West Bengal State Rural Development Agency Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Rural Development Agency - WBSRDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date31 Dec 2018
Closing Date30 Jan 2019
Tender AmountRefer Documents
Costs
EMD
₹ 11,34,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Wb20rrnmu02
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_WBSRD_71971_1Bid Award Id
ViewTender No
27/(ADB-RCIP 1-TRANCHE-3)/2018 , 1st CallTender Authority
West Bengal State Rural Development Agency ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
TECHNICAL SPECIFICATION AND DRAWINGS
QUALIFICATION INFORMATION FORMS
BOQ Items
Supplying and driving 150mm Sal-bullah /Eucalyptus bullah piles 300c/c as per required depth by monkey in sorts of Soil and 1000c/c Horizontal Bracing including hoisting, half lap joints/splicing (lap length at least 90 cm long with 3 nos. of collars made of 50 cm. x 6 mm. M.S. Flat, clamps, bolts and nuts and washers and placing piles in position), Coal tarring on wooden surfaces including cost of materials (Double coat), protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. direction & satisfaction of the Engineer-in-charges
150
-
100
Supplying, Fitting & fixing on Salbullah pilling Tar bitumen drum sheet walling with proper lapping including supplying, cutting and straightening drums and carrying them to site and fitting, fixing them with country nails with washers to the salwood frames complete including the supply of all materials (excluding the cost of frames), carriage and cost of labour complete to site as per direction of the Engineer-in-charge. (Measurement will be made as per finished area).
144
-
100
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
350
-
100
Earthwork in filling, in compound, tank, lowland, ditches, etc. with good earth in layers not exceeding 150 mm including breaking clods and consolidating the same by ramming and dressing completely. With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
1230
-
10
TOTAL BILL 1
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 1.07 SAME AS TOTAL AMOUNT OF BILL 1
1
-
-
Admin Building
-
-
-
Dismantiling all types of masonry excepting cement concrete plain or reinforcement stacking serviceable materilas at site & removing rubbish as directed within a lead of 75m. In ground floor including roof.
7.5
-
10
Dismantiling all types of masonry excepting cement concrete plain or reinforcement stacking serviceable materilas at site & removing rubbish as directed within a lead of 75m. 1st Floor
7.5
-
10
Dismantiling all types of masonry excepting cement concrete plain or reinforcement stacking serviceable materilas at site & removing rubbish as directed within a lead of 75m. 2nd Floor
7.5
-
10
Dismantiling all types of plain cement concrete work, stacking serviceable materials at site & removing rubbish as directed within a lead of 75m. upto 150mm thick. Ground floor
7.5
-
10
Dismantiling all types of plain cement concrete work, stacking serviceable materials at site & removing rubbish as directed within a lead of 75m. upto 150mm thick. 1st floor
7.5
-
10
Dismantiling all types of plain cement concrete work, stacking serviceable materials at site & removing rubbish as directed within a lead of 75m. upto 150mm thick. 2nd floor
7.5
-
10
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor including roof.
7.5
-
10
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. 1st floor
7.5
-
10
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. 2nd floor
7.5
-
10
Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin- Charge prior to execution will be necessary).
100
-
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
626.97
-
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
49.86
-
10
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
208.99
-
10
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
304.3
-
10
Supplying & Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
121.38
-
10
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact
with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). Depth upto 1.5 m.
130.68
-
10
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
325
-
10
b)Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
507.17
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
-
-
-
Ground Floor
2047.31
-
10
1st Floor
893.66
-
10
2nd Floor
1201.44
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.25mmto 30 mm shuttering without staging in foundation,all floor, roof & above.
-
-
-
Ground Floor
688.83
-
10
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
207.12
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
-
-
-
Ground Floor
51.71
-
10
1st Floor
19.89
-
10
2nd Floor
23.71
-
10
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. foundation, basement all floor, Roof & above
-
-
-
Ground Floor
101.75
-
10
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.
