Zilla Parishad Tender

Cement concrete with 30 mm down graded shingles excluding shuttering. In ground floor.a. 6:3:1 proportion.

Ordinary cement concrete ( mix 3:1.5:1) M-20 with graded stone chips (20mm down excluding shuttering and reinforcement,if any in groundfloor. b. River bazree.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction. for works in foundation,basement and upto roof of ground floor / upto 4.0m. i. Tor steel / Mild steel (TATA/SAIL/RINL)

Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor) 25 mm. to 30 mm. thick wooden shuttering as per decission & direction of E-I-C

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. 50 mm dia. boring etc.

100 mm dia. boring etc.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 50mm dia

(A) PVC Pipes 100mm dia

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.50 mm dia.

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.

Supply of long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a) 1000 litre capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing heavy type bell mouth reducing socket 50 mm X 100 mm

Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm. 50 mm

Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. 71 mm

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. 15 mm

Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel/oil bound prinmer of approved quality including smoothening surfaces by sand papering etc.On steel or other metal surface: Two coats (white in shade)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary. On steel or other metal surface: With super gloss (hi-gloss) Two coats (Except white in shade)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(SAIL/TATA/ RAIL)

Supplying fixing commissioning and testing Solar Voltaic Module 250 wp 40V on existing iron frame structure each 156 mm Monocrystalline Silicon Solar cells laminated between sheet of Ethyline Vinyl Acilate (EVA) and high transmissivily 3 mm tempered glass. Confirming to IEC 61215(Revised) specification or equivalent National of International Standards. The power output of the module under STC should be minimum of 250w. The operatlng voltage correspondlng to the power output mentioned above should be at least 57.0 Volts . The terminal box IP 65 Protection level on the module should have a provision for opening or replacing the module.(make-Waaree/ Andslite / Havells)

Supplying,Fitting Fixing & Installation of Iron Removing Filter Plant Capacity 1000 LPH IR Media Filter Working -Downilow Max Flow Rate -3m3/hr Working Pressure-1-3 kg/cm2 Size -13"X54" Make Pentair (BIS Standards & Including 1 Year Warranty)

Supply and fixing round 2-core 4 sq-mm PVC multi core FR wire for aray connecting.

Supply and fixing MC4 connector for panel loop.

Earthing with 50 mm (2") dia G.l. pipe 3.64 mm thick x3 mts. Long and 1 x4 SWG G.I. Wire (4 mts. Long) 13mm dia. X 80 mm long G. pipe protection (1 mtr, long) to be filed with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 ms. Below the ground level & restoring the surface duly rammed.

Connecting the all equipment to earth busbar inciudng GI (Hot Dip) wire of size as below on wall floor….. as required and making connecion to equipment with bolts, nuts, washers cable lugs as required and mending good damages No. 4 SWG.

Providing and fixing conductor made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supply, installation testing &lowering of 1 HP oil Solar submersible pump motor set complete having Suitable discharge as per yield test of well. Submersible cable of 30 mtr 3-core 2.5 sq-mm cable with MOC bar chart and necessary control panel and starter asper manufacturer specification.

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees esting etc. complete in all respect as per direction.

Add GST (CGST+SGST) 18.00%

Add Labour welfare cess 1.00%