Zilla Parishad Tender

100 mm dia

Supplying high dencity polythene Strainer of approved make with adapter conforming to IS Specification 40 mm dia

Supplying fitting fixing steel cutter piece 450 mm long with socket 40 mm dia

Supply & installation of 1.5 HP Submersible Pump ( KSB / Kirloker / Cromton/ Greeves etc ) including jointing of cables to each connectpecial pipe including through PVC flexible pipe including hiring charges of tools ( excluding the cost of cable and PVC pipe) 50 mm head including Panel box

Supplying fitting fixing PVC insulated flexible three core flat cables of area 2.5 sqmm as per standard and bunched Type A of IS 5831/1984 & Sheathing to IS 8130/1984 for higher flexibility are used to connect underwater as per ST I type os IS 5831/1984

Supplying fitting and fixing single phasing VOLTAGE SENSING PREVENTER & AUTO START UNIT submersible pump control panel ( 1/2 HP to 2.0 HP ) OF L & T brand of an influential electronic circuit which keeps three stage worked electrical machine from single stage cut off, stage succession inversion and lopsided voltage

Supplying fitting and fixing G.I. cap at top 100 mm dia

Supplying fitting and fixing check valve ( vertical )G.M. tested to 21 kg per sq.cm 40 mm dia

Supply of PVC Pipes and fittings ( medium duty ) conforming to ASTMD 1785 and threaded to match with G.I. pipes as per IS -1239 ( part-1) Reducing socket ( 80 mm X 40 mm )

Washing and developing tubewell with air compressor pump and engine for 8 hours contineous pumping per day with necessary arrangements for testing the yield in gallons per hour with V notch including hire and labour charges for all tools and plants and scafolding as required complete in all respect

Packing the annular space between the outside the of the tube well pipes and strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm…. Etc complete

Supplying fitting and fixing PVC Pipes of approved make ( medium duty) conforming to ASTMD 1785 and threaded to match with G.I. pipes as per IS -1239 ( part-1) with all necessary accessories, specials viz socket, bend,tee,union,cross, elbow, nipple,longscrew, reducing socket, reducing tee, short piece etc fitted with holder bats clamps including cutting pipes making thread fitting fixing etc complete in all respect including cost of necessary fittings as required jointing materials and two coats of painting with approved paint in any position above ground ( payment willbe made on the centre line measurement of total pipe line including all specials. no seperate payment will be made for accessories, specials. payment for painting will be made seperately. a) 15 mm dia

b) 20 mm dia

Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kgper sqm9 For water line only 20 mm dia

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity

(g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cockof approved brand and make,spray painted and tested to 21kg per sq. cm. 15 mm dia

Earth work in Excavation in foundation trenches of drain in all sorts of soil… complete (a) Depth of Excavation not exceeding 1.5 m

Earthwork in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. a) with earth obtained from excavation of foundation.

Single brick flat soiling of picked Jhama Bricks including ramming and dressing bed to proper level and filling joits with powdered earth & soil sand.

Cement concrete with graded stone chips ballast ( 40mm ) down size excluding shuttering in all floor. i) 1:3:6 proportion.

Ordinary Cement conrete (mix 1: 1.5 : 3) with graded stone chips (20mm size) excluding shuttering and re-inforcement If any, Rajmahal varieties.

Hire charges for shuttering with centering and necessary stagging upto 4m … complete (a) 25mm to 30 mm wooden shuttering.

Re-inforcement for RCC works in all sorts of structures including intersection, complete as per drawing and direction . ( TOR Steel or Mild Steel)

Brick work of 1st Class brick with cement morter (1 : 6 ) (a) In foundation and plinth.

125 mm thick Brick work with 1st class brick in Cement Mortar (4:1).

Plaster of wall, floor etc with sand and cement morter (1 : 4) including rounding off or champhering corners as directed. (a) With 3 : 1 cement morter. (i) 10mm thick plaster.

Plaster of wall, floor etc with sand and cement morter (1 : 4) including rounding off or champhering corners as directed. (a) With 6 : 1 cement morter. (i) 15mm thick plaster.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc A) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) (B) Light Colour

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (iii) Two coats.

Supplying, fitting & fixing ofDisplay Board

GST

Cess