Zilla Parishad Tender

Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety (a) 1:3:6 proportion

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. (ii) River bazree

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, bindersetc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(I) Tor steel/Mild steel I. SAIL/TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging up to 4 m. using approved stout prop and thick hard wood planks of approved thickness with required bracing for concrete slab, beams, columns, lintels curved or straight including fitting, fixing, and striking out after completion of works. (upto roof of ground floor.) (f) 25mm to 30mm shuttering without staging in foundation etc.

125mm thik brick work with1st. Class briks in cement mortar (4:1) in ground floor.

Plaster(wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as dir-ected and raking out joints or roughening of concrete surface, including throating, nosing and drip course where nece With 6:1 cement morterssary. 15 mm thick plaster

M.S. & W.I. Ornamental grill of approved design with MS flats or bars with joints continuously welded for windows railing etc. fitted and fixed in position with lugs and screwsand lugs in G.F. (i) Grill Weighting about 16 kg/sq.mtr and above

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. On steel surface

Painting with best quality synthetic enamel paint of approved make including smoothening surfaces thoroughly.. Two coat. On steel surface With super gloss (hi-gloss) (iv) Two coats

Neat cement punning about 1.5 mm th. In wall, dado, windowsill, floor drain etc. NOTE :Cement 0.152 cu.m.per 100 sq.m.

Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor. (b) 25mm mesh

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. (iii) Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. vii) 100mm. X 58mm. X 1.90mm

Iron socket bolt of approved quality fitted and fixed complete. (d) 225mm long x 10mm dia bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (ii) 100 mm grip x 10 mm dia rod.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground Floor Two Coats

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a) On timber or plastered surface. With super gloss (hi-gloss) - iv) Two coats (with any shade except white)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity

Suppying fitting and fixing and installation of water pump with motor 1 HP (Bis satndards & including panel board 1HP)

Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)

Supply & Erection of single steel tubular pole of 5.0mtr long with sole plate & cap etc in cc foundation (proportion and dimention indicates beiiow ),having 600 x600x 150 m thick cc (4:2:1) base block bellow sole plate /pole with hard jhama metal including cc (6:3:1)muffing 0.30mts dia and 0.30 mabove ground levelincluding 3mm thick neat cement ted finish and GI Earth bolt after making holes etc.on the pole.

Extra above for providing cc (6:2:1) base block (around the pole )dimention 0.60x0.60x .75 mt above ground level.neat cemented finish (3mm thick )at the base pole (in lieu of cc muffing ) incl. Providing drilled hole in the pole suitable for alkathine /polythine pipe as directedfor street light wiring.

Supply & fixing (15-20) W & (2000-3000 )lumens all in one LED integrated Solar streetlight suitable for perfect solar system solution for remote & off grid locations as well as farmhouse, gardens and parks for pathway marking and community lighting .Housing in Alluminium Alloy body which make it water & rust proof with IP65.System wattage should not be less than (17-20) (+/-5%), system lumen efficency should not be less than(150- 175 )lumens/ watt, Battery chemistry Lithium Ferro phosphate ( LiFePo4) battery must be used, Battery capacity 256Wh, Charging electronics integrated MPPT charger with driver, charger efficiency 90% ,Driver efficiency 90% , LED buring house should be 50000Hrs @L70 ,IP rating 65 , CCT(Colour Temperature) 5700K CRI70 Luminare should have in built FRI Sensor, Charging and Discharging LED indigator should be provided in luminari, input voltage 12V DC/r , Adjustable till angle should be 0-15 deg ,Solar cell efficiency min 12%, polycrystalline , Safety of solar panel module IEC 61730-1,2 & EIC61215, manufacturer should provide LM79/LM80 reports corresponding to the luminaire/LED chip along with Type Test Certificate Warranty-3 years.) make - Havells/Crompton /Bajaj )