Zilla Parishad Tender

PWD(WB), BUILDING WORKS, Page-35, Item-22 (B) (ii) (a) Cement Concrete with 30mm down graded Shingles excluding shuttering (1:3:6) in foundation :

PWD(WB), BUILDING WORKS, Page-26, Item-10 (ii) Ordinary cement concrete ( mix 1:1.5:3) with graded stone chips (20mm down excluding shuttering and reinforcement,if any in ground floor. As per relevent I.S. Codes.

PWD(WB), BUILDING WORKS, Page-42, Item-36(f) 7(a). Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fiXing and striking out after complection of works. 25 mm. to 30 mm. thick wooden shuttering without staging in foundation as per decission & direction of E-I-C.

PWD(WB), BUILDING WORKS, Page43, Item-40(a)(ii). Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. (b) EXtra for works beyound the roof of ground floor/ initial 4.0m . (i) Upto 4th floor roof in each addl. Floor

Item No.- 16; Page No.- 16 of PWD Bldg. Schedule 125 mm th. brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Item No.- 7(a); Page No.- 15 of PWD Bldg. Schedule Brick work with 1st class bricks in cement morter (1:4)

PWD(WB), BUILDING WORKS, Page-189, Item-01. Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor).

Item No.- 6; Page No.- 48 of PWD Bldg. Schedule Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with toping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all, materials and labour.

PWD(WB), BUILDING WORKS, Page-104, Item-13. (a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows, railing etc. fitted and fiXed with necessary screws and lugs. Grill weighing above 10 kg./sq.m.and upto 16kg/sq.m.

PWD(WB), BUILDING WORKS, Page-200, Item-01(a) Priming one coat on Steel or Metal surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc.

PWD(WB), BUILDING WORKS, Page-201, Item-2(a) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary.

PWD(WB), BUILDING WORKS, Page-192, Item-05. Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.

(Item no-6, Page no -37 of PWD S&P schedule ) Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multi layer. 1000 litre Capacity.

PWD (WB), S & P WORKS, Page-50, Item-2. Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.

PWD (WB), S & P WORKS, Page-13, Item-19(III) A. Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).

PWD (WB), S & P WORKS, Page-52, Item-5. Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.

Non Schedule item for supply item. Supply, delivery & installation of 1000 watt peak capacity Solar Photovoltaic aray panels along with 1.00 H.p. capacity Solar Photovoltaic Submerssable pump set (1000 Watt, designed to use with Solar Power) that can deliver from 1 gallon (3.79 litrs) per minute to over 75 gpm.installed with in a New Tube well of approved brand whose output is not less than 4000 Ltrs/hour at 40 Mtrs. head including supply of all necessary materials viz. required dia column pipes etc. as specified of approved quality. labour etc. with all allied works as per direction of the E.I.C. (Solar Photovoltaic Submerssible Pump and controller should carry a warranty at least of 1 (one) year directly from the manufacturers)[ Specifications: Motor: Permanent Magnet, Thermally Protected, 24 Volts DC,120 Watts,4.0 Amps Max,Fuse: 7.5 Amp, Automotive Internal Bypass: 105-110 P.S.I. Max 12"L x 3.75"D 6 lbs. Maximum Lift: 230 feet, Maximum Submersion: 100 feet .]

Non Schedule item for supply item. Supplying, fixing, commissioning and testing pump controller unit consisting with PCU Switching elements MOSFET Type of Charger PWM with MPPT technology Input from PV 800 max to 370V DC, 1 to 1.5 HP, single Phase with protection Short circuit, Deep discharge, Input surge Voltage, over current, Battery reverse Polarity, Solar array reverse polarity........ 200 mm above ground level all system parameters shall be displayed System parameters LCD display such as battery voltage, output(load) voltage, load current etc ::: (Kriloskar/ Sukam/ Exide/ ISI Approved) make

M.S. structural works in columns, beams etc. with simple rolled structural members(e.g. joists angle, channel sections conformingto IS: 226, IS : 808 & SP (6)- 1964 connected to one another withbrackat, gussets, cleats as per design, direction of Engineer- incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming tolS: 1956 & IS using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erectional complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all toolsand plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 kg/m

Non Schedule item for supply item. Solar Iron Purifire Machine The Water Purifier Machine remove the iron and other impurities from the water and also kills bacteria through a UV lamp. The enter power comes from solar energy and there is no battary storage. The solar energy is stored in the form of pure water which will be adequate for two days of backup.

Supply & installation of PVC Pipes - 25mm dia

Supply fitting and fixing of 15 mm dia Bib Cock

Supplying fitting and fixing of Signboard and cost of photograph (payment will be made as per voucher)

Add:- GST @ 18%

Add:- Cess @ 1%