Youth Services And Sports Department Tender

SOFA SET LOBBY (3+2) CLASSIC DESIGNED SOFA COMPRISING OF 1 PC. 3 SEATER & 1PC. OF 2 SEATER.STRUCTURE OF SOFA IS MADE OF SOLID HARD TEAK WOOD AND THE BASE OF SEAT AND BACKREST WEBBED WITH NYLON BELT AND ZIG-ZAG SPRING FIXED WITH PAPER COATED WIRES. THE FOAM USED IN HI-QUALITY HI RESILENT POLYURETHANE FOAM OF AT LEAST 40 DENSITY. THE ARMS HAVE SPECIALLY DEISGNED HAVING A IN-BUILT MAGAZINE RACK AND HAS A STRIPED DESIGN ON BOTH THE ARMS. HAND REST COMPLETE WITH FIRST QUALITY TEAK WOOD AND UPHOSTERED COMBINED DESIGN CONTINUE UNDER ARMREST , SEAT TO ARMREST.THE BACK REST OF THE SOFA IS ERGONIMICALLY DESIGNED IN SLANTING CURVE IN WHICH THICNESS IS RANGING FROM 100 MM FROM SEAT TO TOP 75 MM & CUSHION IS GIVEN FOR EXTRA COMFORT. THE BACK REST IS MADE WITH HI DENSITY AND HI RESLIENT PU FOAM AND RECRON FIBER POLYFUILL FOR SUPERIOR COMFORT. THE SET IS UPLHOSTETED USING HI-GRADE LEATHERITE OR WATER REPELLANT FABRIX AS PER DIRECTIOSN OF THE OFFICE IN-CHARGE . ARMREST IN WIDTH OF 200 MM IS COMFORATABLE AND FINSIHED WITH SAME MATERIAL.ALL PANELS MADE OF BWR GRADE PLY WITH 1 MM APPROVED "COLOUR" LAMINATE .ALL EXPOSED EDGES SEALED WITH PVC EDGE BANDING. POLISH.ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE 3 SEATER 1900 X 830 X 800 MM MM 2 SEATER 1250 X 830 X 800 MM .

RECEPTION TABLE MANUFACTURING, SUPPLYING & INSTALLATION OF CONTEMPORARY DESIGNED RECEPTION TABLE IN SIZE OF L 2400 IS MADE OUT OF 25 MM THICK BWR GRADE PLYWOOD AS TOP AND GABLE ENDS, MODESTY PANEL, DRAWERS ETC. MADE OUT OF 18 MM THICK BWR GRADE PLYWOOD. DESIGN OF MODESTY PANEL IS IN BI-COLOR LAMINATE MADE OF 18 MM THICK IN HEIGHT OF 1050 MM . FIRST PANEL FROM MAIN TOP IS IN EQUAL LENGTH OF TOP WITH HEIGHT OF 1050 MM FROM FLOOR. THIS PNAEL IS LAMINATED IN DARK COLOR 1 MM LAMINATE AND THEN SECOND PANEL OF LIGHT COLOR LAMINATED FIXED ON MIDDLE OF FIRST PANEL LEAVING 600MM LENGTHWISE FROM BOTH SIDES. THE UNIT SHALL CONSIST OF 2 SETS OF 3 DRAWERS EACH WITH COMPLETE LOCKING ARRANGEMENT.ALL MADE OF BWR GRADE PLY WITH 1 MM APPROVED "COLOUR" LAMINATE .ALL EXPOSED EDGES SEALED WITH PVC EDGE BANDING. POLISH.ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE. ALL ACCESSORIES WILL BE OF APPROVED QUALITY. DRAWERS SHALL BE COMPLETE WITH SOFT CLOSING TELESCOPIC CHANNEL, SS HANDLE AND LOCKING ARRANGEMENTS. OVERALL SIZE 2400 X 600 X 1050 MM

RECEPTION BACK PANELLING PROVIDING BACK PANELLING FOR RECEPTION FRAMING WITH BACK LIT LED PROVISION. THE TOP SURGACE IN LAINATE AND PRIVISION FOR PROVIDING BRADING OPTIONS.ALL MADE OF BWR GRADE PLY WITH 1 MM APPROVED "COLOUR" LAMINATE .ALL EXPOSED EDGES SEALED WITH PVC EDGE BANDING. POLISH.ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICER-IN-CHARGE

