West Bengal Transport Infrastructure Development Corporation Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal Transport Infrastructure Development Corporation Limited - WBTIDC Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date12 Dec 2024
Closing Date3 Jan 2025
Tender Amount₹ 1,58,87,576
Costs
EMD
₹ 3,17,752Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WBTID_782313_1Bid Award Id
ViewTender No
18/WBTIDC/SE/2024-25Tender Authority
West Bengal Transport Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://wbtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.
330.63
77
25637.05
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. Do By Fine sand
125.54
640
80453.56
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
212.78
324
68940.72
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
212.78
24
5106.72
... More
Cement concrete with graded stone ballast (40 mm size excluding shuttering) 1:3:6
24.93
4830
120411.9
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. Ground Floor
15.96
4963
79209.48
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. First Floor
5.5
5058
27819
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works 25 mm to 30 mm shuttering without staging in foundation
434.05
205
88980.25
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work Ground floor
1191.78
363
432616.14
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work First floor
632.15
381
240849.15
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture]
M 20 Grade. Pakur Variety Ground Floor
107
5649
604443
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled
concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
M 25 Grade, Pakur Variety Ground Floor
138
5989
826482
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled
concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]
M 25 Grade, Pakur Variety First Floor
67.88
6084
412981.92
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Ground Floor
31.06
60433
1876973.44
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. First Floor
6.93
60913
422127.09
... More
Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth
58.09
5081
295155.29
... More
Brick work with 1st class bricks in cement mortar (1:6) (a) In Superstructure Ground Floor
103.75
5035
522381.25
... More
Brick work with 1st class bricks in cement mortar (1:6) (a) In Superstructure First Floor
128.5
5146
661261
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) Ground Floor
437.16
664
290274.24
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) First Floor
25.2
676
17035.2
... More
Extra for using approved H.B netting in every third layer in item 19 , above in any floor
75.18
41
3082.38
... More
Labour for Chipping of concrete surface before taking up Plastering work.
999.29
21
20985.09
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:6 cement mortar (a) 20 mm thick plaster Ground Floor
1357.18
155
210362.9
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:6 cement mortar (a) 20 mm thick plaster First Floor
192.05
159
30535.95
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:4 cement mortar (a) 15 mm thick plaster Ground Floor
563.87
152
85708.24
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:4 cement mortar (a) 15 mm thick plaster First Floor
601.73
156
93869.88
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:4 cement mortar (a) 10 mm thick plaster Ground Floor
289
123
35547
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:4 cement mortar (a) 10 mm thick plaster First Floor
272.5
127
34607.5
... More
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.Area of each Granite slab above 1.00 Square meter. Ground Floor Stair
26.96
3002
80933.92
... More
Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.Area of each Granite slab above 1.00 Square meter. First Floor
23.87
3014
71944.18
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor (Area of each tile above 0.09 Sq.m) (i) Coloured decorative Ground Floor
15.15
897
13589.55
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor (Area of each tile above 0.09 Sq.m) (i) Coloured decorative First Floor
30.3
902
27330.6
... More
Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge. Ground Floor wall
53.97
1060
57208.2
... More
Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge. First Floor wall
133.14
1072
142726.08
... More
Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density 940 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor
free from moisture ( 8%), grease etc. complete in all respect
with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer )shall have to be added separately, wherever required. (Note: This work should not be executed without specificpermission of Superintending Engineer). ln Ground FIoor: Category: High Footfall ; Class- 23;Abrasion resistance:-AC4 Thk on Swelling:- 15% ;Impact resistance:- IC 2 Ground Floor
61.55
1275
78476.25
... More
Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density 940 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor
free from moisture ( 8%), grease etc. complete in all respect
with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer )shall have to be added separately, wherever required. (Note: This work should not be executed without specificpermission of Superintending Engineer). ln Ground FIoor: Category: High Footfall ; Class- 23;Abrasion resistance:-AC4 Thk on Swelling:- 15% ;Impact resistance:- IC 2 First Floor
161.12
1287
207361.44
... More
Supplying Laminate Floor Accessories (Skirting, End edge, Tmoulding,Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture ( 8%), grease etc. complete in all respect as per direction & satisfaction of Engineer in charge. Cost of labour charge for fitting & fixing of Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer )shall have to be added separately, wherever required. (Note: This work should not be executed without specific permission of Superintending Engineer). Ground Floor
64.4
301
