Zilla Parishad Tender

S/F arm bracket of 55mm bore tubular pipe (M.S) of 1.5m (5') length for fixing on 75/ 100mm pole top including S/F 4mm thick M.S plate welded with bolts, nuts & clamps, etc. as required with fabrication work

Earthing with 50mm dia galvanised iron pipe 3.64mm thick x 3 mtrs. long and 1 x 4 SWG GI wire (1 mtr long) 13mm x 80mm dia GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection as to GS by TATA Medium GI pipe for soft soil.

Painting steel tubular pole including projected arm bracket with one coat of red oxide primer and two coats with silverlac AI, paint (Scraping where necessary). Pole painting upto 5 mtr. Pole

Supply and Fixing 12W & 1800 Lumens Stand Along LED Semi Integrated Solar Streetlight with arm suitable for 50-65mm dia pole and perfect solar system solution for remote & off grid locations as well as farmhouses, gardens and parks for roadway marking and community lighring. Housing in Aluminium Alloy body which makes it water & rust proof with IP65. PV module 50 Wp under STC with adjustable freme Battery minimum 12.8 V, 25 AH capacity Lithium Ferro Phosphate battery. System wattage should not be less than 12 W (+/- 5%), system lumen ef Light Source White Light Emitting Diode (W-LED) 20 Watt, W-LED luminaire, dispearsed beam, soothing to eyes with the use of proper optics and diffuser. LED Chip should be compliance to IES: LM-80 (Approved Method for Measuring Lumen maintenance of LED Light Sources and LED lumen depreciation time to L70. Test report for same should be submitted. The luminaire must use high efficiency W-LED with minimum 150 lumens per watt (and UV free). [A certificate to be submitted by the System supplier to the Test Lab during certification] Minimum 24 Lux when measured at a point 3 meters below the light. The illumination should be uniform without dark bands or abrupt variations and sothingto the eye. Higher light output will be preffered. Photometry and Color parameters as per IES LM-79:2008 or IS:16106: 2012 for following performance parameters like: 1) Total luminous flux: ³ 1800 lm. 2) Luminous efficacy (i.e. system efficasy): ³ 150 lm/W. 3) Color Temperature: Between 5500 K to 6500 K. 4) CRI ³ 70 5) Luminour intensity distribution should follow the batwing patterns in polar curves. 6) Require validation report using .ies file, which is generated during luminous intensity distribution test and using maintenance factor 0.9 and pole height of 4m., Road width 3m and Pole span 20m. The average illuminance level and uniformity should comply with requirement as per IS 1944, wherever applicable 7) The luminaire should be tested for all type tests as per IS 10322 Part 5 Sect 3 or IEC 60598-2-3 standards. Warrenty- The street lighting system (including the battery) will be warranted for a period of five years from the date of supply System Make: Havells/ Bajaj/ Wipro (Rate as per Quotation)

Supply & Fixing Information Sign Board 500 x 300 mm fabricated with MS Sheet 16 SWG and ISA frame 25 x 25 x 4 mm including painting and lettering with approved paint as per instruction of authority.

Addl. GST @ 18%

Addl. Labour Welfare Cess 1%