Zilla Parishad Tender

Supplying and laying brick hkoa of ordinary bats of size (38mmx63mm)of approved quantity in 100 mm layer (loose)filling in gaps with small ones rammed and compacted as directed.

Ordinary Cement Concrete(1:2:4) with graded stone chips (20mm size) excluding shuttering and reinforcement, if any, in ground floor.A) Pakur / Chandil Variety

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor . 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement (i) 35 mm. thick

Ordinary Cement Concrete(1:1.5:3) with graded stone chips (20mm size) excluding shuttering and reinforcement, if any, in ground floor.A) Pakur / Chandil Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders, etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending,bindung complete.( Lead - 50 km) ii) SW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL a) For works in foundation, basement and upto roof of gr floor/ upto 4 m.

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, bems, columns, lintels curved or straight including foundation,a)Side shuttering (25 to 30mm )

a) 25mm to 30 mm thick wooden shutter as per dicision and diection of E-I-C.

Brick work with 1st class bricks in cement mortar (6:1)a) in foundation and plinth

Brick work with 1st class bricks in cement mortar (6:1)(a) in Superstructure (in ground floor)

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor with HB netting.

Plaster (to wall, floor, ceiling, etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor) a)20mm thick (1:4)

c) 15mm Th. plaster (1:6)

Neat cement punning about 1.50mm thick in wall,dado window sill etc all complete

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or bothfaces of M.S./ W.I. gate etc. with point welding at not more than150mm apart complete in all respect as per design including cost of all labour and materials.

M.S. of Jail type as per approved design made of strong M.S frame work, intermideate stiffness and round / square bars or angles M.S. sheet ( not less than 14 gauge ) gussets cleats etc including necessary riveting, bolting, welding, locking and hanging arrangement fitting and fixing complete as per direction of E-I-C.

White washing including cleaning and smoothening surface thoroughly. All floors : (a) One coat

Colour washing with any shsde with stainer as required including cleaning and smoothing surface throughly. External surface Two coat Other than Yellow , Pink

Colour washing with any shsde with stainer as required including cleaning and smoothing surface throughly. Internal surface Two coat Other than Yellow , Pink

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary(b) On steel or other metal surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. Therates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof 12 m span

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) b) With 0.63 mm thick sheet

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) B) 450 mm lapping each way b) With 0.63 mm thick sheet

Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150m a) 1.6mm +/- 0.2 mm thick sheet.(2.6Kg/Sq.m) i) Natural white or tinted blue colour

Galvanised or painted wind-tie made of M.S. flats, fitted and fixed complete including cost of necessary fittings. (b) Made with 50 mm. X 6 mm. flats Outer without opening

Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc VI) 25 mm. x 25 mm. x 12 g.

Supplying,fitting and fixing UPVC pipes-A type and fittings conforming to IS:13592-1992 with all necessary clamps nails,including making necessay holes in walls,floor etc. Cutting trenches in any soil through masonry concrete structure etc. If necessary ad mending good damages including joining with jointing materials (spun yarn,valamid and bitumen/M.seal etc) complete ,110mm dia UPVC pipes

B) UPVC Fittings c) Bend 87.5 Degree ii) 110 mm dia.

add GST 18%

add labour cess 1%