Zilla Parishad Tender

B/(a)/(ii) Other than Coloured decorative including whit

Supply PVC rigid pipe of approved make of (medium duty)confarming to ASTMD-1785 and threaded to match with G.I pipe as per IS 1239 part with all necessary ……… in any position above ground. (Page No-12,Sl No-19(i)) ii) 20 mm dia medium quality

iii) 25 mm dia medium quality

v) 40 mm dia medium quality

"Supplying fitting fixing white vitreous cina best quality approved make wash basin with CI brackets on 75 mm x 75mm wooden block make wash basin…….including manding good all damages and painting the brackets with two coat approved paint. 550 x 400 mm size ."

Supplying fitting fixing approved make pedestal for wash basin (white)

"Supplying fitting fixing approved brand 32 mm dia waste pipe with PVC coupling at one end fitted with necessary clamps. ii) 750 mm long . "

"Supplying fitting fixing Bib cock or Stop cock. A) (i) Chromium plated bib cock short body(equivalent to code 511 and model tropical.) "

Supply fitting fiixing plated stop cock( Equivalent to code no-513(A) & 513(B) & model -tropical /sumting special of ESSCO or similar brand)

"Supplying fitting fixing shop holder b) fibre glass "

"Supplying fitting fixing towel rail with two bracket. A) C.P over brass. 25 mm dia & 600 mm long."

"Supply UPVC pipe (B-Type) & fitting conforming to IS 13592-1992 II)Single socketed 3.00 mt length (Page No-66,Sl No-23(A)( i))"

"Supplying fitting fixing shower of approved brand & make. A) (i) Chromium plated round shower when revolving joint 100 mm dia with rubid cleaning system(equivalent to code no 542(N) & model -tropical /Sumthing Spical of ESSCO or similar brand."

Supplying fitting and fixing in position approved P.V.C. door frame made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm / 60mm x 53mm and suitably reinforced, horizontal section will be joined with vertical section by steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 18 gauge will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner and steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials taxes and all other incidental charges complete.

"Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.5mm wall thickness, the section will have 2 nos. built in heads, horizontal & vertical section shall be fixed to each othe by self tapping screws and 2 nos. of M.S. tubular galvanised brackets of length 200 mm x 80 mm and other 100 mm x 100 mm both 18 gauge in each corner of the shutter frame for placing hinges, polymer based multicavity holoow section of 25 mm thickness will be fitted in the middle with alluminium cleat and steel screws as lock rail, the section frame will then be fitted in by polymer based panels of suitable size and 2 nos. of 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of 100 mm. Anodised alluminium hinges and cost of all materials and labour, hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete. (Width of shutter ranging from 0.60m to 1.20m and height ranging from 1.83m to 2.10m.)" (a) 37mm thick shutter with 20mm thick panel (wall thickness 1.2mm) and 90mm width styles and rails with lock rail 105mm.

Synthetic distemper to interior wall ceiling with a coat of solvent based interior grade acrylic primer (as per manufacture's specification) including cleaning and smoothning surface (two coats).

Wiring with 2x1 mm PVC copper wire, cassing bit 1'' and others necessary material including ancor switch fixing on PVC board avarage run 8 mt for light & fan point.

Supply and fitting fixing tube light approved brand.

"Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor" a) False Ceiling (with 4mm thick Fibre Cement Standard Ceiling Board and E Grid T-243

"Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code." a)(i) For 10 users B) With Bazree (N.B Varity) (SAIL/TATA/RINL) B) With Bazree (N.B Varity) (SAIL/TATA/RINL)

"Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia" (SAIL/TATA/RINL)

Citizen Information Board

GST @ 18% of gross amount

Labour Welfare Cess @ 1% of gross amount