Zilla Parishad Tender

TIE 4X1.55X0.25

PLATFORM 1X2.00X4.00

(11) cement concrete with 30 mm down graded shingles Excluding shuttering In ground flor A) 1:3:6 proportion column foundation 4x0.075

platform 4.00x2.00x0.1.0

Boundary 12.00x0.15x0.10

Ordinary Cement concrete (mix1:1.5:3) with graded Column footing Stone chips (20mm nominalsize) excluding Shuttering and reinforcement, if any, in gound floor .As per relevant IS codes.b) River azree Column footing up to tie beam

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. SAIL/TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curvedor straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation 4x4x0.75x0.45

Column 4x4x0.45x0.55

TIE 4X2X1.55X0.25

PLATFORM 1X1X12.00X0.10

Boundary 1X2X12.00x0.10

Neat cement punning about 1.5mm thick wall dado, window sills, floor, drain etc. Platform 1X2.00X4.00

Labour for boring tube well of required dia, by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. 50mm dia. Boring etc.

100 mm dia. Boring etc.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS: 1239 (Part -1). (A) PVC Pipes 50 mm dia 9X6.00

100 mm dia 6C6.00

Supplying PVC strainer of approved make with adapter conforming to 1.S.12818 specifications. 50mm dia 2x3.00

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a) 1000 litre capacity

Labour for hoisting plastic water storage tank.Upto 1500 litre capacity.a) Upto 1st story from G.L.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing heavy type bell mouth reducing socket

Supplying, fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq.cm. 50 MM

Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. 71 MM

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816-1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg./m. or 15 % of weight for finished structal members weighing less than 22.5 Kg./m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. 1) For structural members of specified sections weighing less than 22.5 Kg./m

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007. with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.On steel or other metal surface

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: With super gloss (hi-gloss) - Two Coats except white in shade

Construction of circular soak well 2.5 metre deep in all types of sandysoils with dry brick work upto 1.6 metre from the bottom having 150 mmintermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.SAIL/TATA/RINL)

Supplying fixing commissioning and testing Solar Voltaic Module 250 WP 40V on existing iron frame structure each 156 mm Monocrystalline Silicon Solar cells laminated between sheet of Ethyline Vinyl Acilate (EVA) and high transmissivily 3 mm tempered glass. Confirming to IEC 61215(Revised) specification or equivalent National of International Standards. The power output of the module under STC should be minimum of 250W. The operating voltage corresponding to the power output mentioned above should be at least 57.0 Volts. The terminal box IP 65 Protection level on the module should have a provision for opening or replacing the module. (make- Wareel/Ands lite/ Havells)

Supplying, Fitting Fixing & Installation of Iron Removing Filter Plant Capacity 1500 LPH IR Media Filter Working-Downilow Max Flow Rate -3m3/hr Working Pressure-1-3 kg/cm2 Size-14"X65" Make Pentair (BIS Standards & Including 1 Year Warranty)

Supply and fixing round 2-core 4 sq-mm PVC multi core FR wire for aray connecting.

Supply and fixing MC4 Connector for panel loop.

Earthing with 50 mm (2") dia G.I. pipe 3.64 mm thick x3 mts. Long and 1x4 SWG G.I. Wire (4 mts. Long) 13mm dia. X 80 mm long G. pipe protection (1 mtr, long) to be filed with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 ms. Below the ground level & restoring the surface duly rammed.

Connecting the all equipment to earth busbar inciudng GI (Hot Dip) wire of size as below on wall floor..... as required and making connecion to equipment with bolts, nuts, washers cable lugs as required and mending good damages No. 4 SWG.

Providing and fixing conductor made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supply, installation testing &lowering of 1.5 HP oil Solar submersible pump motor set complete having Suitable discharge as per yield test of well. Submersible cable of 30 mtr 3-core 2.5 sq-mm cable with MOC bar chart and necessary control panel and starter asper manufacturer specification.[Make-kilosware / waree/shakte]

ADD GST @18%

ADD LABOUR CESS @1%