Zilla Parishad Tender

supplying, fixing, commissioning and testing solor Photo Voltaic module 150Wp each 156mm Monocrystalline silicon solar cells laminated between sheet of Erhylene Vinyl Acetate (EVA) and high transmissivity 3mm tempered glass. Connforming to IEC 61215(revised) specifications or equivalent national or international standards. The power output of the module(s) under STC should be a minimum of 150W. The operating voltage corresponding to the power output mentioned above should be 16.4 V. The open circuit voltage of the PV modules under STC should be at least 21.0 Volts. The terminal box IP 65 protection level on the module should have a provision for opening for replacing module. (TATA BP Make)

supplying, fixing, commissioning and testing power conditioning consolodating unit consistion with PSU Switching Elements MOSFET type of charger PWM with MPPT technology input from PV 48 VDC to 120 VDC out put voltage sutable for 230V 1phase nomiunal battery bank current rating 100 ampere with system protections,short circuit ,deep discharge input surge voltage over current battery Dielestic strength 1.1 KV between input /out put and ground with EMI protections removed . Cooling forced with temperature sensitive fan operation ambinent temperature 50 degree celsius (Max) Operating mhumidity 85% maximum Assembly /mounting as per normal industrial practice finish epocy power costing cable entry from rear ,preferably 200mm above ground level input voltage (nom) VDC 96 V input voltage (Max 120 V control PWM carge controller rating KWp 2.5 KWp switching fDevice MOSFET/IGBT inverter continous 2.5 KVA out put rating KVA Charged controller & inverter will be housed inside a single housing ) input put put voltage VAC 230 V ,1 phs out put frequency 50HZ +/- 1 Hz out put voltage regulation +/- 2 % from no load to full load)

Supplying & fixing PVC arrey junction box dust and moisture proff IP65 96V ,20A with metal Oxide varistors surgev protector comprising to suitable size of copper connector for connecting 7 pair of 4 Sqmm cable approved make to be fixed of iron structure with MS clamp incl. painting etc as directed by EIC