Zilla Parishad Tender

Providing and laying Design Mix concrete for Plain / Reinforced Cement Concrete in any part of foundation of bridge /culvert with graded stone chips of appropriate nominal sizes , including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone , both of approved quality and cement , as necessary , cost of curing with water ,including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in charge , cost of quality control, sampling , testing etc all complete but excluding cost of formwork and reinforcement works. B). RCC grade M-20 with 22.4 mm size well graded river bazree using concrete mixer. i. For road

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ ply board/ steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. the rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. i) Where staging is required. i. For road

Earthwork in excavation from borrow pits (land owned/arranged by the Department) and depositing in layers of 250 mm.including breaking clods in embankment works and to fill up back of abutments, depressions and ruts with an initial lead up to 50 m and initial lift up to 1.5 m making bunds at top as directed dressing complete. (Borrow pit measurement). (i) In ordinary soil

Providing and fixing of Concrete sign boardas per MORD specification and drawing . Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embeded in cement concrete M15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level . The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides . Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and annexure 1700.1including cost of lighting, barricading, protection etc.

GST 18%

Cess 1%