Zilla Parishad Tender

S/F fabricating, welding, fixing G.I. junction and 1.68 m long 40 mm dia single arm projection bracket made of G.I. pipe (ISI medium) with 2 nos. thro’ bolts & nuts of 175 mm (7") long 15.6 mm (5/8") dia incl S/F M.S pole cap at the top of junction with set screw etc. as per drawing and direction of Engineer-In-Charge.

Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x3mts long and 1x4SWG GI wire (1Mts long) 13mmx80mm dia GI bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection as to GS. By TATA Medium GI pipe for soft soil.

Painting of above 6m pole including header assembly and two coats of powder coating paint with approved paint including necessay transportaion from plat to worksite etc as required.

Supply and Fixing 15W & 2000 lumens All in one LED Integrated Solar Streetlight suitable for perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for pathway marking and community lighting. Housing in Aluminium Alloy body which makes it water & rust proof with IP65. System wattage should not be less then 15W (+/-5%), system lumen efficency should not be less than 135 lumens/watt, Battery chemistry Lithium Ferro Phosphate(LiFePo4) battery must be used, Battery capacity 18Ah, Charging electronics integrated MPPT charger with driver, charger efficiency90%, Driver efficiency90%, LED buring houre should be 50000Hrs @L70, IP rating 65, CCT(Color Temperature) 5700K, CRI70, Luminari should have in built PRI Sensor, Charging and Discharging LED indigator should be provided in luminari, input voltage 12V DC/r, Adjustable tilt angle should be 0-15Deg, Solar cell efficiency min 12%, polycrystalline, Safety of solar panel module IEC 61730-1,2&IEC 61215, Mnufacturer should provide LM79/LM80 reports corresponding to the luminarie/LED chip along with Type Test Certificate Warrenty-3years. warreny against manufacturing defect from date of supply Luminaire Make: Havells item code SSSSLX013 ENVIRO Solar All-In-One Equip In or equivalent specification of Philips/ Bajaj / C&S

Supply & Fixing Information Sign Board 500x300mm fabricated with MS Sheet 16SWG and ISA frame 25x25x4mm including Painting and lettering with approved paint as per instruction of authority.

Add GST @ 18 %

Add Cess @ 1%