Zilla Parishad Tender

Brick work with 1st class bricks in cement mortar ( 6:1 ) (a) In foundation and plinth

(b) In superstructure, ground floor

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)

Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)

Ordinary Cement Concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, as per relevant I.S codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. For works in foundation, basement and upto roof

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary ( Ground floor )20 mm. thick plaster

15 mm thick plaster

Supplying 1.5 mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. (Doors + Window)

(a) M.S.gate of jail type as per approved design made of strong M.S. Frame work,……..as per direction of the EIC

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 35 mm. thick

Colour washing with any shade with stainers, as req. including cleaning and smoothening surface thorougly. (ii) Internal Surface (Ground Floor) (B) Two Coats (on new works only) (i) Other than yellow and pink

White washing including cleaning and smoothening surface thorougly. One Coat

Colour washing with any shade with stainers, as req. including cleaning and smoothening surface thorougly. (ii) External Surface (Ground Floor) (B) Two Coats (on new works only) (i) Other than yellow and pink

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface :Two coats (with any shade except white)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor..

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) 110 mm Dia

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Bend 87.5 degree 110 mm Dia

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 connected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc.Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work.Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members.The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. for spanning upto 12.00 m

Supplying, fitting & fixing Industrial Zn-AI Alloy (55% AI & 45 % Zn) coating of 150 grm .... EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (With 0.5 MM thick sheet).

Galvanised iron sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping). (A) 450 mm lapping each way b) With 0.63 mm sheet

Galvanised or Painted wind tie made of M.S. Flats, Fitted and fixed (b) Made with 50 MM X 6 MM flats

Supplying, fiiting,fiing chain link fencing of of approved quality with R.c.c post…..(iv) 75 mm X 75 mm x 6g

G.S.T

LWC