Zilla Parishad Tender

Prime Coat : Providing and applying primer coat with Catonic Bitumen Emulsion of approved grade conforming to IS:8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road &Bridge Works of MoRT&H (5th Rivision) (P-248,It.No.-5.01.) (i) For WBM / WMM Surface : (with primer @ 0.70-1.0 kg/m2)

Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS:8887-1978 on the prepared surface cleaned with Hydraulic broom,moistening the surface including cost and carriage of emulsion,hire charges of machinery and labour,cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Rivision). (P-248,It.No.-5.02) (i) On Bituminous Surface. (Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg per sqm.)

Providing,laying,and rolling of Open-graded premix surfaceing of 20 mm thickness composed of 13.2 mm (@0.018 m3 per m2) and 11.2 mm(@0.009 m3 per m2 )size stone aggregates,including thoroughly cleaning of the surface,screening,cleaning and pre-heating stonechips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion,carrying the mixture by tipper trucks or by any other suitable arrangements,laying the mixture uniformly over the surface including line,grade and level operations as and when required for proper line,grade and level to serve as wearing course on a previously prepared base,including mixing in Mobile Hot Mix Plant(Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity,finished to required level and grades including the cost and carriage of stone chips and matrix,heating the matrix,preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant(Light Duty) and other machinary,pay of operators,cost of fuel and lubricants etc. complete to be followed by seal coat of either Type Aor Type B as per Technical Specification Clause 518 for Rural Roads of MORD. (P-254,It.No.-5.11.) Ultimate Useable Rate attained to……………..

Seal Coat : B . Providing and laying PrimixSeal Coat (Type B) with approved quality sand/grit @ 0.6m3/100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat,including heating and mixing cleaned sand /grit (100 % passing through 12.36 mm sieve and retained on 180micron sieve) uniformly with bitumen binder,laying and spreading the mix at an uniform rate using suitable means ,brushing the surface ,if necessary, to ensure uniformity,followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder andaggregates, all other incidental charges,cost of fuel and lubricants,including hire charges of machinaries, tools & plants required for construction and quality control complete as per clause 511 of Specifications for Road & Bridge Works of MoRT&H (5 th Revision). (P-255,It.No.-5.13) Ultimate Useable Rate attained to………

**Adding item of works for display board/ follock etc. as to be required and cost of photographs of the works as required .....for THE WORKS………......

ADD for G.S.T (Goods and Service taxes) @ 18.00 % (50% WB GST. & 50% CENTRAL GST.) over the above total [ Marked as- A. ] asper the rules of The Govt. of India…

ADD for LABOUR WELL FARE CESS @ 1.00 % Over Sl 1 to 8