Zilla Parishad Tender

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. [Rate from the rate analysis attached herewith] (Page 26 Item 10)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs beams columns lintels curved or straight including fitting fixing and stricking out after completion of works ]A) 25 mm to 30 mm thick wooden shuttering Ground Floor P-42,Item No.36(a)

Reinforcement(for reinforced cement concrete work) in all sorts of structures incl. distribution bars, stirrups, binders etc of rods incl. supply initial straightening and removal of loose rust (if necessary) cutting to requisite length, hook and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection complete as per drawing and direction.a) TOR STEEL FOR GROUND FLOOR ( Quantity of steel subjected to change)Other than SAIL/ TATA/RINL [P-43,Item No.40(a)(i)] Ground Floor

125 mm thick brick work with (1:4) sand cement morter incl.scafolding, curing etc all complete with 1st class brick [P-16,Item No.16] Ground Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary First Floor(b) With 1:4 cement mortar, 10 mm thick plaster.Ceiling (Ground Floor)

(b) With 1:6 cement mortar, 20mm thick plaster. Inside wall (Ground Floor)

(d) With 6:1 cement mortar, 15 mm thick plaster. outside wall Ground Floor

Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. multicavity hollow chamber of 59mmx30mm section with 2.0mm(2.0mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and one solid polymaric/M.S. galvanised tubular L-shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges, polymer based multicavity hollow section of 120mm x 30mm with 2.0mm (2.0mm) wall thickness will be placed in the middle, reinforced by solid polymar bar of 200mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by P.V.C. panels of size 100mm x 25mm with wall thickness 1.2mm (2.0mm) and 2 nos of 6mm dia bright rod will be inserted horizontal with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour and hire of tools and plants and appliencles.Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, haps bolt, tower bolt, door ring etc.. In Ground floor. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, haps bolt, tower bolt, door ring etc.. In First Floor. P.V.C. Door Shutter 30mm thick. [P-134,Item No.26)]

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 10 Kg./sq.mtr up to 16kg/sqmtr. (Add. extra @1% for each addl. floor upto 4th floor)[P-104,Item No.13] Ground Floor

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (Add extra @ 1.2 % for each additional floors upto 4th floor) b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] (P-107 , Item No.20)

White washing including cleaning and smoothening surface thoroughly (5 parts of stone lime and 1 part of shell lime should be used in the finishing coat).All floors : (a) Two coats (on new works only). Inside wall [P-194,Item No.1(b)]

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly : (ii) External surface (Ground floor) (b) Two coats (on new works only). (i) other than yellow, Pink (P-194 Item No.4)

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).[Page- 79 / ltem. No.4] (Sanitary Schedule)

Supplying, fitting and fixing bib cock or stop cock.(g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm. [P-7,Item No.7(a)](Sanitary Schedule)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (P-89, Item No.4) (Sanitary Schedule)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative (P-64, Item No.35)

(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) (ix) 100 mm dia. / 110 mm dia. [P-11, Item 18 (ix)]

Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63] A. 6 Kg / Sq.Cm. (Working Pressure) 110 mm

Construction of permanent sign board carrying inscription of fund, cost involved, commemcement date & completion date.

GST Charges

Cess