Zilla Parishad Tender

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 20 mm. thick

ire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood plants of approved thickness with required bracing for concrete slabs, beams and coIumns,lintels curved or straight including fitting, fixing and striking out after completion of orks. 25 mm to 30 mm thick wooden shuttering as per decision direction of Engineer-in-charge.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (i) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars,stirrups, binders etc.initial straightening and removal of loose rust(if necessary), cutting to requisite length, hooking and bending to correct shape,pIacing in proper position and binding with 16 gauge black annealed wire at every intersect- ion ,complete as per drawing and direction. Other than SAIL/ TATA/RINL OTHER MAfWFAOTIJRERS NOT SPECIFIED

125 mm thick brick work with 1st class bricks in cement mortar(1:4)

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr

Plaster (to wall, fIoor,ceiling etc.)with sand and cement mortar inclu- ding rounding off or chamfering corners as directed and raking out joints including throating,nosing and drip course, scaffolding/staging where necessary. With 1:6 cement mortar (a) 20 mm thick plaster

Plaster (to wall, fIoor,ceiling etc.)with sand and cement mortar inclu- ding rounding off or chamfering corners as directed and raking out joints including throating,nosing and drip course, scaffolding/staging where necessary. With 1:4 cement mortar (b) 15 mm thick plaster

Plaster (to wall, fIoor,ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating,nosing and drip course, scaffolding/staging where necessary. With 1:4 cement mortar (C) 10 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

White washing including cleaning and smoothening surface thoroughly. (c) Three coats (on new works only).

Colour washing with any shade with Stainers, as required includingcleaning and smoothening surface thoroughly : (ii) External surface (Ground floor) (b) Two coats (on new works only). (i) Other than yellow, pink.

Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet mitercut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided throughout the frame. The door frame shall be fixed with the wall using 65/100 mm longM.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos ofscrews to be provided for each vertical member and minimum 2 Nos forhorizontal member etc. complete as per Manufacturer‟s specification anddirection of Engineer-in-Charge.

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC DoorShutter consisting of outer frame made out of M.S. tubes of 19 gauge thicknessand size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have costof steel primers of approved make and manufacture, M.S. frame covered with 5mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out ofwhich 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle oneither sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top &bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock railsshall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm widecross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th.both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles&rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner sideand joined together with solvent cement adhesive. An additional 5 mm th. PVCstrip of 20 mm which is to be stuck on the interior side of the “C” channel usingPVC solvent adhesive etc. complete excluding all necessary hardwares as perdirection of Engineer-in-Charge.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (i) Other Local Wood.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) (c) Other Local Wood.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : (iv) Two coats (with any shade except white)

Supplying, fitting and fixing M.S. clamps for door and window frame made of flatbent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) asper direction. (Cost of concrete will be paid separately) (c) 40mm X 6mm, 125mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISImark. (iii) 75mm. X 40mm. X 1.12mm.

Anodised aluminium Aldrop/sliding bolts of approved quality manufactured from extruded section coforming to I.S.specification (I.S.2681/66)fitted and fixed complete. 250 mm X 19 mm dia.bolt.

Anodised aluminium D-type handle of approved quality manufactured from extruded section coforming to I.S.specification (I.S.230/72)fitted and fixed complete. 100 mm grip X 12mm dia road

Iron socket bolt of approved quality fitted and fixed complete. (a) 75mm long x 10mm dia bolt.

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipe. 15 mm dia

20 mm dia

25 mm dia

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L

Labour for punching hole in plastic water storage tank upto 50 mm dia (a) Upto 1st story from G.L

Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing). (ii) 510 mm long

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (b) White vitreous chinaware (ii) 600 mm X 150 mm

Supplying, fitting and fixing bib cock or stop cock (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (ii) Double Socketed 3 Meter Length (b) 110 mm

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar(1:4)including two 560 mm dia.R.C.C.man-hole cover(heavy type)of approved make suppIied,fitted and fixed in the 100 mm thick(1:1.5:3)top slab with necessary fittings,20mm thick cement plaster(4:1)finish to the internal surfaces and 15 mm thick cement plaster(4:1)to out side wall upto 200 mm below G.L.floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3)bottom slab inclu- ding suppIying,fitting and fixing all necessary specials,fittings,S.W. tees,C.I.foot rest etc.including excayation earth in all sorts of soil, soring,baiIing out and pumping out water as necessary,trimming, dressi-ng the bed and refilling the sides of the tanks with earth, removing spoiIs,filling up the chamber clear water,removing foreign materials from the chamber from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessay pipes,joints etc.with integral plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5 % by weight of cement with all costs of labour and materials. With Pakur Variety (OTHER MANUFACTURERS NOT SPECIFIED)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size)including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. Other than (SAIL/TATA/RINL)

Marbel Falak 250 X 400 sq.mm including Fitting & fixing in position with cement morter and necssary brick work (1:4) as per direction.

Add CGST & SGCT @ 18%

Add L W Cess @ 1%