19384.4
... More
Supplying Laminate Floor Accessories (Skirting, End edge, Tmoulding,Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture ( 8%), grease etc. complete in all respect as per direction & satisfaction of Engineer in charge. Cost of labour charge for fitting & fixing of Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer )shall have to be added separately, wherever required. (Note: This work should not be executed without specific permission of Superintending Engineer). First Floor
170.7
313
53429.1
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) size not Iess than 600mmX 600 mm X 9.5mm thick Ground Floor
144.94
1472
213351.68
... More
Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) size not Iess than 600mmX 600 mm X 9.5mm thick First Floor
8.45
1484
12539.8
... More
Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. Slab Thickness above 25 mm and upto 37.5 mm
9.76
713
6958.88
... More
Providing waterproofing treatment over concrete roof surface (old or new) by the application of two coats of slurry prepared with latex of approved brand, water and cement in the proportion of (LP.W Cement - 1:4:6) by volume, with brush in a time gap of minimum 4hrs to 14hrs between the two layer, laying 20mm thick and sand and cement consolidated plaster (1:4) admixed with Plastrocrete Super of approved brand 0.2% by weight of cement laying of clay burnt pots in inverted manner over the mortar keeping a gap of 10-20 mm between two pots, filling the vertical joints with the aforesaid mortar, providing a layer of 40mm thick screed concrete admixed with Plastocrete Super and Recron fibre over the pot layer, the top surface of the treatment should be chequered to provide the antistrip property.
334.45
751
251171.95
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Ground Floor wall
3.86
9888
38167.68
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. First Floor wall
4.67
9986
46638.73
... More
Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38 mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.
16.38
4330
70925.4
... More
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film
664.29
448
297601.92
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. Ground Floor
0.37
134799
49875.63
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. First Floor
0.41
134999
55349.59
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf) Ground Floor wall
22.68
2659
60306.12
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf) First Floor wall
13
2674
34762
... More
Extra over item No. 37 for providing:
(a) Vision aperture (round or retangular in shape) with 7.4kg. Per sq.m./ 3mm thick glass pane with wooden beads. (Cost of glass panes and wooden beads will be paid separately).
6
33
198
... More
Supplying wooden moulding slanting beat of size 37mm X18mm (finished) of approved design to finish the joint between wooden frame of door/window with masonary in true line and level fitted & fixed with adhesive and head less pins complete as per direction of Engineer -in-charge. Teak wood beat
194.4
109
21189.6
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40mm X 6mm, 200mm Length
114
25
2850
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40mm X 6mm, 125mm Length
88
20
1760
... More
Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Godrej Hydraulic door closer fitted and fixed complete. Heavy type
14
2064
28896
... More
Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm fluted.
38
100
3800
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark 100mm. X 50mm. X 1.25mm.
51
43
2193
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark 50mm. X 37mm. X 1.50mm.
27
17
459
... More
Supplying 'Godrej' mortice lock chromium plated with keys 6levers including fitting & fixing complete
19
1954
37126
... More
Door stopper.(Brass)
19
117
2223
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. [4 mm thick]
56
536
30016
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; (A) clear, toughened glass conforming to IS: 2553-1992 (part-II) 10mm thick
74.97
1863
139669.11
... More
Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. 3 /4 track sliding window.
56
941
52696
... More
C) Fully glazed single/double leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket.[The rate includes the hire charge of all tools and plants, adhesive, joineries but excludes the cost of extruded aluminium sections, glass, panel boards EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt etc.]
7.56
1501
11347.56
... More
Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to IS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per
direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodising Structural glazing /Curtain Wall i) Mulion & Transom (Weight @1.819 Kg per Meter)
153
463
70839
... More
Supplying profiles of required section made of Aluminium Alloy Extrusion conforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming to IS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per
direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodising Structural glazing /Curtain Wall ii) Sub frame for fixing Glass (Weight @0.31 Kg per Meter)
153
81
12393
... More
Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge for Structural Glazing/Curtain wall etc. Glazing Silicon for fixing Glass on Sub frame
153
112
17136
... More
Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work
153
57
8721
... More
Supplying profiles of required sections made of aluminium alloy extrusion confirming to IS 732-1983 and IS 1285-1975 anodised with required film thickness and specified colour / natural mat finished conforming to IS 1868-1983 for fabrication of structural glazing, curtain wall formed of basic section of any ISI embossed / certified make and brand as per direction of Engineer-in-Charge. (Payement will be made on finished length of the work). for Structural glazing / curtain wall with 15 micron Coloured Anodising (i) Fixing Plate (Wt. @ 0.515 Kg per Mtr.)