KING SIZE BED - VIP MANUFACTURING & SUPPLYING OF ROYAL AND ELEGANT DESIGNED USING FIRST QUALITY SOLID SEASONED TEAK WOOD BED AND TEAK VENEER. DESIGN OF BED IS ACCOMPLISHED WITH TWO MAIN CARVING POST , MAIN DESIGN IS HEADING FROM TWO CARVING COLUMN TOPPED WITH DOUBLE SMALL AND MEDIUM SIZE FLUTED DESIGN. FROM TWO COLOUMN, LEAVING SPACE OF 75 MM DESIGN CONTINUED TO MAKE HEADBAORD 'S STRUCTURE WITH 50 MM WIDTH * 36 MM THICK RECTANGLE STRUCTURE . AFTER RECTANGLE STRUCTURE HEADBOARD IS DESIGNED WITH MESH OF SPLIT OF NATURAL CANES STRETCHED IN CRISS-CROSS DESIGN FROM ALL EDGES OF STRUCTURE. MATTRESS PANEL DESIGNED WITH RECTANGLE DESIGNED PANEL ON THREE SIDES AND MAIN MATTRESS RESTING PANEL FIXED 1" DEEP FROM TOP EDGES OF SIDE PANELS. FULL BED STANDING ON SOLID TEAK WOOD DEISGNED IN A TAPERED FINISH WITH ENGRAVED DESIGN * 4 PCS. LEGS. MAIN COLOUMN POST AND LEGS ARE MADE OF FIRST QUALITY SOLID TEAK WOOD AND FINISHED ODOUR FREE POLYURETHANE WOOD POLISH. 50MM WIDTH RECTANGLE PANEL IN HEAD BOARD'S MADE FROM 18 MM + 18MM THICK PLY SANDWICHED & FINISHED COMPLETE. MATTRESS REST ON 19MM THICK PLY WHICH WILL BE SUPPORTED BY SOLID WOOD STRUCTURE FIXED ON ALL AROUND THE INSIDE OF BED.SIDE PANEL WILL BE FIXED ON HEAD-BOARD & LEG-BOARD BY METAL JOINTS . ALL PANELS MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES, WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH, NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT. THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE .SIZE 1890 X 2060 X 1000 (HEADBOARD) MM

SINGLE BED - VIP MANUFACTURING & SUPPLYING OF ROYAL AND ELEGANT DESIGNED FIRST QUALITY SEASONED SOLID TEAK WOOD BED AND TEAK VENEER. DESIGN OF BED IS ACCOMPLISHED WITH TWO MAIN CARVING POST, MAIN DESIGN IS HEADING FROM TWO CARVING COLOMN TOPPED WITH DOUBLE SMALL AND MEDIUM SIZE FLUTED DESIGN. FROM TWO COLOUMN, LEAVING SPACE OF 75 MM DESIGN CONTINUED TO MAKE HEADBAORD 'S STRUCTURE WITH 50 MM WIDTH * 36 MM THICK RECTANGLE STRUCTURE . AFTER RECTANGLE STRUCTURE HEADBOARD IS DESIGNED WITH MESH OF SPLIT OF NATURAL CANES STRETCHED IN CRISS-CROSS DESIGN FROM ALL EDGES OF STRUCTURE. MATTRESS PANEL DESIGNED WITH RECTANGLE DESIGNED PANEL ON THREE SIDES AND MAIN MATTRESS RESTING PANEL FIXED 1" DEEP FROM TOP EDGES OF SIDE PANELS. FULL BED STANDING ON SOLID TEAK WOOD DEISGNED IN A TAPERED FINISH WITH ENGRAVED DESIGN * 4 PCS. LEGS. MAIN COLOUMN POST AND LEGS ARE MADE OF FIRST QUALITY SOLID TEAK WOOD AND FINISHED ODOUR FREE POLYURETHANE WOOD POLISH. 50MM WIDTH RECTANGLE PANEL IN HEAD BOARD'S MADE FROM 18 MM + 18MM THICK PLY SANDWICHED & FINISHED COMPLETE. MATTRESS REST ON 19MM THICK PLY WHICH WILL BE SUPPORTED BY SOLID WOOD STRUCTURE FIXED ON ALL AROUND THE INSIDE OF BED.SIDE PANEL WILL BE FIXED ON HEAD-BOARD & LEG-BOARD BY METAL JOINTS . ALL PANELS MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT. SIZE 960 X 2060 X 1000 (HEADBOARD) MM

