Zilla Parishad Tender

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. I. SAIL/TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor) With 1:4 cement mortar. c) 10 mm thick

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (iii) 25 mm dia. (c) 750 mm long

Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x3.04 mts long and 1x4SWG GI wire (1Mts long) 13mm x 80mm dia GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection (1mtr. Long ) to be filled with bitumen as to GS. for soft soil ISI Medium GI Pipe.

Supply and errection of 8 M hight mini mast system (Bajaj/Crompton/Transil/Utkarsh make) on existing RCC foundation with its accessories. Mast shafty shall be in one section with steeel materials onfirming to BSEN 10025 and material shall be high tensile steel grade S335, hot dip galvanized and suitable for wind velocity as per IS 875 part 3. it shall also include acessories for high mast including head frame. Top Dia 150mm & Bottom Dia 410mm with top and bottom thickness 4mm. It also include accessories for mast including frame with lantern carriage, PVC cable and junction box with all best quality water resistance. Must have lader hook as per technical specifiaction.

Supply, Fabrication & Fixing GI header/structure for fixing of 5 nos Flood Light made of 6x65mm Dia 500mm long CHS pipe and MS angle frame 40x40x6mm structure tip portion is cover with 750x750x3mm thick top plate welded with angle frame structure 4 nos angle frame each 300mm long. The header is also extra supported by 4nos vertical angle of above specification including providing of 6nos hole for locking/checknut device with the frame size) 300x300 mm to the top & ST pole for fixing 6nos Flood. the complete header is also strengthening with design MS flat size 500mm 6mm thick including scoffloling arrangemetn for lifting the same at the top of 8mtr long ST pole as per diretion of EIC including painting.

Supply of 27W (including all losses) All in One Solar LED Street Lighting System with minimum system lumen output of 4800 lumens, system lumen efficency should not be less than 180 lumens/watt, 12V 60Watt Peak PV Module, 380 Wh Lithium Ferro Phosphate (LiFePo4) battery, Integrated MPPT charger with .................................... and Protection of IP 65. It has in-built motion sensor and LED indicator for Charging and discharging of battery. The luminaire provides 2 days battery backup with factory setting dimming profile & PIR sensor. It has Horizontal & Vertical Pole Mounting options and Tilt angle can be adjustable in between 0 - 15 degree. LM 79 report and Type Test Certificate to be submitted for luminaire, LM 80 report for LED source issued by LED manufacturer and Test reports of Solar PV module, Ba+B502ttery and Charge Controller. Philips Make Sunstay “BRP710 LED48 CW MR S1 12V LFP Solar IN” or Similar Specification of Havells/Bajaj make. With Three years Manufacturer Warrenty.

Supply & Fixing Information Sign Board 750 x 450mm fabricated with MS Sheet 16SWG and ISA frame 25x25x4mm including Painting and lettering with approved paint as per instruction of authority.

GST 18%

Cess 1%