Zilla Parishad Tender

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Mobilization charges of all machinery/boring set & its accessories belonging to the work site including carriage of materials.

Labour for lowering of submersible pump including hire charges of necessary scaffoldind, chain pulley, wire rape etc including fitting & fixing panel board etc as per direction of E.I.C (One plumbing mason+Electrician+Two nos plumbing helper)

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 150 mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 100 mm dia

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (L) Reducing Socket (mm X mm) 150 mm x 100mm

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (L) Reducing Socket (mm X mm) 100 mm x 50mm

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications 100 mm dia.

Supplying, fitting and fixing plug of approved make conforming to IS specification 50 mm dia

Supplying, fitting and fixing GI Cap at top……150 mm dia….

Supply of MS housing clamp for holding housing pipe & column pipe………………… 50mm dia

Supply & Delivery of 5.0 H.P submersible pumping machinery,3 Phase directly coupled with wet winding type submersible motor having following specification Discharge-10 m3/hour,Head-45 mtr.9 stage, Impeller-SS/Noril/GM,Shaft-SS,Outlet-50mm Motor three phase 220 volt 5% wet winding type submersible motor,Mode of starting-DOL,Make-KSB/KILOSAKER (KS4G-0510) N.B-Manufacuturer test certificate along with curve chart should be submitted at the time of delivery.....

Supply of cubical type motor starter panel from 14 SWG CRCA sheet having 1 no 32 amps 440 V DP MCB,Suaitable range Ammeter,Voltmeter (0-300) indicating lamps,DOL starter suaitable capacity capacitor for three phase motor with provosion of overload relay with start stop pushes buttons all complete as per direction..................

Supply & delivery of 50mm dia UPVC column pipe-3.0mtr long each (Medium duty)

Supply & delivery C.I/G.I adopter top adapter & bottom adapter… 50mm dia

Supply 4.0 sqmm 3 core pvc insulated 1.1 KV grade flat submersible Cable……….

Supply of G.I. Elbow. 50 mm dia

Supply of G.I. union(vi) 50mm dia

Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long)(vi) 50mm Dia

Supply,fitting,fixing ISI mark non return valve 50 mm dia approved make,Zoloto/Leader

Supply of G. I. pipes of TATA make including necessary sockets (f)50 mm dia Medium quality

G.I/M.S fabricated kisox box having 3 no A.L busber with provition for cable entry way and door(manking arrangement all complete as per drawing and direction G.I/M.S sheet not less trhan 14 gauge

Masonary work for tube well base and installation of kiosk boxby surfacing necessary sand ,cement,chips etc.

Suppliying,laying,fitting,fixining & joining of UPVC pipes(6.0 kg/\sqcm water pressure) class-III cornforming to IS: 4985-2000 latest revision & amendments.If any,with necessary UPVC/CI specials.CIDF sulice valves as per work in execavtion in any kind of soil (including mix soil but excluding morum and laterite soil or sandstone)keeping properly at site,carrying of pipes specials,valves from the local store to work site and (by rikshow van\headload /kart etc) and lowering,laying of pipes specials valves aligenment,jointing the pipe and specials including supplying of solvent cement(as per IS:14182-1994) including cost of all fabricated pvc fitting that is tees,bend,redcers,adopter etc as per(IS:101-1998) and making flange joints including supplying required quantity of nuts,bolts rubber insertion(CIDF sulice valve willbe supplied by the department free cost) as required at site by adopting suitable method so as facility the maintenance of pipe line locally as per conventional method and washing clening disinfection with bleaching powder and hydraulic testing of the entire pipeline with necessary equipments including consolidation with watering in layer not exceeeding 150mm thk. with maintaing and average depth of Cushion of 1.00 mtr.from the top of pipeline and restoration of damge roads including manking inter connection with distribution pipes etc all complete as per drawing direction satisfaction of the E.I.C A) Pressure rating class-III iii)Laying of pipe line including cost of pipe fitting/specials & Valbes c) 75 mm dia(O.D)

Suppliying,laying,fitting,fixining & joining of UPVC pipes(6.0 kg/\sqcm water pressure) class-III cornforming to IS: 4985-2000 latest revision & amendments.If any,with necessary UPVC/CI specials.CIDF sulice valves as per work in execavtion in any kind of soil (including mix soil but excluding morum and laterite soil or sandstone)keeping properly at site,carrying of pipes specials,valves from the local store to work site and (by rikshow van\headload /kart etc) and lowering,laying of pipes specials valves aligenment,jointing the pipe and specials including supplying of solvent cement(as per IS:14182-1994) including cost of all fabricated pvc fitting that is tees,bend,redcers,adopter etc as per(IS:101-1998) and making flange joints including supplying required quantity of nuts,bolts rubber insertion(CIDF sulice valve willbe supplied by the department free cost) as required at site by adopting suitable method so as facility the maintenance of pipe line locally as per conventional method and washing clening disinfection with bleaching powder and hydraulic testing of the entire pipeline with necessary equipments including consolidation with watering in layer not exceeeding 150mm thk. with maintaing and average depth of Cushion of 1.00 mtr.from the top of pipeline and restoration of damge roads including manking inter connection with distribution pipes etc all complete as per drawing direction satisfaction of the E.I.C A) Pressure rating class-III iii)Laying of pipe line including cost of pipe fitting/specials & Valbes d) 90 mm dia(O.D)

Construction of R.C.C street stand post with platform etc. with drain ordinary cement concrete M-15 (Mix 4:2:1) with 20mm down local hard stone(crusher stone) including plastering 20mm.th.(6:1) with neat cement punning to platform at per Dept. Type drawing and design including tapping the distribution main supplying, fitting, fixing 15mm. Brass ferrule with necessary saddle price with 20th mm dia. G.I. pipe of TATA make medium quantity (considering total length of pipe required upto 3 mtr.) with specials 15mm dia bib cock, GI nipple,20x15mm dia GI reducing socket etc. all of approve quality and all complete as per direction of the E.I.C

Eletrification charges for pump of WBSEDCL

Add GST @ 18%

Add Cess @ 1%

Add Contigency @ 3%