Zilla Parishad Tender

(ITEM NO-B 1 (i) ,PAGE NO-23) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety]

(ITEM NO-(16) ,PAGE NO-16) 125 mm thick Brick work with 1st class bricks in cement mortar (1:4)

(ITEM NO-10 (iii) ,PAGE NO-26) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(iii) Rajmahal

(ITEM NO-36(a) & (f) ,PAGE NO-42) Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge. In ground floor.

(ITEM NO-40(a)(II) ,PAGE NO-44) Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (ii) Other than SAIL/ TATA/RINL

(ITEM NO-1(ii) (c) ,PAGE NO-189) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor ).

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.

(ITEM NO-13 (a) ii ,PAGE NO-104) M.S or W.I ornamental grill of approved design -----etc complete.

(ITEM NO-1 (d) i & ii ,PAGE NO-49) Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia (i) 50 mm dia. boring etc.

(ITEM NO-1 (d) i & ii ,PAGE NO-49) Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia (i) 100 mm dia. boring etc.

(ITEM NO-5 (ii) ,PAGE NO-52) Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (ii) 50 mm dia.

(ITEM NO-19(III) (A), PAGE NO-13) Supply of PVC pipes & fittings (medium duty ) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 50 mm dia medium quality. i)40 mm dia.medium quality

(ITEM NO-19(III) (A), PAGE NO-13) Supply of PVC pipes & fittings (medium duty ) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 50 mm dia medium quality. i)80 mm dia.medium quality

(ITEM NO-19(II), PAGE NO-13) Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. a) 32 mm dia.medium quality

(ITEM NO-19(III) (L), PAGE NO-18) Supplying ,fitting and fixing of Reducing Socket (80 mm X 40 mm)

(ITEM NO-9 (ii), PAGE NO-53) Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(ii) 40 mm dia.

(ITEM NO-19(I) (a) , PAGE NO-12) Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground i) 32 mm dia.medium quality

(ITEM NO-19(I) (a) , PAGE NO-12) Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground i) 20 mm dia.medium quality

Supplying, fitting & fixing and installation of 1.0 HP Sub-Mersible pump with motor of 100 mm dia of approved make and brand(CG/KSB / Kirloker) with panel box cable and necessary fittings. (Non Schedule Item)

(ITEM NO-24, PAGE NO-55) Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete

(ITEM NO-20, PAGE NO-55) Washing and developing tubewell with air compressor pump and engine for 8 hours contineous pumping per day with necessary arrangements for testing the yield in gallons per hour with V notch including hire and labour charges for all tools and plants and scafolding as required complete in all respect.

(ITEM NO-11(iv) , PAGE NO-53) Supplying fitting and fixing check valve ( vertical )G.M. tested to 21 kg per sq.cm 32 mm dia

(ITEM NO-5 (viii), PAGE NO-5) Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only)

(ITEM NO-7(f) (i) , PAGE NO-7) Supplying, fitting and fixing bib cock or stop cock. (g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cockof approved brand and make,spray painted and tested to 21kg per sq. cm.(i) 15 mm

Supplying fitting fixing PVC insulated flexible three core flat cables of area 2.5 sqmm as per standard and bunched Type A of IS 5831/1984 & Sheathing to IS 8130/1984 for higher flexibility are used to connect underwater as per ST I type os IS 5831/1984. (Non Schedule Item)

(ITEM NO-4 , PAGE NO-89) Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cementplastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(SAIL/TATA/RINL)

Supply fixing,fitting of 1000 litter water tank(Sintex or any other branded)

Eectrification connection work with one main switch, Switch board and light etc. fan out side light etc

Fixing Fitting work site parmanent display board

GST, CESS and Contingency

GST

CESS

Contingency