Zilla Parishad Tender

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 ofapproved make and brand fitted and fixed as per design as per approval anddirection of Engineer-in-Charge. [excluding the cost of supporting frame workand teak wood batten/Lipping]In Ground Floor (iv) 12mm

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 ofapproved make and brand fitted and fixed as per design as per approval anddirection of Engineer-in-Charge. [excluding the cost of supporting frame workand teak wood batten/Lipping]In Ground Floor(iv) 19mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 asper approved make, brand, finish and thickness with fitting, fixing the same onParticle/MDF / Ply Boards with recommended / approved adhesive with properclipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental chargesthereof. In ground floorGlossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.0mm

Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door ofsolid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges andother fittings

b) Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I. S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws.

c) Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I. S. 204/74 fitted and fixed with cadmium plated screws.

g) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Painting with best quality synthetic enamel paint of approved make and brand smoothening surface by sand papering etc. i.e., …….. Using of approved puttty etc. 2 coat on wooden surface with other than hi-gloss of quality in ground floor.

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).Bottom frame

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).Top mand side frame

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture,adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-198712mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II)

125 mm thick brick work in cement morter 4:1 in ground floor

15 mm thick cement plaster with cement morter 4:1 in out & inside wall in ground floor

Nominal Mix Cement concrete (1:1.5:3) with graded stone chips (20 mm down) excluding shuttering and reinforcement if any, Rajmahal variety in ground floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. in ground floor.(i) Tor steel/Mild Steel Other than SAIL/ TATA/RINL

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thic with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stonesproperly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab 0.6 upto 1.0 square metre.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/s

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.600 mm X 450 mm

Supplying, fitting and fixing glass shelf with aluminium guard rails. (a) Ordinary type with 5.5 mm sheet glass. (ii) 600 mm X 125 mm

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Supply fitting fixing towel rail with two brackets (a) C.P. over brass (iii) 25 mm dia. and 750 mm long

Supply fitting and fixing CP Bib Cock /Stop Cock ofChromium plated Bib Cock short body (equivalent to Code No. 511 & Model-Tropical/sumthing special of ESSCO or similar brand)

(i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

Louver for panelling

Electrical Cost

Sofa set, dining Table , chair cost

Sub Total

GST 18%

Cess 1%