Zilla Parishad Tender

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. I. SAIL/TATA/RINL

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (ii) 20 mm dia. (c) 600 mm long

Supply and installation of SPV MODULE Indigenously manufactured PV module should be used. The PV module should have Mono crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 from an NABL or IECQ accredited Laboratory. The power output of the module(s) under STC should be a minimum of 200 Wp at a load voltage of 16.4 ± 0.2 V. The open circuit voltage of the PV modules under STC should be at least 21.0 Volts. The module efficiency should not be less than 27 %. The terminal box on the module should have a provision for opening it for replacing the cable, if required. A distinctive serial number starting with NSM will be engraved on the frame of the module or screen printed on the tedlar sheet of the module. TATA BP make.

Supply and Fixing All in one 60W Integrated Solar Streetlight suitable for perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for pathway marking and community lighting. Housing in Aluminium Alloy body which makes it water & rust proof with IP65. Enclosed inside the unit Multi cell LFP Technology BATTERY Lithium Ion/Oxide 60Ah+1%, 12.8V+0.4V, Max Continuous Discharge current (w/o PCM) upto 42A, should conform to the latest BIS/ International standards which is charged by a highly effiecient mono-crystalline solar panel. The LED luminary delivers close to 120 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Philips confirmed to BIS specificatoon. The light must have dust to drawn system to auto control the device. The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself. A manual ON/OFF switch has also been provided so that the light can be switched OFF when not in use for a long time.

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

ADD GST@18%

ADD CESS@1%