Zilla Parishad Tender

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (JSW/ JSPL/ Shyam/ SRMB/ BMASL)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (a) 25 mm to 30 mm thick wooden shuttering without staging in foundation

Holding down bolt with nut including 100x100x6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed (iii)25mmdia. (c) 750mmlong

Supply and Erection of 9m hight mast System (baja / Crompton/ Transil/ Utkarshmake) with its accessories. Mast shafty shall be in one section, hot dip galvanized and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame. Top Dia 150mm & Bottom Dia 410mm with top and bottom thickness 5mm. It also included accessories for mast including frame with lantern carriage, PVG cable and junction box with all best quality water resistance incl header assambly to cary 6 nos luminariee

Supply and installation of SPV MODULE Indigenously manufactured PV module should be used. The PV module should have Mono crystalline silicon solar cells and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 from an NABL or IECQ accredited Laboratory. The power output of the module(s) under STC should be a minimum of 200 Wp at a load voltage of 16.4 At 0.2 V. The open circuit voltage of the PV modules under STC should be at least 21.0 Volts. The module efficiency should not be less than 27%. The terminal box on the module should have a provision for opening it for replacing the cable, if required. A distinctive serial number starting with NSM will be engraved on the frame of the module or screen prlated on the tedlar sheet of the module. TATA BP make

Supply and Fixing Semi Intrigrated 60W Solar Streetlight suitable for perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for pathway marking and community lighting Housing in Aluminum Alloy body which makes it water & rust proof with IP55. Enclosed Inside the unit Multi cell LFP Technology BATTERY Lithium Ion/Oxide 60Ah ± 1%, 12.8V+0.4V, Max Continuous Discharge current (w/o PCM) upto 42A, should conform to the latest BIS/International standards which is charged by a highly effiecient mono-crystalline solar panel. The LED luminary delivers close to 135 lumens per watt and is made from the finest LEDs from Bridgelux/Oshram/Phillips confirmed to BIS specificatoon. The light must have dust to drawn system to auto control the device. The Streetlight is a plug & play unit and can be very easily mounted on walls or poles via the extensions provided with the product itself. A manual ON/OFF switch has also been provided so that the light can be switched OFF when not in use for a long time. (Havells/Bajaj Philips make)

Earthing with 80 mm dia Gt pipe (TATA-Medium)x 3.0 Mts, long and 1 No. 65 mm x 8 mm galvanized M (Hot Dip) steel strip (4 Mts. long), 20 mm dla x 125 mm long galvanized bolt, double nuts, double washers induding finishing both ends by making holes etc. and 5 & F 80 mm dia G1 pipe (ISI-Medium) protection (3 Mts. long) to be filled with biturnen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Earthwork in Excavation (a) Depth of excavation exceeding 1500 mm

Supply & Fixing Information Sign Board 750 x 450mm fabricated with MS Sheet 16SWG and ISA frame 25x25x4mm including Painting and lettering with approved paint as per instruction of authority.

GST 18%

Cess 1%