Zilla Parishad Tender

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) p-109 , It 22

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) p-198 , it 5

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats SAME AS ITEM NO. 05 p-196, it 10

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.(iii) Two coats. P -197, it 15

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. p-200 , it 1(a)

(a)Painting with best quality synthetic enamel paint over a coat of primer of approved make and brand including smoothing surface by sand papering etc including using putty on the surfaces if necessary. [Super gloss(hi-gloss) with any shade except white] (Two Coat) P201 , It 2 ( b) ( iv)

(D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass/ board (prelaminated I particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary com-plete in all respect as per drawing and specifications and direction of the Engineer in charge The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etc. b) 101.50mm x 44.45 mm p -241 1(b)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6m height for external wall) (ii) 4 mm thick p -205 (1)(ii)

Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to IS: 1868- 1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISi embossed/certified make and brand as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodising Structural glazing /Curtain Wall ii) Sub frame for fixing Glass (Weight @0.31 Kg per Meter) p 248 , it 19

M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick ofsize 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction ofperpendicular to the intermediate channel of300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete) In ground floor, Page 165, Item No -17

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming tolS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining withjointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. (ii) 110 mm. Dia. p 213, it 21 A (ii)

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary.ramming, dressing the bed and fefilling the sides of the tanks with earth, r moving spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm.Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Partl.Payment will be made separetly on the basis of actual height based on relevantl.S.Code. (i) For 20 users A) With Pakur variety. (JSW JSPL / Shyam / SRMB/ /SSU BMASL / Electrosteel)el

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement cone (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia (JSW JSPL / Shyam I SRMB/ ISSU BMASL / Electrosteel)el

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS: 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads.fitting, fixing etc. complete in all respect including cost of all necessary fittings as required.jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes p 12 , it 19(i)(A) 32mm dia

(b) For Concealed Work (Dia) (B)25mm p 12, it 19b

( C ) 20mm p 12 , it 19 b

Supplying fitting fixing of sanitation & plumbing works D) (d) (i) Chromiumplated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similarbrand). PAGE 6

E) f) (ii) CP 2-way bib Cock • 15 mm, supplied, fitted and fixed. (Code No.5041 & Model· FLORENTINE of JAQUAR or similar brand). PAGE 45

F) (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical I Sumthing Special of ESSCO or similarbrand). P- 6

G) (i) (1) Chromium plated overhead Rain shower (Square), size- 180x180mm with revolving joint (Model Code No. F7010501 of CERA or equivalent) P-4

H) Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (b) With 'S' trap p -79, It 2(b)

I) Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (iv) Bestolite (solid type) white IT 10, P-81

J) Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size P.no. 41 It no 2 SOR Vol. ii

k )(c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube &fittings(Equivalent to Code No. ESH-5512 & Model - Tropical/ Sumthing Special of ESSCO or similar). P-4

L) (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). P- 4 (f)

M)Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm P-81 , It 15(ii)

N) Supplying, fitting and fixing 10 litre P.V.C. low-down cistc,rn conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.s. IT 2 , P-36

O) lb) Supplying 6 levers 'Godrej' Mortice Lock with keys including fitting & fixing complete.

P)i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. ii) Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type

Q) e) (ii) CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand). P-45 . IT 19

R) Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 2000 litre capacity

Add for Electrification work (work done estimate to be approved the authority and payment will be made as pwd schedule)

Submershible (1 HP)

Add for reading bench (work done estimate to be approved the authority and payment will be made as pwd schedule or By Quotation )( Bed , Matress , Bed sheet , pillow , Cartian , Table Chair)

Add CGST @9%

Add SGST @9%

Add Cess @1%

Add for Contingent upto 3%