Zilla Parishad Tender

Supplying high density polythene stainer of approved make with adapter conforming to I.S. specification. 50 mm dia.a ) 50 mm dia

Supplying fitting and fixing in position PVC pipes of approved make ( SUPREME/ORIPLAST/LONGLAST) of (Medium duty) conforming to ASTMD -1785 and threaded to match with G.I. pipes as per IS 1239 (part-I) with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment wiil be made for accessories,specials.) .[Ref: Sanitary & Plumbing works ,P-14,i-19.iii.A].a ) 50 mm dia

ii) 100 mm.dia.

Supplying fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials no separate payment wiil be made for accessories,specials,payment for painting will be made separately)80 mm.dia.

Supplying, fitting and fixing GI cap at top. 100 mm.[Ref: Sanitary & Plumbing works ,P-51,i-17]

Supply and installation of pump with motor (KSB / Crompton or of any other approved make and brand), installation, lowering, connecting with the controll panel with necessary cables, testing etc complete as per direction of the Engineer-in-charge including cost of all materials, equipments, labour and all other incidental charges, complete in all respect. 2H.P. Capacity (Three phase ).

Supplying fitting & fixing steel cutter piece upto 450 mm long with sockets. 50mm dia.i) 50 mm.dia

Supplying of 100mm x 50mm dia PVC reducing socket.[Ref: Sanitary & Plumbing works ,P-22,i-19(III).L]

Packing the annular space between the outside of the tubewell pepes and strainers and bore with pea size washed gravels of approved quality having size from 2 mm. to 5 mm. the size approved by E.I.C. including cost of materials Labours & equipment complete.

Supply of P.V.C pipe fittings (medium duty ) conforming to ASTMD 1785 and thread to Match with GI Pipes As per IS 1239 , Redicing Tee

Reducing Socket

Bend 90 deg

Bend 90 deg

Reducing Tee

Supplying fitting and fixing in position PVC pipes of approved make ( SUPREME/ORIPLAST/LONGLAST) of (Medium duty) conforming to ASTMD -1785 and threaded to match with G.I. pipes as per IS 1239 (part-I) with all necessary accessories,specials viz. socket,bend,tee, union,cross,elbow,nipple,short piece etc. including cost of all materials,jointing materials,cutting pipes,making threads,cutting trenches upto 1.5 m. below surface in all sorts of soil and reffiling the same as directed with two coats of painting on G.I. pipes and specials with bituminus paint complete in all respect.(payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment wiil be made for accessories,specials.)25 mm dia pipe

15 mm dia pipe

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer, 2000 ltr

Chromium Plated Bib Cock or Stop Cock.

Cost Of Oron remover Filter system, from Analysis

Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing / pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand (Payment to be made on measurements of finished quantity). (a) By Fine Sand.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.[

Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 4:2:1 proportion.

Brick work with 1st class bricks in cement mortar (6:1) in foundation & plinth.

Nominal Cement Concrete ( Mix 3:1.5:1) M-20 with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Pakur variety.

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. High Strength/Light Wall Pipe, Nominal Bore-50 x 2.9, Mass per Metre (kg/m)-4.21, i) For trusses spanning up to 12.00 m Supplying fitting and fixing Mild Steel Chequer Plate, Length x width (mm), 2400 x 1220, Eg: 2400 x 1220 x 6mm Chequer Plate.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Mild Steel Flats, Size(mm)- 40 x 8, Mass per Metre (kg/m)- 2.51, I) For structural members of specified sections weighing less than 22.5 Kg./m.Rectangular Hollow Sections, 75 x 50 x 6.0, Mass (kg/m)-9.67

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor). (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Supplying, fitting & fixing 1.5mm thick Trapezoidal profile corrugation Polycarbonate clear sheet made of national brand, excluding the supporting frame work, fitted and fixed with 10mm dia x 55mm Self-driving screws, EPDM washers and putty complete with 150mm end lap and one corrugation minimum side lap complete as per specification & direction of Engineer-in-charge including materials, labour, taxes and all other incidental charges (Payment to be made on area of finished work). In Roof.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white).

Sub Total

GST 18%

CESS 1%