153
116
17748
... More
Supplying profiles of required sections made of aluminium alloy extrusion confirming to IS 732-1983 and IS 1285-1975 anodised with required film thickness and specified colour / natural mat finished conforming to IS 1868-1983 for fabrication of structural glazing, curtain wall formed of basic section of any ISI embossed / certified make and brand as per direction of Engineer-in-Charge. (Payement will be made on finished length of the work). for Structural glazing / curtain wall with 15 micron Coloured Anodising (ii) Fixing cap (Wt. @ 0.342 Kg per Mtr.)
153
77
11781
... More
Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:- Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium
sections, glass, glazed silicon, weather silicon etc.)
67.41
850
57298.5
... More
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (i) 66mm x 90mm
38.48
497
19124.56
... More
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. (i) 32 mm thick
14.51
2763
40091.13
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
77.85
29
2257.65
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. [On steel or other metal surface] With super gloss (hi-gloss), Two coats (with any shade except white)
77.85
79
6150.15
... More
Priming one coat on timber surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
76.61
38
2911.18
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On timber surface With super gloss (hi-gloss), Two coats (with any shade except white)
76.61
81
6205.41
... More
Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5 mm thick) [NB: No extra payment will be made for lift & lead etc.] Ground Floor
798.9
122
97465.8
... More
Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5 mm thick) [NB: No extra payment will be made for lift & lead etc.] First Floor
741.09
122
90412.98
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. [Two coats] Solvent based interior grade Acrylic Primer Ground Floor
798.9
48
38746.65
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. [Two coats] Solvent based interior grade Acrylic Primer Ground Floor First Floor
741.09
49
36469.04
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality
1539.99
70
107799.3
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. [Two Coats] Ground Floor
1357.18
45
61208.82
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. [Two Coats] First Floor
192.05
45
8797.81
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. [Two Coats] Super Protective 100% Acrylic Emulsion. Ground Floor
1357.18
97
131646.46
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. [Two Coats] Super Protective 100% Acrylic Emulsion. First Floor
192.05
97
18765.21
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)
25.38
9077
230374.26
... More
Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work)
36
471
16956
... More
M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having wo flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I.intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of onnecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.
complete) Ground floor
61.55
1159
71336.45
... More
M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having wo flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I.intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of onnecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.
complete) First floor
90.9
1173
106625.7
... More
Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.)
283
408
115464
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. For structural members of specified sections weighing less than 22.5 Kg./m
3.09
72603
224343.27
... More
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.
The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.
3.5
74900
262150
... More
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)
50
1991
99550
... More
Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. (III) 75 mm. x 75 mm. x 8 g.
485.1
335
162508.5
... More
Labour for fitting wove wire or similar fencing net tightening and fixing the same to post with staples at every bar (including the cost of cutting and lapping joints in the net, the cost of staples, binding wire etc. and of labour for fixing such staples as necessary). (b) Net above 1350 mm. height
231
12
2869.02
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:
45
250
11250
... More
Granular Sub-base with Graded Material
(Table:- 400-1) By Mix in Place Method :
Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Grading -VI
87.5
2745
240187.5
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 320 Kg of cement with super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture]
M 30 Grade, Pakur Variety Ground Floor
87.5
6169
539787.5
... More
Providing and fixing at or near ground level precast cement concrete in kerbs (size: 450 mm x 350 mm x width 150 mm at bottom with bevelled nosing at top) of cement concreat M20 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in- Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.
75
625
46875
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all pecials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work (PVC Pipes) i) 25 mm dia.
110
177
19470
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS:1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all pecials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work (PVC Pipes) ii) 32 mm dia.
25
236
5900
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). i) 25 mm dia.
8
778
6224
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). ii) 32 mm dia.
3
1160
3480
... More
Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm. i) 32 mm
3
687
2061
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 1) 2000 litre capacity
2
10434
20868
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 2) 1000 litre capacity
1
5128
5128
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. i) 450 mm long
18
82
1476
... More
Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.
(Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Concealed Work a) 15 mm
50
137
6850
... More
Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.
(Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Concealed Work b) 20 mm
90
158
14220
... More
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii)600 mm X 450 mm
11
484
5324
... More
Supplying, fitting and fixing Waste fittings complete. i) Polythene 32 mm dia
11
44
484
... More
Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.) (This item to be executed on specific permission of Superintending
Engineer)
12
3988
47856
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm
12
2869
34428
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar
cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including
mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
11
2208
24288
... More
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
11
1497
16467
... More
Supplying, fitting and fixing concealed cistern of approved make with flash plate Cute/Loop/Shell/Nova (Code No. concealo-H(80mm Body sap code 508179 of Hindware or equivalent).
