are not part of the local Electricity Grid, Solar pumps offer a clean and simple alternative to fuel-burning generators. Including Supplying fitting fixing water proofing 6 mm 2 Core aluminium wire for Submersible Pump.

Supply , transport , installation and commissioning of IP S4 protected enclosured Inverter Unit qualifying IEC 61683-Efficiency measurement and IEC 600682-Environment Standard , safety standard suitable for 3 Phase A.C. motor, IGBT based high voltage switching inverter with MPPT technology,to take care of the variation of Sun light and will be suitably mounted inside the metal enclosure.Inverter should have protection againstDry run, Overcurrent, Under current, Overvoltage,Undervoltage, Short circuit etc. System should be able to run at low sunshine and minimum 7 to 8 hours a day run should be possible during normal sunshine condition

Construction of soakpit with necessary drain Construction of circular soak well ,4 nos. concrete ring deep in all types of sandy soils with 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering

Collecting sample of water for bacterological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants andm sterelising the equipments,paying all charges and fees,testing etc.,complete in all respect as per direction

Insurance @ 2% for Item No. 22,23,24,25,26,27,28,29 covering a period of 4 years.

Add GST @ 18 %

Add Cess @ 1%