BED SIDE TABLE - VIP MANUFACTURING & SUPPLYING OF ROYAL AND ELEGANT DESIGNED FIRST QUALITY SEASONED SOLID TEAK WOOD AND TEAK VENEER BED SIDE TABLE. DESIGN REFERRED FROM BED. IT'S RICH DESIGN OFFER TWO COMPARTMENT STORAGES. TOP COMPARTMENT IS OPEN SHELF AND 2ND COMPARTMENT IS DRAWER. DRAWER'S FASCIA IS DESIGNED WITH MESH OF SPLIT OF CANES STRETCHED IN CRISS-CROSS DESIGN FROM ALL EDGES OF STRUCTURE . TOP MADE OF 25 MM THICK , REST RIGHT, LEFT , BACK AND BOTTOM SIDES OF CABINET IS MADE OF 18 MM. FULL BED SIDE TABLE STANDING ON SOLID TEAK WOOD DEISGNED IN A TAPERED FINISH WITH ENGRAVED DESIGN * 4 PCS.ALL PANELS MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE SIZE 450 X400 X450 MM

LUGGAGE RACK - VIP MANUFACTURING & SUPPLYING OF ROYAL AND ELEGANT DESIGNED FIRST QUALITY SEASONED SOLID TEAK WOOD AND TEAK VENEER LUGGAGE STORAGE RACK. DESIGN REFERRED FROM BED. IT'S RICH DESIGN OFFER TWO COMPARTMENT STORAGES. TOP COMPARTMENT IS OPEN SHELF WITH FIRST GRADE SS -303 METAL RUNNERS AND 2ND COMPARTMENT IS SHELF AT THE BOTTOM OF THE RACK. THE BACK OF THE RACK HAS A PLANEL DESIGNED WITH MESH OF SPLIT OF CANES STRETCHED IN CRISS-CROSS DESIGN FROM ALL EDGES OF STRUCTURE . TOP MADE OF 25 MM THICK , REST RIGHT, LEFT , BACK AND BOTTOM SIDES OF CABINET IS MADE OF 18 MM AND TEAK WOOD STRUCTURE WHERE ALL PANELS MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE SIZE 750MM X 400MM X 800MM

2 DOOR WARDROBE - VIP MANUFACTURING AND SUPPLYING OF ROYAL AND ELEGANT DESIGNED TWO DOOR WARDROBE DESIGNED REFERRED TO BED DESIGN. WARDROBE IS COMPRISING OF CLOTHERS HANGING AREA WITH TWO SHELVES FROM BOTTOM. THE WARDOBE ALSO HAS A DRAWER UNIT FOR STORAGE OF ESSENTIAL ITEMS WITH HI-QUALITY SOFT CLOSE TELESCOPIC CHANNELS.THE TWO SHUTTERS MADE OF PLYWOOD FINISHED WITH LAMINATE AS PER SPECIFICATION. REST INSIDE SHUTTERS FASCIA IS DESIGNED WITH MESH OF SPLIT OF CANES STRETCHED IN CRISS-CROSS DESIGN FROM ALL EDGES OF STRUCTURE . THE CANE IS FIXED USING A FIRST CLASS SOLID WOOD BEADING WITH POISH FINISH. ALL PANELS MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE 800 X 600 X2100 MM

T.V. & STUDY UNIT - VIP MANUFACTURING AND SUPPLYING OF ROYAL & ELEGANT DESIGNED T.V. & STUDY UNIT IN LENGTH OF 2400 MM. TWO SUPPORTING GABLE ENDS MADE FROM 50 MM WIDTH * 25 MM THICK RECTANGLE STRUCTURE . AFTER RECTANGLE STRUCTURE REST IS DESIGNED WITH MESH OF SPLIT OF CANES STRETCHED IN CRISS-CROSS DESIGN FROM ALL EDGES OF STRUCTURE. THE CANE STRUCTURE IS FIXED WITH BEADING OF FIRST CLASS TEAK WOOD WITH POLISH. THE STUDY COME TV UNIT HAS A STRUCTURE OF MINIMU THICK 75MM ON ALL SIDES WITH STORAGE FACITLY.THE UNIT. THE UNIT HAS RELEVANT PVC BUFFERS OF TOP GRADE FOR LEVELLING OF THE UNIT..ALL PANELS MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE L 2400 X D 500 X H 750 MM

STUDY CHAIR - VIP STUDY CHAIR MADE OF FIRST GRADE SOLID TEAK WOOD STRUCTURE . BACK IS CUSHIONED WITH MESH OF CANE AND SEAT IS MADE OF PLY UPHOSLTERED WITH HD FOAM AND LEATHERITE UPHOLSTERY. BACK IS SHAPED IN ERGONOMIC STYLE FOR COMFORATBLE BACK SUPPORT. ALL WOODEN LEGS AND STRUCTURE OF SEASONED TEAK WOOD AND FINISHED WITH ODOUR FREE POLYURETHANE WOOD POLISH.ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE 800 X 600 X2100 MM

