Zilla Parishad Tender

Item No.36(f), Page No: 42 of 315 (As per Building schedule):- Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation.

It. No. 10(ii)// Page No. 24 of 315 ( Building Schedule ) :- Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

It. No. 1(ii-b)// Page No. 189 of 315 ( Building Schedule ) :- Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] b) with (4:1) cement plaster (i) 15mm thick plaster

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.

Page-13/ It No-19(11) of (A)-(II) G.I. PIPE WORKS AND FITTINGS Supply of PVC pipes & fittings Schedule 80 (medium duly) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS: 1239 (Part - 1).

ii) 32 mm dia PVC (ASTMD) 6 Nos x 6.0 m = 36.00 mtr

iii) 25 mm dia PVC (ASTMD) 2 Nos X 6.0 m = 12.00 mtr

iv) 15 mm dia PVC (ASTMD) 1 Nos X 6.0 m = 6.00 mtr

Page 62 of (A) (MI) TUBE WELL Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.

Laying Rising main, delivery main, Over flow, wash out pipe line with supplying, fitting, fixing PVC pipes of approved make (Medium duty) conforming to ASTMD -1785schedule -80 and threaded to match with G.I. pipes as per IS: 1239 (Part-I) with all necessary accessories, specials, viz socket, bend, tee, union, cross, elbow, nipple, longs crew, reducing socket, reducing to, short piece etc. 1 fitted with holder bats clamps including cutting pipes, making threads, fitting, ring etc. in all respect including cost of all necessary fittings as required, joining materials and two coats of painting with approved paint in any position above ground to feed the water nearest lo houses at least one habitation to gel water through stand post and complete the all works as per drawing & direction of the E.I.C. (Suggested brand :- Supreme / Oriplast /Long last).

Supplying, delivery & Erection of pre-fabricated M.S. Steel structure of 3.00 mtr. Height above G.L. for resting of 3000 LITRE, capacity HDPE water storage tank of approved brand capable 2 of extreme weather conditions including wind thrust up to 100 KM/Hour with Fixing of necessary MS ladder/railing and painting with appropriate weather coals including all allied works as per approved drawing and direction of the E.I.C.

Solar Submersible Pump 1HPA solar water Pump system is essentially An electrical pump system in which theElectricity is provided by one or several Photo voltaic(PV) panels. A typical solarPowered pumping system consists of aSolar panel array that powers an electric Motor, which in turn powers a bore orSurface pumpFeatures High Efficiency PV Module. 1320 wp With 330wp Module. Intelligent PumpController. DC-AC conversion to run 3 Phase AC

Installation of pump riser pipes, connecting rods, brass cylinder etc if required including supplying the required quantity spare parts of approved quality and fitting the same in position by engaging expert tube well mechanic & helper with necessary tools & plants after lowering of Solar Photovoltaic submersible pump set.

330WP solar panel specification Solar panels are constructed from ultra efficient polycrystalline and have been designed to provide a reliable and cost-efficient alternative energy solution for application where main power is either not available, or not desirable. Main features clever engineering makes for minimal power losses during prolonged period in shade. Fully weather-resistant -durable white tempered glass, EVA resin and weather resistant film aluminum frame.

Extra carrying charges for transportation of all materials related with the above work at working 6 site by any means or by manual labour time to time including head load due to inaccessibility of site if required with specific prior permission from the EIC

Solar Pump Controller The HT Solar Pump Controller is designed To run any electric single/three Phase Submersible pump or motor. The HT solar provides Water in remote location by converting High-Voltage direct current(DC) from a Solar PanelInto alternating current(AC) to run a standardAC Submersible Motor.

Wire, cable features,on-off Auto Censer Device & others The newly released 1500volt connectors are withhighest current rating among connectorsused PV DC application.It supports the cable range up to 16sq-mm forTUV and 6AWG for UL.With higher voltage, higher current, and wider cable range, our TUV/UL 1500V/1000Vseriesprovide an optimal solution for customers toachieve "Balance Of System."

Solar Iron Purifier Machine The water Purifier machine removes the Iron and other impurities from the water And also kills bacteria through a UV lamp. The entire power comes from solar energy And there is no battery storage. The solar Energy is stored in the form of pure water Which will be adequate for two days of back up.

(Page No-89 of 124,Item No. 4) :- Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(Other than SAIL/TATA/RINL)

Display Board

Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc

Add CGST & SGST @ 18%

Labour welfare cess @ 1%