Zilla Parishad Tender

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand.

Cement concrete with 30mm down graded jhama khoa excluding shuttering. Pakur variety. 1:3:6

25mm thick Damp proof course with stone chips ( 1:1.5:3 ) double chequered with admixture of water proofing compound (approved quality @ 2% by weight of cement content).

Ordinary Cement concrete (M-20) 1:1.5:3 with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In ground floor as per relevant IS codes.

Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction (i) Tor steel/Mild steel. a) For works in foundation, basement and upto roof of ground floor/ upto 4 m

Brick work with 1st class bricks in cement morter (6:1) In foundation

Brick work with 1st class bricks in cement morter (6:1) in Superstructure

125mm thick brick work in cement mortar (4:1) in ground floor

125 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor including H.B. netting in every alternate layers.

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (a) 20mm thick plaster. (i) With (6:1) cement morter.

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (b) 15 mm thick plaster 4:1

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (ii) With (4:1) cement morter, (c) 10mm thick plaster.

Artificial stone in floor, dado, staircase dtc woth cement concrete(4:2:1) with stone chips, laid in panels as directed, with topping made with oridinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg./ sqm all complete including all materials and labour.

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge.

Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.

M.S. or W.I. Ornamental grill of approved design joints contiously welded with M.S., W.I. Flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i)Grill weighing above 10Kg/sq.m. and upto 16 Kg/sq.m.

Wood work in door and window frames fitted and fixed complete, including a protective coat of painting at the contact surface of the frame. (a) Sal, Siliguri.

Panel shutter of door and window, as per design (each panel consisting of shingle planks without joints) including fittings and fixing the same inposition but excluding the cost of hinge and other fittings.

Supplying, fitting and fixing M.S. clamp for door and window frame made of flat bar, and bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per design. (i) 40mm x 6mm- 200 mm long.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100 mm x 75 mm x 3.50 mm

Iron socket bolt of approved quality fitted and fixed complete.

Iron hasp bolt of approved quality fitted & fixed complete…

Anodised alluminium D-type with continuous base plate hexagonal/round base .. Etc. 150 mm x 10 mm

Supplying, fitting and fixing hinge cleat Sal Malayasian

Supplying, fitting and fixing Buffer block Sal Malayasian

Supplying 1.5mm thk. M.S sheet as per design including cost of all labour and materils…

Ordinary grating bars made of round or square M.S. rods fitted & fixed in holes of window frames etc. complete.

Supplying, fitting and fixing UPVC Pipe110 mm with all necessary clamps nails including making holes in walls.

Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. (a) On steel window

Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. (b) On panelled door

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (a) On timber or Plaster surface .

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (b) On Steel or other metal surface .

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification)…

Providing decorative cement based paint. Two coats.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. A) Floor - With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles @ 2.91 Kg/m2 & joint filling using white cement slurry @ 0.20 Kg/m2., (a) Area of each tile upto 0.09 Sq.m, i) Other than Coloured decorative including white

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with…

Plumbing cost 7.5%

Electrical cost LS

Add GST,as applicable (CGST+SGST) @ 18%

Labour welfare cess @ 1%