MIRROR - VIP SUPPLY OF GOOD QUALITY WALL MOUNTED MIRROR PANEL WITH PLAY PANEL PASTED AND FIRST CLASS SOLID WOOD WITH A TRAY.6MM THICK MIRROR WILL FIXED ON 12MM PLY WITH CP FINISHED 25MM DIA METAL STUDS (4PCS.).HEIGHT OF MIRROR PANEL WILL BE 1200 MM.TRAY IN SIZE OF W 600 X D 200 .TRAY WILL BE 19 + 19 MM SANDWICHED PLY .ALL MADE OF BWR GRADE PLY WITH 1 MM APPROVED "COLOUR" LAMINATE .ALL EXPOSED EDGES SEALED WITH PVC EDGE BANDING. POLISH.ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF THE UNIT TO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE : W 600 X H 750MM MIRROR WITH EDGE POLISHED.

COFFE TABLE SET COFFEE CHAIR MADE USING FIRST CLASS SOLID TEAK WOOD FRAME UPHOSTERED WITH HI-DENSITY HI-RESILIENCE POLYURENTHANE 40 DENSITY FOAM. COVERED WITH TEXTURED LEATHERETTE/FABRIC FINISH COVER BOTH FOR SEAT AND BACK REST AND WITH ODOUR FREE POLYURETHANE WOOD POLISH FINISH ON VISIBLE SURFACES. THE DESIGN FOLLOWS A SMART CURVATURE AND HAS 'S' DESIGN ON THE SIDE ARM. THE BACK IS CUSHIONED WITH HI DENSITY AND HI RESILENT POLYURETHANE FOAM AND UPHOLSTERED WITH SUPERIOR QUALITY CHANEL FABRIC . THE COFFEE TABLE IS MADE OF FIRST GRADE SOLID TEAK WOOD WITH A SOLID WOOD TOP COVERED WITH FIRST QUALITY TEAK VENEER. THE BASE OF TABLE IS TURNED WITH A SMARK TURNING DESIGN WITH 4 DESIGNER LEGS. THE COFFEE TABLE DIAMETER IS 500MM AND ITS DESING COMPLIMETS THE DESIGN OF THE SOFA CHAIR. THE ERGONMICS OF THE SOFA CHAIR TO BE SUPERIOR QUALITY WITH ADEQUATE COMFORT.POLISH.ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF UNITTO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE SOFA CHAIR 620 X 500 X 750 MM.OVERALL TABLE SIZE 600 MM DIA X 600 MM

SOFA SET (VIP UNIT) ROYAL & RICH DESIGNED SOFA COMPRISING OF 1 PC. 3 SEATER + 2 PC. OF SINGLE SEATER. STRUCTURE OF SOFA IS MADE OF SOLID HARD TEAK WOOD AND THE BASE OF SEAT AND BACKREST WEBBED WITH NYLON BELT AND ZIG-ZAG SPRING FIXED WITH PAPER COATED WIRES. THE FOAM USED IN HI-QUALITY HI RESILENT POLYURETHANE FOAM OF AT LEAST 40 DENSITY. THE ARMS HAVE SPECIALLY DEISGNED CURVED HAND REST COMPLETE WITH FIRST QUALITY TEAK WOOD AND UPHOSTERED COMBINED DESIGN CONTINUE UNDER ARMREST , SEAT TO ARMREST. .THE BACK REST OF THE SOFA IS ERGONIMICALLY DESIGNED IN SLANTING CURVE IN WHICH THICNESS IS RANGING FROM 120 MM FROM SEAT TO TOP 50 MM & CUSHION IS GIVEN FOR EXTRA COMFORT. THE BACK REST IS MADE WITH HI DENSITY AND HI RESLIENT PU FOAM AND RECRON FIBER POLYFUILL FOR SUPERIOR COMFORT. THE SET IS UPLHOSTETED USING HI-GRADE LEATHER . ARMREST IN WIDTH OF 200 MM IS COMFORATABLE AND FINSIHED WITH SAME MATERIAL. . OVERALL SIZE 3 SEATER 2050 X 850 X 920 MM & SINGLE SEATER 1060 X 850 X 920 MM.

