Zilla Parishad Tender

:Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(i) 50 mm dia.

d) 32 mm dia.; Medium Quality (Column pipe )

b) 25 mm dia.

Installation of purification machineries with all accessories in proper method with filling activated alumina etc. or any other patent as recommended by American water works Corporation and as directed by the authority including cost of containers, chemicals and other accessories complete in all respect upto the satisfaction of the authority. The rate is including of all taxes and incidental charges in this connection. (Non Scheduled). a) UV- sterilizing system / or equivalent system

b) Oxidation system with vessel / or equivalent system

c) Pre Filter ( Iron Filter ) / or equivalent system

Community Based Sajaldhara Plant Supplying,fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. Construction of chamber for 100mm sluice plates. a) 15 mm dia.; Medium Quality

b) 20 mm dia.; Medium Quality

c) 25 mm dia.

:Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in betwwen the outside of the tubewell pipe and the bore.(a)For depth upto 150 metre for 50 mm dia. Tube well with top enlargement of 100 mm dia.(i) 50 mm dia. boring etc

c) 25 mm dia.; Medium Quality

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayera) 3000 litre capacity.

Supplying G.I. pipe strainer with brass net & jacketted of approved quality. (Heavy Type)a) 50 mm dia of Medim quality.

Supplying, fitting and fixing alloy iron with brass spindle stop cock/ bib cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.a) 15 mm dia.

b) 20 mm dia.

Consruction of brick masonry padestal / platform of diamensions 4000mm X 3000 mm or as directed of height upto 1200 mm from GL and consruction of masonry masonry surface drain with necessary foundation consisting of earthwork, PCC (1:3:6),1st class Brick-work (1;6), RCC (1:1.5:3), reinforcement work , cement plaster (1:6) ; neat cement pinning etc. etc. complete in all respect as per Departmental drawing upto the satisfaction of the authority. .Payment will be made on executed items as per PWD SOR (Central circle/ Nadia) effect from 01.12.2015 read with 2nd corrigenda)

Add 1% Cess as applicable

c) 20 mm dia.

Installation of submerssible pump with motor having apacity of 1.0 HP (Kirloskar / Crompton) of model- 3W10B (CG) or as approved by the authority including supplying, fitting, fixing the same in proper position, true to line , level etc. icluding the cost of electrical connection with flat cable, casing, switch etc. and other accessories complete in all respect upto the satisfction of the authority. (Non-scheduled/ As per analysis)

Two coats painting with best quality synthetic enamel paint of approved make and brand (With other than Hi-gloss of approved quality any shade except white) including smoothening surface by sand papering etc.A) On steel or other metalled surface

Labour for hoisting plastic water storage tank from ground level to the roof of second floor. (a) Upto 1st story from G.L.

Priming one coat on steel or other metalled surface with synthetic enamel or oil bound primer of approved quality including smoothening surface by sand papering etc.A) On steel or other metalled surface

Embossing nomenclature and other particulars of the scheme as directed on a 15 mm thick marble plate of size 600 X 450 or as directed fitted on brick padestal (250 mm thick) duly plastered upto 1.0m height on 75 mm th. PCC (6:3:1) stone aggregate in foundation as per drawing all complete as directed including lettering all complete upto the satisfaction of the authority.(Non Scheduled)

M.S. structural works in columns, beams etc.with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP 6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, nsumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. a) ) For structural members of specified sections weighing less than 22.5 Kg./m

b) 50mm dia of Medim quality.

Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 50 mm X 100 mm.

(i) 100 mm dia. boring etc.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

Supply of G.I. pipes of TATA make including necessary sockets.a) 100mm dia of Medim quality.

e) Back wash Filter / or equivalent system

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg. per sq. cm. (for water lines only.)a) 32 mm dia.