Zilla Parishad Tender

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (iii) 16 mm dia. (c) 300 mm long

Supply and Erection of 8 M hight mini mast system (Bajaj/Crompton/Transil/Utkarsh make) with its accessories. Mast shafty shall be in one section, hot dip galvanized and suitable for wind velocity as per IS 875 part 3. it shall also include acessories for high mast including head frame. Top Dia 125mm & Bottom Dia 250mm with top and bottom thickness 4mm. It also include accessories for mast including frame with lantern carriage, PVC cable and junction box with all best quality water resistance incl header assembly to carry 6nos luminariee.

Supply and installation of SPV MODULE Indigenously manufactured PV module should be used. The PV module should have Poly crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 from an NABL or IECQ accredited Laboratory. The power output of the module(s) under STC should be a minimum of 250 Wp at a load voltage of 16.4 ± 0.2 V. The open circuit voltage of the PV modules under STC should be at least 21.0 Volts. The module efficiency should not be less than 27 %. The terminal box on the module should have a provision for opening it for replacing the cable, if required. A distinctive serial number starting with NSM will be engraved on the frame of the module or screen printed on the tedlar sheet of the module. TATA BP make.

Supplying fitting and fixing display board with MS sheet and chanel and hanging on the streel structure mentioning the short work details on the board.

Supply and Fixing 25W Integrated Solar Streetlight suitable for perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for pathway marking and community lighting. Housing in Aluminium Alloy body which makes it water & rust proof with IP65. Enclosed inside the unit Multi cell LFP Technology BATTERY Lithium Ion/Oxide 30Ah+1%, 12.8V+0.4V, Max Continuous Discharge current (w/o PCM) upto 42A, should conform to the latest BIS/ International standards which is charged by a highly effiecient mono-crystalline solar panel. The LED luminary delivers close to 120 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Philips confirmed to BIS specificatoon. The light must have dust to drawn system to auto control the device. The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself. A manual ON/OFF switch has also been provided so that the light can be switched OFF when not in use for a long time. As per Standared Specifications

Add GST @ 18%

Add LWC cess @ 1.0%