Matt/Gloss
11
7440
81840
... More
Supplying, fitting and fixing bib cock or stop cock. (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
20
815
16300
... More
Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (25 mm dia. and 600 mm long)
11
430
4730
... More
Supplying, fitting & fixing of liquid soap container. (a) Cromium plated.
11
393
4323
... More
Supplying, fitting & fixing Aluminium domical grating. i) 125 mm
20
56
1120
... More
Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model -Tropical / Sumthing Special of ESSCO or similar brand)
12
659
7908
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. i) 600 mm long
12
107
1284
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 1050 mm long
70
91
6370
... More
Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
12
1251
15012
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (160mm).
60
546
32760
... More
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials. a) Under ground (160mm dia)
252.15
93
23449.95
... More
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials
4
11101
44404
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4: 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. i) 100 users
2
107444
214888
... More
Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. (a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre).
100
1014
101400
... More
Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. (a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia. Next 50 metre
100
883
88300
... More
Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. (a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia. (b) For depth upto 250 metre for 150 mm dia. Tube well with top enlargement of 250 mm dia.(upto 50 metre).
100
1066
106600
... More
Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. 50 mm dia.
80
367
29360
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239
(Part - I). a) 80 mm dia
200
578
115600
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239
(Part - I). b) 150 mm dia
100
1420
142000
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239
(Part - I). Reducing Socket (mm X mm) - 150 X 80
2
455
910
... More
Supplying, fixing of G.I pipe 150 mm (as centre guide) of approved quality for 100 mm dia MS bore pipe complete in all respect.
2
1295
2590
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). Threaded End Cap 150 mm
2
302
604
... More
Washing and developing well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
4
7538
30152
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.
4
2029
8116
... More
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.
5
8247
41235
... More
Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. 75 mm dia.
1
403
403
... More
Supplying, installing, testing, commissioning of SS submersible pump(75mm) each pump shall have 5 HP capacity with coupling, coupling guard & all necessary fittings. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary cables, ancillaries, valves, header (G.I. Tata Heavy) suitable control panel, high & low level controller & accessories including base plate complete as required.
2
40000
80000
... More
Supplying, installation, testing and commissioning of wall/floor mounting self supported compartmentalized cubical type panel including necessary angle/flat iron frame including cable alley, separate compartment for each incoming & outgoing switch including nut, bolt, washer, necessary welding, driling, grinding, tapping etc. as required and painting the panel board by powder coated paint and inter-connection of all the components by suitable size copper cable/ copper strip including supply and fixing the following accessories as per instruction of EIC INCOMER : A) 415V 400A. TPN Main Switch (L&T/Siemens)- 1 no. B) 415V 400A. C/O Switch (L&T/Siemens)- 1 no. BUSBAR CHAMBER : 500 Volt grade 4 bar 600 Amp. Capacity tinned copper busbar chamber OUTGOING : A) 415 V 160Amp. TPN Main Switch (L&T/Siemens)- 2 nos. B) 415 V 63 Amp. TPN Main Switch (L&T/Siemens)- 2 nos. C) 415 V 63 Amp. TPN Main Switch (L&T/Siemens)- 2 nos. INSTRUMENTS : A) 0-500 V Volt Meter (AE Make)- 1 no. B) Volt Selector Switch (Kayce Make)- 1 no. C) 0-400A Ammeter (AE Make)- 1 no. D) Amp. Meter Selector Switch (Kayce Make)- 1 no. E) 400/5 Amp. CT (Kappa) - 3 nos. F) LED type indicating lamp - 3 nos. G) HRC Fuse - 3 nos.