-
-
-
Ground Floor
313.38
-
10
1st Floor
120.55
-
10
2nd Floor
143.71
-
10
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
-
-
-
Ground Floor
13.02
-
10
1st Floor
15.8
-
10
2nd Floor
25.43
-
10
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
610.56
-
10
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
112.23
-
10
25mm thk Damp Proof Course with cement concrete (1:1.5:3) (with graded stone aggregate 10mm normal size) & painting the top suface with a coat of bitumen [ VG 40] using 1.7kg. Per Sqm. Including heating the bitumen & cost & carriage of all materials complete. [ Bitumen to be supplied by the Agency]. Foundation, basement all floor, Roof & above
22
-
10
250 mm th. Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I, having drying Shrinkage less than 0.05% conforming to IS: 2185 (Part-3)-1984 made up of fly ash (conforming to IS: 3812-1981, with permissible loss on ignition upto 6% ), lime , cement and laid in Cement Mortar (1:6) complete in all respect as per direction & satisfaction of Engineer -in Charge
-
-
-
Ground Floor
72.95
-
10
1st Floor
82.63
-
10
2nd Floor
97.64
-
10
125 mm thick Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I,having drying Shrinkage less than 0.05% conforming to IS: 2185 ( Part-3)-1984 made up of fly ash (conforming to IS: 3812-1981, with permissible loss on ignition upto 6%), lime , cement and complete in all
respect as per direction & satisfaction of Engineer -in Charge. laid in Cement Mortar (1:6) -In Super Structure
-
-
-
Ground Floor
335.64
-
10
1st Floor
328.5
-
10
2nd Floor
353.5
-
10
100 mm thick Autoclave aerated concrete block Work with size 625 mm x 250 mm x 100 mm- Grade-I, having drying Shrinkage less than 0.05% conforming to IS: 2185 (Part-3)-1984 made up of fly ash (conforming to IS:
3812-1981, with permissible loss on ignition upto 6%), lime , cement and laid in Cement Mortar (1:6) complete in all respect as per direction & satisfaction of Engineer-in-Charge . laid in Cement Mortar (1:6) -In Super Structure
-
-
-
Ground Floor
40.32
-
10
1st Floor
44.52
-
10
2nd Floor
60.9
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
-
-
-
Ground Floor
426.88
-
10
1st Floor
408.93
-
10
2nd Floor
493.13
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
-
-
-
Ground Floor
1299.17
-
10
1st Floor
1109.58
-
10
2nd Floor
954.33
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
-
-
-
Ground Floor
489.93
-
10
1st Floor
434.62
-
10
2nd Floor
354.91
-
10
Providing, mixing and laying protection for plaster work admixed with surface active plasticising agents, polymers & additives. (conforming IS 2645 2003 & IS: 9103-2000) at 200 ml per bag of cement all in complete. all floor, Roof & above.
3127
-
10
Supplying, Drilling/Cleaning hole and injecting Hilti make ETA Approved HIT-RE 500 chemical with the help of Hilti HIT-HDM 330/500 dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consulatnt and in accordance with EOTA-TR-023“guidelines for post installed rebar connections” for approval. all floor, Roof & above.
-
-
-
a) 8 mm Dia - depth 200mm
10
-
10
b) 10mm Dia - depth 100mm
10
-
10
c) 12mm Dia - depth 180mm
10
-
10
d) 16mm Dia - depth 240 mm
10
-
10
e) 20mm Dia - depth 300mm
10
-
10
f) 25mm Dia - depth 375mm
5
-
10
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, Stair, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. all floor, Roof & above.
203.71
-
10
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622- 2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength 1200 N. all floor, Roof & above.
57.4
-
10
Supplying , fitting & fixing 1st quality Ceramic tiles in walls to match with the existing work & 4 nos. of key stones (10 mm.)fixed with araldite at back of each tiles & finishing the joints with the white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface ,if necessary or by synthetic adhesive & grout materials etc. (Anti skid) with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm. & joint filling using white cement slurry @0.20kg./Sqm. Area of each tile above 0.09sqm. colour decorative. all floor, Roof & above.
510.1
-
10
Neat Cement punning about 1.5mm thick in wall dado, window sills floor, drain Note: cement 0.152cum. Per 100sqm in any floors. Roof & above.
418.3
-
10
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Other Local Wood. Any floors. Roof & above.
-
-
-
Ground Floor
1.03
-
10
1st Floor
1.01
-
10
2nd Floor
1.01
-
10
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 25mm thick shutters (single leaf).any floors. Roof & above.
95.92
-
10
Supplying fitting & fixing fiber reinforcement polymer(FRP) composite door shutters as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. any floors. Roof & above. 25mm thick
44
-
10
Supplying fitting & fixing fiber reinforcement polymer(FRP) composite door frame as per approved design with glass fiber reinforcement plastic moulded skins & a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science & Technology(DST) to satisfy IS:4020 door testing performance criteria. 66mm x 70mm. Any floors. Roof & above.
