Zilla Parishad Tender

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and fitting joints with powdered earth or local sand.

Cement concrete with 30mm down graded jhama khoa excluding shuttering. Pakur variety. 1:3:6

25mm thick Damp proof course with stone chips ( 1:1.5:3 ) double chequered with admixture of water proofing compound (approved quality @ 2% by weight of cement content).

Ordinary Cement concrete (M-20) 1:1.5:3 with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In ground floor as per relevant IS codes.

Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction (i) Tor steel/Mild steel. a) For works in foundation, basement and upto roof of ground floor/ upto 4 m

Brick work with 1st class bricks in cement morter (6:1) In foundation

125mm thick brick work in cement mortar (4:1) in ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (a) 20mm thick plaster. (i) With (6:1) cement morter.

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (b) 15 mm thick plaster 4:1

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (gr flr) (ii) With (4:1) cement morter, (c) 10mm thick plaster.

Artificial stone in floor, dado, staircase dtc woth cement concrete(4:2:1) with stone chips, laid in panels as directed, with topping made with oridinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including racking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg./ sqm all complete including all materials and labour.

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

M.S. or W.I. Ornamental grill of approved design joints contiously welded with M.S., W.I. Flats and bars for windows railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i)Grill weighing above 10Kg/sq.m. and upto 16 Kg/sq.m.

Supplying 1.5mm thk. M.S sheet as per design including cost of all labour and materils…

Ordinary grating bars made of round or square M.S. rods fitted & fixed in holes of window frames etc. complete.

Supplying, fitting and fixing UPVC Pipe110 mm with all necessary clamps nails including making holes in walls.

Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. (a) On steel window

Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. (b) On panelled door

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (a) On timber or Plaster surface .

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. With other than hi-gloss of approved quality (i) Two coats ( with any shade except white) (b) On Steel or other metal surface .

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification)…

Providing decorative cement based paint. Two coats.

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For trusses spanning up to 12.00 m

Supply fitting fixing Zn-Al alloy coating of 150 gm. Per sqm. Steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make.

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with…

Add GST,as applicable (CGST+SGST) @ 18%

Labour welfare cess @ 1%