Zilla Parishad Tender

49.16.N.45 -- Supply of good quality fine Sand for 1000 Nos poly-pack for 8 inch X 6 inch . (1/4 of the tube)Good quality fine sand supply

49.16.N.46 -- Supply of good quality earth for 1000 Nos poly-pack for 8 inch X 6 inch . (1/4 of the tube)Good quality fine sand supply

49.16.N.36 -- Supply of Quick grown Species Seeds (QGS) for Nursery (up-to 10 different variety and for raising of 1000 saplings for each variety)QGS Seed (10 variety)

49.16.N.37 -- Neem oil cake for application in potted seedlings 5 gm X 1000 saplingsNeem khol or other Oil seed cake

49.16.N.38 -- Placard & documentation for Sapling variety @ single tag of 1000 saplings of same variety

49.16.N.50 -- Application of well de-compost dry cow dung for 1000 nos of pot at the time of pot filling. (pot size 8 inch X 6 inch)Farm Yard Manure/Cowdung (@ max 20% moisture content

49.16.N.69 -- Supply of Hycopot (Size 500 CC)Board for Plant variety nameHypopot (500 CC)

49.16.N.125 -- Supply of bamboo for net fencing work around the nursery area including net

49.16.N.126 -- Supply of Coco-pit brick for Hycopot ( for 1000 nos. pot) Coco Peat (Loose) not more then 10% moisture content

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no separate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8 m. in ground floor. For trusses spanning up to 12.00 M

Red oxide Zinc chromate primer

78.PNT.97.1 -- Painting with black japan over matal surface including sand papering, cleaning etc.ONE COAT.Black Japan

Display Board