Zilla Parishad Tender

Supply and Installation of Monocrystalline/ Mono Perc, IEC Certified solar panel with the following major specification: Capacity: 125 WP (ERTL and Flash tested), the module shall contain crystalline silicon colar cells and must have a certificate of testing conforming to IEC 61215. Power output of module under STC would be 21,0V, The module efficiency will be 14.5% minimum, The SPV module shall have a limited power loss of not more than 20% at the end of 25 years.(125wp*4=500 wp) Enviroment withstanddability : The Solar module shall be able to withstad the temp. extremens ranging from -10C to +85 C and thewind load of wind speed upto 180km/Hr. miximum meanhour rainfall of 40mm. Humidity leavel upto 95%. Framing : The panel made up with high efficient cell should be made up robust anodized aluminium frame with mounting frame with mounting holes. The strip must contain the following details i) Name of manufacturer. ii) Model no. or tyep no. iii) Serial No. iv) Year of manufacturing.

LED Luminaries 30 W with in built Lithium Battery Technology (Lithium Phosphate) 45 AH 12.8V with BMS Duckto Down MPPT Charge Controller. (ERTL and Flash Tested). I. Battery over charge cut off: 14.20 V ll. Battery deep discharge cut of : 10.2v III. Short circuit protection inbuilt with the system. The luminous 20 watt including water proof bracket lP 66 4200 lumen. with 5 years replacement warenty.

Supply and Installation of 9 meter long folding Galvanized iron pole with module mounting structure and Light arm. Description : 9 meter long GI pole with bottom 6 meter of 135 mm diameter and top 3 meter of 115 mm miameter. Thickness of pole shall be 3.6 mm. A corrosion resistant metallic frame structure must have provision to adjust its angle of inclination to the horizontal between 0 and 45, so that the module can be oriented at the specified tilt angle.