108
-
10
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
216
-
10
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy
weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
144
-
10
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
36
-
10
Anodised aluminium grip handle with base plate of approved quality fitted & fixed completed.With base plate. 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Any floors. Roof & above.
72
-
10
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
72
-
10
Anodised aluminium barrel / tower / socket bolt (full covered) of approved
manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: . 100mm long x10mm dia bolt. Any floors. Roof & above.
36
-
10
Anodised aluminium barrel/ Tower/ Socket bolt/sliding Hasp bolt ( Full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted& fixed with cadmium plate serews. 300mm long x10mm dia bolt. Any floors. Roof & above.
36
-
10
Anodised aluminium decorative handle (hexagonal/ftuled) of approed quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. Any floors. Roof & above.
78
-
10
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
33
-
10
Godrej Hydraulic door closer fitted and fixed complete. Heavy type. Any floors. Roof & above.
33
-
10
Suppling,providing & fixing vision panel not exceeding 0.1 sqm in all type of flush doors Rectangular or square. Any floors. Roof & above.
8.25
-
10
Providing, fitting and fixing in position glazed casement/ 2trake or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float / smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
1119.96
-
10
Supplying, fitting & fixing two pointed nose aluminium handle including fitting & fixing. any floors. Roof & above.
112
-
10
Supplying, fitting & fixing Aluminium peg stay 300mm long including fitting fixings
112
-
10
Suplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
4183.2
-
10
Supplying fitting & fixing Collapsible gate with 40mm x 40mm x 6mm tee as top & bottom guide rail, 200x10mmx2mm vertical channels 100 mm apart in fully stretched position 20mmx5mm M.S. flats as collapsible bracings properly rivetted & washered including 38mm steel rollers including locking arrangements fitted & fixed in position with lugs set in cement concrete & including cutting necessary holes chasing etc. in walls floors etc & making good damages complete etc. any floors. Roof & above.
4.2
-
10
Supplying fitting & fixing M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 16 Kg./sq.mtr and above. any floors. Roof & above.
1.44
-
10
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900 mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed / Matt finish, complete as per direction of the Engineer-in-charge. Weight of Stainless Steel railing per metre 6.5 Kg (approx). any floors. Roof & above.
21.6
-
10
Supplying, fitting and fixing Priming one coat of timber or plastered surface with synthetic oil bound primer of approved quality including surface by sand papering etc. any floors. Roof & above.
116.6
-
10
Supplying, fitting and fixing Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
154.32
-
10
Supplying, applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
493.13
-
10
Supplying & Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly
(plastered or concrete surface) as per manufacturer's specification. Two coats
493.13
-
10
Supplying and applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.
1309.24
-
10
Supplying, applying and rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
1309.24
-
10
Supplying & Applying Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats
1309.24
-
10
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface :With super gloss (hi-gloss) -Two coats (with any shade except white)
116.6
-
10
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shad). any floors. Roof & above.
154.32
-
10
Supplying & Applying protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. any floors, roof & above.
50
-
10
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
200.88
-
10
Supplying and laying true to line and level 25 mm. thick precast roof tiles made of cement conc. With stone chips as per approved strength and density set in 25 mm.(Avg) thick cement morter (1:3) & filling up joint (3mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg. per Sqm. back of tiles & then setting close the precast tiles, finishing up the joints with slurry already laid & finally finishing the top surface including providing 150mm high skirting with the top surfac including providing 150mm high skirting with the same tiles flushed with the inside surface of parapet wall finishinbg the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer- in- charge.(levelling if necessary maybe paid separately).For 25mm thick precast tiles (cement 14.6kg./Sqm. Underlayer). any floors, roof & above.
463.25
-
10
Supplying & applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required). any floors, roof & above.
463.25
-
10
Supplying & laying Polymer concrete made with water resistant bonding agent of synthetic rubber emulsion as per manufacturer's specification including the cost of cement concrete (2.75 Kg / bag of cement) Note : Payment on volume of (1 : 1½ : 3) Concrete. any floors, roof & above.
46.33
-
10
Supplying & provide chicken mesh in joints of R.C.C. & brickwork before plastering.All floor and above roof.