1
167684
167684
... More
Supplying and fixing 240/415 V change over (MCB
module) of on din rail of existing DBs/ enclosure
and necessary connection. 320A
1
22660
22660
... More
Supplying and fixing 415V, TPN SFU with sheet
steel enclosure on angle iron frame on wall
with nuts bolts etc incl. S & F 3 nos. DIN type HRC
fuse as per rating 200A
1
10712
10712
... More
Supplying and fixing 415V, TPN SFU with sheet
steel enclosure on angle iron frame on wall
with nuts bolts etc incl. S & F 3 nos. DIN type HRC
fuse as per rating 100A
2
6512
13025.38
... More
Supplying and fixing Sheet steel Main Switches on
angle iron frame on wall 415 V TPN with fuse on L&N, 63 A
5
3675
18375.2
... More
Supplying and fixing Sheet steel Main Switches on
flat iron frame on wall 240 V DP with fuse on L&N, 32 A
8
1315
10522.48
... More
Supplying and fixing 240/415 V MCB of Breaking
capacity 10kA & C characteristics on din rail of
existing DBs and necessary connection 6-32A DP
18
562
10122.84
... More
Supplying and fixing 240/415 V MCB of Breaking
capacity 10kA & C characteristics on din rail of
existing DBs and necessary connection 6-32A SP (Make - Legrand)
60
195
11742
... More
Supplying of Following 1.1 KV Grade XLPE/PVC insulated armoured Al. Conductor cable of IS 1554(Part-I) :-4 Core x 50.00 Sq. Mm 1.1 KV Grade XLPE insulated armoured Al. Conductor Cable.
50
367
18354.5
... More
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc.
50
163
8188.5
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 4 core upto 50 sqmm
6
202
1217.46
... More
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+18 way
6
2202
13212.84
... More
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+8 way
8
1521
12170.48
... More
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+4 way
12
1221
14658.96
... More
Supply of 240 Volt grade 300 mm sweep AC Wall fan including all accessories(Brand approved by EIC)
12
1642
19714.2
... More
Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length
12
94
1137.12
... More
Supply of 240 Volt grade 1200 mm sweep AC ceiling fan including all accessories(Brand approved by EIC)
18
2549
45886.5
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
18
67
1223.64
... More
Supply and fixing 22 watt LED MASTER tube lamp (Brand approved by EIC)
80
396
31724
... More
Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.
80
88
7086.4
... More
Supply of 240 volt grade 300 mm sweep AC Exhaust fan (Modular type) complete with all required accessories (Brand approved by EIC)
6
3857
23147.22
... More
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")
6
338
2033.22
... More
Supply and fixing of 8 Channel NVR482108HS -S2, 4 SATAHDD, 4K resolution etc. complete for Camera
1
26059
26059
... More
Supply and installation of 2 TB server hard drive with Synchronous Transfer Rate 249 MBPS rotational speed - 7200 RPM, Temperature range 5 degree to 60 degree centegrade, Interface - Serial Attached SCSI complete
2
6650
13300
... More
TV set Smart TV(2) Actual Screen Size (inches) 55 LED (Light Emitting Diode) for camera view, Ethernet Port, 55" LED Display with HDMI Port for Site
1
46302
46302
... More
Installation of 4MP IP bullet motorse zoom camera DH-HFW1420SP-0360B with focal length 3.6 m, effective Pixels 2688(H) x 1520(V) operating temperature range (-) 30 degree centegrade to (+) 60 degree centegrade etc complete
8
9517
76137.6
... More
8 Port POE+ Switch minimum 2 Port should support 30W with screen size 6.7 inches, voltage 48 volt, wattage 60.2 watt etc complete in all respect
1
9064
9064
... More
Supply and installation of CAT -6 cable including TAI finishing, Fire retardant PVC (FRPVC), High performance network, High speed LAN and Broad band internet etc. complete
560
57
31920
... More
supply and laying power cable (3 core) finishing with TAI, HDPE insulation bar copper conduetor, PVC Jacketed etc complete
120
85
10200
... More
Installation of Camera networking system along with Wi-Fi, LAN & all necessary connection etc. complete
1
10842
10842.81
... More
Manufacturing, supply and installation of 7.5 metre G.I. Swaged type street light pole Hot Dipped galvanized with nut, bolts, with square base plate, in house terminal arrangement with cover for loop-in and loop-out excluding construction of RCC foundation. Height 7.5 M
6
12746
76477.5
... More
Supply and installation of UPS for Camera with capacity 1 KVA + 360W, voltage range 140-300VAC, AC voltage regulation 10%, Transfer timee - Typical 4-8 m/s, Typical recharge time 4-6 hours upto 90% capacity, humidity 0-90% RH @ 0-40 degree centegrade (non condencing) etc. complete in all respect
1
33990
33990
... More
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
1860
66
124527
... More
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
180
143
25770.6
... More
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC
240
97
23484
... More
Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works 25x10mm Size
870
36
31363.5
... More
Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 15 A plug point/exhaust fan point)
72
166
12013.92
... More
Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and necessary conection
18
931
16760.16
... More
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
12
551
6612.6
... More
Supply & Fixing 240 V 6 A Piano key type switch (Brand
approved by EIC) on existing sheet metal switch board
having bakelite/perspex top cover by screws after making
housing for switch by cutting bakelite/perspex cover and
making necessary connections as required.