CENTRE TABLE – VIP/LOBBY CENTRE TABLE OF FIRST GRADE SOLID WOOD TOP AND COVERED WITH 8 MM FINISH GLASS TOP FIR WITH METAL STRUTS UV GLUED TO THE BASED USING UV GLUE ADHESIVE & BASE STRUCTURE MADE OF 4 LEGS.EACH LEG IN SIZE OF 60X60 MM SQUARE WITH CURVED LEGS.THEN EACH LEG TO LEG WILL BE COVERED BY 18 MM THICK RUNNING PLY. .ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF UNITTO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE OVERALL SIZE 1050 X 900 X400MM

CORNER TABLE – VIP/LOBBY CENTRE TABLE OF FIRST GRADE SOLID WOOD TOP AND COVERED WITH 8 MM FINISH GLASS TOP FIR WITH METAL STRUTS UV GLUED TO THE BASED USING UV GLUE ADHESIVE & BASE STRUCTURE MADE OF 4 LEGS.EACH LEG IN SIZE OF 60X60 MM SQUARE WITH CURVED LEGS.THEN EACH LEG TO LEG WILL BE COVERED BY 18 MM THICK RUNNING PLY. .ALL PANELS IF ANY MADE OF B.W.R GRADE PLYWOOD- CONFORMING IS. 710-1977 CHEMICALLY TREATED FOR TERMITE AND BORER RESISTANT BONDED WITH ODOUR FREE POLYURETHANE WOOD FORTIFIED PHENOL FORMALDEHYDE SYNTHETIC ADHESIVE CONFIRMING TO IS 848-1974 OF APPROVED MAKE AND BRAND. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF UNITTO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE OVERALL SIZE 500 X 500 X400MM

DINING TABLE WITH 4 CHAIRS DINING TABLE - MANUFACTURING AND SUPPLYING DINING TABLE WITH TEAK WOOD LEGS (40 * 40 MM SECTIONS) & TOP WITH 19 MM THICK BWR BLOCKBOARD CONFORMING . THE DINING TABLE IS ROUND IN NATURE AND HAS A DEISGN OF THE BASE WHICH HAS LEGS IN ORDER. THE TABLE TOP IF OF ORIGINAL ITALIAN MARBLE WITH MIRROR POLISH FINISH AND DULY FULLY ROUNDED ON ALL EDGES. THE TABLE BASE HAS A LOAD CAPACITY TO CARRY AT LEAST 200 KGS AND THE TOP COMES WITH A ROTATOR UNIT ALSO FININSHED WITH ITALIAN MARBLE. THE TABLE COMES WITH A SET OF FOUR CHAIRS WITH SS INTERNAL STRUCTURE AND MOULDED HI DEINSITY AND HI RESILENCE MOULDED FOAM SEATING CONFIRMING TO IS SPECIFICATIONS. THE CHAIR IS FINSHED WITH QUILTED ARTIFICAL LEATHERITE AND IS ERGONOMICALLY DESIGNED TO SUIT DNING PURPOSE. ALL JOINTS TO BE FINISHED BY USE OF AUTOMATED MORTISER AND TENONING MACHINES. ALL BALANCE SURFACES OF UNITTO BE FINISHED WITH LAMINATE OF THICKNESS - 1 mm CONFORMING TO B.S. 476 . ALL PLY BOARDS PANELS WILL BE PRE-PRESSED IN THE FACTORY ON BOTH SIDE BY LAMIINATES OF THICKNESS 1mm ON THE EXTERIOR FACE & 1MM ON THE INTERIOR SURFACE. IT IS GLUED BY SPRAY & PRE -PRESSED IN HOT PRESS. NO MANUAL PROCESS OF GLUEING IS INVOLVED. ALL THE PLY WOOD SURFACES , WHETHER INTERNAL OR EXTERNAL SHOULD BE COVERED WITH LAMINATES. THIS GIVES A CLEAN FINISH , NO BUBBLE AND NO UNDULATION ON THE SURFACE.. THE ENTIRE PRODUCT SHOULD BE MODULAR IN NATURE AND NO HAND CARPENTRY WORK SHOULD BE THERE. ALL THE CUTTING SHOULD BE DONE ON PRECISE LASER RIP SAWS AND PLANING ON AUTOMATED PLANAR MACHINE. THE EDGE BANDING TO BE DONE ON AUTOMATED THROUGH FEED HOT MELT GLUE MACHINE TO ENSURE SUPERIOR FINISH. THE SPRAY POLISH (ODOUR FREE POLYURETHANE WOOD COATING) TO BE DONE IN A CONTROLLED PRESSURISED PAINT BOOTH DUST FREE ENVIRONMENT.THE PRODUCT DESIGN AND SPECIFICATION AS SPECIFIED BY THE OFICEER-IN-CHARGE OVERALL SIZE OVERALL TOP SIZE 1300MM DIA X 20 MM THICKNESS FIXED ON BASE. ANOTHER 700 MM DIA MARBLE TOP FIXED ON REVOLVING PVC RING ON MAIN MARBLE TOP.