168.35
-
10
TOTAL BILL 2
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 3.19 SAME AS TOTAL AMOUNT OF BILL 2
1
-
-
Furniture Works
-
-
-
Supply and installation window blind Brand: Lenbitz or equavalent Material: Polyester Colour: Beige Dimensions(In Inches): Sizes : Length- 44 x Width- 48, Length- 72 x Width- 44, Length- 96 x Width- 44, Length- 60 x Width- 44, Length- 84 x Width- 44 Set Size: 1 piece Set Content: 1 Pc Sku:FU1407151-S-PM12222
14.4
-
10
Supplying and installation of table with central drawer, both sides drawer at site, size: 1665 mm x 900 mm table top x 725 mm height, with 2 nos. drawer unit (each unit combine with 3 nos drawer and locking system). Made: particle board/Plywood structure with combination of wooden laminate/pu finish. (Make: Godrej. Model no. Table S-1070 or equivalent. Locking system: Godrej or equivalent.)
3
-
10
Supplying and installation of all wood table with am open shelf and CPU storage on the RHS and a three drawer unit on the LHS with a central keyboard tray, size: 1200 mm x 600 mm table top x 750 mm height. Made: particle board/Plywood structure with combination of wooden laminate/pu finish. (Make: Godrej. Model no. STYLO or equivalent. Locking system: Godrej or equivalent.)
16
-
10
Supplying and installation of all wood table with URU attached Pedestal, size: 2100 mm x 2250 mm table top x 750 mm height. Made: particle board/Plywood structure with combination of wooden laminate/pu finish. (Make: Godrej. Model no. Aristo or equivalent. Locking system: Godrej or equivalent.)
1
-
10
Supply and installation of 14 seater conference table, Modular type with membrane top and nickel chrome plated squeze leg U/s and option of wooden / perfo metal modesty panels walnut shade, modesty wooden. (Make: Godrej. Model no. Talk modular membrane
1
-
10
Supply & Instalation of high back revolving chair with CTS mechanism, upright position locking, mesh back, fixed arms, sylon pedestal (make : Godrej, model: Ventillo High Back or equivalent)
2
-
10
Supply & Instalation of medium back revolving chair with CTS mechanism, upright position locking, mesh back, fixed arms, sylon pedestal (make : Godrej, model: Ventillo Medium Back or equivalent)
12
-
10
Supply & Instalation of visitor chair with CTS mechanism, upright position locking, mesh back, fixed arms, sylon pedestal (make : Godrej, model: Ventillo Visotor or equivalent)
83
-
10
Supply and installation of 3 seater visitors sofa, size: w: 1700 mm. D: 770 mm. H: 780 mm. Made: Designer metallic understructure with black finish fabric covered back and sitting coushion with arms (Make: Godrej. Model no. MICROPLUS Slthr black or equivalent.)
2
-
10
Supply and installation of steel almirah of size: H: 1981 mm. W: 916 mm. D: 486 mm. (Make: Godrej. Model no. Storewel Plain or equivalent.)
20
-
10
Supply and installation of steel display almirah with glass door of size: H: 1981 mm. W: 916 mm. D: 486 mm. (Make: Godrej. Model no. Glass Door Storewel or equivalent.)
14
-
10
Supplying and installation of single bed with beadstead of size: W 958 mm x L 1970 mm x H 970 mm. (Make: Godrej. Model no. OPAL (CC:079-Black)1071 or equivalent.
4
-
10
Supplying and installation of bed side table of size: H 510 mm x W 450 mm x D 450 mm. (Make: Godrej. Model no. EUDORA N15 BEDSIDE TABLE or equivalent.
6
-
10
Supplying Single bed mattress of size W 958 mm x L 1970 mm of good quality. Make Kurlon or equivalent
4
-
10
Supplying Recron fibre filled pillow of sixe 24" X 15" of good quality. Make Kurlon or equivalent
4
-
10
Single Bed Cover. Made from 100% Cotton printed design. Make Bombay Dyeing or equivalent.
4
-
10
Pillow cover. Made from 100% Cotton printed design. Make Bombay Dyeing or equivalent.
4
-
10
TOTAL BILL 3
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 4.18 SAME AS TOTAL AMOUNT OF BILL 3
1
-
-
Boundary wall
-
-
-
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm
132.35
-
10
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation
105.44
-
10
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
117.98
-
10
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
115
-
10
Ordinary Cement Concrete M-15 (mix 1:2:4) with graded stone chips (20 mm down) excluding shuttering and reinforcement if any in ground floor as per IS 456 - 2000. Pakur variety
6.9
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) . Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering
in any concrete work
337.9
-
10
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety.
44.21
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor steel. For works in foundation, basement and upto roof of ground floor / upto 4 m
9.64
-
10
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
287.5
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. With 1:6 cement mortar 20 mm thick plaster
520
-
10
M.S. structural works in columns, beams, etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS : 226, 808 and SP - (6), 1964 connected to one another with bracket, gusset, cleat as per design & direction of Engineer-in-charge complete including cutting to requisite shape & length, fabrication with necessary bolting, metal are welding confirming to IS: 816-1956 & IS: 1995 using electrodes of approved make and brand conforming to IS: 814-1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charges of all tools & plants, labour required for the work including all incidental charges (such as electricity, labour insurance etc.) complete. For structural members of specified sections weighing not less than 22.5 Kg / meter
0.34
-
10
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats
748.94
-
10
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Super Protective 100% Acrylic Emulsion.
748.94
-
10
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
15.18
-
10
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : Two coats (white in shade)
15.18
-
10
Supplying fitting and fixing 600 mm (+/- 30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.)
340
-
10
Labour for fitting wove wire or similar fencing net tightening and fixing the same to the post with staples at every bar (including the cost of cutting and lapping joints in the nets, the cost of staples, binding wire, etc. and of labour for fixing such staples as necessary).
(a) net upto 1350 mm height
340
-
10
Labour for Chipping of concrete surface before taking up Plastering work.
138
-
10
TOTAL BILL 4
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 5.19 SAME AS TOTAL AMOUNT OF BILL 4
1
-
-
Gate
-
-
-
Earth work in excavation of foundation trenches or drains, in all sorts of soils (including mixed soil but excluding laterite or sandstone) i.c. removing, spreaqding or stacking the spoilts within a lead of 75 m 'as directed. The item includes necessary trimming the sides of trenches. Levelling, dressing and ramming the bottom, bailing out water etc. as required complete.. Depth of excavation not exceeding 1500 mm.
7
-
10
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation
7.13
-
10
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
2.66
-
10
Single brick flat soling of picked jhama bricks, ramming and dressing bed to proper level and filling 'joints with powdered earth or local sand.
9.31
-
10
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-20 Grade.
13.77
-
10
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
86.47
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor steel. For works in foundation, basement and upto roof of ground floor / upto 4 m. SAIL/ TATA/RINL
1.73
-
10
Brick work with 1st class bricks in cement mortar (1:4) In foundation and plinth
0.63
-
10
Brick work with 1st class bricks in cement mortar (1:6). In superstructure, ground floor
7.63
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar ic. rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, ic.throating, nosing and drip course where necessary. With 1:6 cement mortar. 20 mm thck plaster in ground floor
84.75
-
10
Making V-groove line ( 12 mm wide,12 mm deep) in plastered surface.
100
-
10
M.S gate of jail type as per approved design made of strong M.S framework, intermediate stiffeners and round/square bars or angles. M.S sheet (not less than 14 gauge), gussets, cleats etc including necessary riverting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in-charge.
0.99
-
10
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 300mm long.
2
-
10
Locking arrangement, rails bottom rollers for Jail type doors including supplying fitting and fixing in position complete as per approved design.
28
-
10
Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. 20 mm dia bolt. 450 mm long
3
-
10
Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials .
18.6
-
10
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paintincluding scraping and preparing the surfacethroughly, complete as per manufacturer'sspecification and as per direction of the EIC. Two coats
84.75
-
10
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Super Protective 100% Acrylic Emulsion.
84.75
-
10
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
75
-
10
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : Two coats (white in shade)
75
-
10
Labour for Chipping of concrete surface before taking up Plastering work.
13
-
10
Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]
17.5
-
10
TOTAL BILL 5
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 6.23 SAME AS TOTAL AMOUNT OF BILL 5
1
-
-
Guard Room
-
-
-
Dismantiling all types of masonry excepting cement concrete plain or reinforcement stacking serviceable materilas at site & removing rubbish as directed within a lead of 75m. In ground floor including roof.
5
-
10
Dismantiling all types of masonry excepting cement concrete plain or reinforcement stacking serviceable materilas at site & removing rubbish as directed within a lead of 75m. Extra rate for each addl. Floor over the rate of ground floor
5
-
10
Dismantiling all types of plain cement concrete work, stacking serviceable materials at site & removing rubbish as directed within a lead of 75m. upto 150mm thick. Ground floor
5
-
10
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor including roof.