110
27
3059.1
... More
Supply & Fixing 240 V, 6A plug socket (Brand approved
by EIC), without switch & plug top, on existing sheet
metal switch board with bakelite/perspex top cover by
screws after making housing for plug by cutting
bakelite/perspex top cover and making necy. connections
with PVC wire and earth continuity wire etc.
50
37
1854
... More
Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
20
75
1503.8
... More
Supply & Fixing 240 V, 20 A plug socket (Brand
approved by EIC), without plug top and switch, on
existing sheet metal switch board with bakelite/perspex
top cover by screws after making housing for combined
plug switch by cutting bakelite/perspex top cover and
making necy. connections with PVC wire and earth
continuity wire etc.
20
75
1503.8
... More
Manufacturing, supply and installation of 7.5 metre G.I. Swaged type street light pole Hot Dipped galvanized with nut, bolts, and double straight arm of maximum 1.5 metre in length, with square base plate, in house terminal arrangement with cover for loop-in and loop-out excluding construction of RCC foundation. Height 7.5 M
4
13958
55834.24
... More
Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly (a) Upto 9.0 mtr. Size 0.6 x 0.6 x 1.70 mts
10
2920
29200.5
... More
Supply and installation of Feeder Pillar box of size 600 mm x 600 mm x 300 mm made of 4 mm thick CRCA steel sheet or 2.5 mm GI sheet (ISI marked) steel sheet outdoor type with top canopy, sides having louvers for ventilation, weather proof epoxy painted & extra locking arrangement as per direction of Engineer-in-Charge. (Consisting of following items in the Feeder Pillar) :- i) Incomer - 01 no: 415 V, 100 Amp, 4 pole EL MCCB. ii) Earth leakage Relay with separate core balance current transformer : Sensitivity : 30 mA to 3A, Time delay: 0 - 5 sec., iii) DP 240 volt 40 Amp air break AC coil contactor - 1 no. iv) 230 volt 24 hours time switch - 1 no. v) 5-10 Amp SP MCB - 4 no. "C" cerve of 10 ka vi) Digital Voltmeter - 1 set with C.T. vii) Digital Ammeter - 1 set with C.T. viii) LED Indication lights Installation of the feeder to be done by earth cutting, brick soling and cement concrete foundation as required & sand filling, ramming and muffing around the feeder pillar box by brick and cement morter work as per direction of Engineer-in-Charge.
1
35410
35410.19
... More
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole: i) One coat of red lead/Zinc chromate priming ii) 1st coat of synthetic enamel paint over the primer iii) 2nd coat of synthetic enamel paint over the 1st coat.
10
497
4974.9
... More
Painting Block Letters or Digits within a circle/square as required,with Black Japan paint of approved make & brand, the size of letters and digits as given below
Size 50mm and upto 75mm
10
13
136.9
... More
Energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver. Lamp Type- 120 Watt LED, Colour Temp (CCT):- 5700 ANSI, Nominal Voltage:- 240 V, Mains Current:- 0.360 Amp, Power Factor:- = 0.95, Optics:- Asymmetric, System Luminous Efficiency (Lm/W):- = 90 (Brand
16
9630
154088
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground
level as below:By TATA-Medium GI Pipe
20
1569
31394.4
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. (a) Solid GI Wire No. 4 SWG
45
18
842.4
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
5
160
803.4
... More
Supplying of Following 1.1 KV Grade XLPE/PVC insulated armoured Al. Conductor cable of IS 1554(Part-I) :- 4 Core x 16.00 Sq. Mm 1.1 KV Grade XLPE insulated armoured Al. Conductor Cable.
240
154
36981.6
... More
Supply and delivery of 5 star 2 TR Capacity concealed type split Air Conditioner of rated cooling capacity of 24000 BTU/hr with 1 no. twin rotary compressor, 1 no. IDU of rated power supply - 230 V 1 Ph-50 Hz, 1 no. ODU of rated power supply - 230 V 1 Ph-50 Hz, Air flow/IDU :- 800 CFM.
3
53239
159719.01
... More
Erection and commissioning charges for 2 TR Air conditioner Machine
3
3625
10876.8
... More
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
3
807
2422.56
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements