Zilla Parishad Tender

Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. North Bengal variety M-20 Grade Using concrete mixer

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Tor steel / Mild steel Other than SAIL / TATA / RINL

Constru¢tion of circular soak well 2.5 metre deep in ali types of sandy soils with dry brick work upto 1.6 metre from tfie bottom having 150 mm intermediate cement brick work II:4) band all round and cement brlck work (ł:4l upto 0.90 metre from top with 20mm thick cement plastering {1:4) to inside face upto the depth of cement brick work, 15mm tfiick cement plaster {t•4) on outer face from top of tfie well upto G.L. and E mm thick cement plaster (1:4} on top of the R.C.C. cover slab IncludTng filling bottom 1.00 metre of Tnside of the well witŁi brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm Łh ck with cemen conc (I:1.S•3) with stone chips with necessary reinforcement and shuttering including one 560 mm dla. R.C.C. manhole cover (heag type)of ąpproved make supplied, fitted and fixed in the cover slab witL necessary fittings, making nacessary arrangements for pipe connections excavation of well including shoring, dewatering and removing the exess eanh from tle premises as ęer direction compTete in aTT respect with al costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (I:6) and 3.00m inside dia. ISAIL/TATA/RiNŁ [ Ref. : Page no.265, Item no.8.07

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC fabric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in- Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)

Add GST @ 18%(9% for CGST+9% for SGST) .=Rs

Add Labour Welfare Cess @ 1% on C.=Rs