Zilla Parishad Tender

Brick work with 1st class bricks in cement mortar (1:6)

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (a) Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Supplying and laying Polythene Sheet (150gm / sq.m.) overdamp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. II. Other than SAIL/ TATA/RINL

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Supplying, Fitting & Fixing 30 mm thick Panel PVC Door Shutter consisting of outer frame made of 35 mm X 60mm thick Panel PVC . complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.

A) Iron door ring of approved quality fitted and fixed with nut and washer complete. (i) 50mm dia.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (ii) 75mm long x 10mm dia. bolt.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 15 mm

PVC Pipes (Dia) 25 mm

PVC Pipes (Dia) 32 mm

PVC Pipes (Dia) 100 mm

Supplying, fitting and fixing bib cock or stop cock. (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm

Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing). (i) 580 mm long

Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 (b) Porcelain of approved make.mm with

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long

Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (i) 25 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (iii) Nipple (150 mm long) (Dia) 25 mm

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (Other than SAIL/TATA/RINL)

Labour Charges for boring tubewell by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding others tools and plants as necessary and taking out them and lowering pipes strainers blind pipes etc. and fitting fixing the same Complete including bucket washing and other incidental works in the connection. (d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia i)100 mm. dia. Boring etc.

ii) 50 mm. dia.boring etc

Washing and developing tube well with air compressor pump and enginefor 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Suppling, Fitting and Fixing of a) 100 mm dia.(Housing pipe) uPVC rigid pipes conforming to ASTM-D- 1785 & Threaded to match with GI pipes as per IS:1239 (Part-I) or IS:554 (Each pipes 6 meter length) ( S-40 Light duty) of approved colour & wall thickness.

b) 50 mm dia (Well pipe) uPVC rigid pipes & conforming to ASTM-D- 1785 & Threaded to match with GI pipes as per IS:1239 (Part-I) or IS:554 (Each pipes 6 meter length) ( S-40 Light duty) of approved colour & wall thickness.

c) 50 mm dia. PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (2mtr. Long each)

d) uPVC Reducing Socket (100 mm X 50 mm)

e) 100 mm dia MS housing clamp with cap

f) Steel cutter upto 450 mm long with socket 50 mm dia

g) 1.5 HP V4 water filled submersible pump sets for 100 mm dia. Bore hole tubewell with 40 mm outlet size & other accessories. As per direction of EIC.

h) D.T. Starter of approved make (pannel board)

i) 1.50 sq.mm 3 core PVC Electrical cable of approved quality

j) 40 mm. dia. PVC column pipes with 6 Kg / Sq.Cm. (Working Pressure) & fittings (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I)

k) Solvant cement

l) 40 mm dia. PVC Elbow Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).

m) 40 mm dia. PVC Pipe Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).

Constrction of masonry platform 1.20m X 1.20m size with 50 mm th. cement concrete M-15 (1:2:4) over a layer of pick jhama B.F.S for platform and 125 mm X 75mm brick band on all side 12.5mm thick plaster (1:4) with net cement finish to the exposed surface etc. Complete as per dept drawing.

Supply of 3 copies colour photo (pre+ongoing+post) work & Display board (Marbel size 1'-0" X 1'-6") mentioning name of scheme,fund, year, implementing agency, expenditure detais in writing including fitting fixing complete at work site as per direction of Engineer in charge.

GST @12%

L;abour Cess @1%