5
-
10
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. Extra rate for each addl floor over the rate of ground floor
5
-
10
Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin- Charge prior to execution will be necessary).
50
-
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
21.06
-
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.
5.78
-
10
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
16.77
-
10
Supplying & Filling in foundation or plinth by fine sand (Grading Zone III as per IS:
383-1970) stacked at site.) in layers not exceeding 150mm as directed & consoling the same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity)
15
-
10
Supplying & Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
2.05
-
10
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before
and after the work). With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
1.05
-
10
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-incharge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) Depth upto 1.5 m.
8.64
-
10
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
21.06
-
10
b)Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
3.24
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
20.22
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.25mmto 30 mm shuttering without staging in foundation,all floor, roof & above.
24.64
-
10
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
11.52
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
1.71
-
10
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. foundation, basement all floor, Roof & above
2.64
-
10
Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. foundation, basement all floor, Roof & above
10.65
-
10
Ordinary cement concrete (mix1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering & reinforcement if any, in ground floor as per relevent IS codes. Pakur variety. Foundation, basement all floor, Roof & above
1.27
-
10
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
9.39
-
10
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
4.06
-
10
25mm thk Damp Proof Course with cement concrete (1:1.5:3) (with graded stone aggregate 10mm normal size) & painting the top suface with a coat of bitumen [ VG 40] using 1.7kg. Per Sqm. Including heating the bitumen & cost & carriage of all materials complete. [ Bitumen to be supplied by the Agency]. Foundation, basement all floor, Roof & above
0.82
-
10
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
5.21
-
10
125mm thk. Brick work with 1st class bricks in cement mortar (1:4) in ground floor. Foundation, basement all floor, Roof & above
2.46
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
36.23
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
33.94
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
3.24
-
10
Providing, mixing and laying protection for plaster work admixed with surface active plasticising agents, polymers & additives. (conforming IS 2645 2003 & IS: 9103-2000) at 200 ml per bag of cement all in complete. all floor, Roof & above.
85.2
-
10
Supplying, Drilling/Cleaning hole and injecting Hilti make ETA Approved HIT-RE 500 chemical with the help of Hilti HIT-HDM 330/500 dispenser, into a hole of dia & depth as per manufacturer/structural consultant's specification and fixing rebars of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - Steel will be paid under separate subhead. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consulatnt and in accordance with EOTA-TR-023“guidelines for post installed rebar connections” for approval. all floor, Roof & above.
-
-
-
a) 8 mm Dia - depth 200mm
5
-
10
b) 10mm Dia - depth 100mm
5
-
10
c) 12mm Dia - depth 180mm
5
-
10
d) 16mm Dia - depth 240 mm
5
-
10
e) 20mm Dia - depth 300mm
5
-
10
f) 25mm Dia - depth 375mm
5
-
10
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, Stair, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. all floor, Roof & above.
6.57
-
10
Neat Cement punning about 1.5mm thick in wall dado, window sills floor, drain Note: cement 0.152cum. Per 100sqm in any floors. Roof & above.
22.99
-
10
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). sal: malayasian. any floors. Roof & above.
0.09
-
10
Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: 35mm thick shutters (single leaf).any floors. Roof & above.
2.52
-
10
Supplying, Fitting & Fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. In cement concrete(1:2:4) including cutting of brick work / concrete work as per direction. 40mmx6mm,200mm length. Any floors. Roof & above.
6
-
10
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy
weight) with stainless steel screws etc. complete :125x64x2.5 mm. Any floors. Roof & above.
4
-
10
Supplying, fitting & fixing Brass floor door stopper. Any floors. Roof & above.
1
-
10
Anodised aluminium grip handle with base plate of approved quality fitted & fixed completed.With base plate. 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Any floors. Roof & above.
2
-
10
Anodised aluminium aldrop/sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted & fixed complete. 250mm x 16mm dia bolt. Any floors. Roof & above.
2
-
10
Anodised aluminium barrel / tower / socket bolt (full covered) of approved
manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: . 100mm long x10mm dia bolt. Any floors. Roof & above.
2
-
10
Anodised aluminium barrel/ Tower/ Socket bolt/sliding Hasp bolt ( Full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted& fixed with cadmium plate serews. 300mm long x10mm dia bolt. Any floors. Roof & above.
1
-
10
Anodised aluminium decorative handle (hexagonal/ftuled) of approed quality fitted and fixed complete. 175mm plate x 12mm dia rod x 60mm hexagonal/ fluted. Any floors. Roof & above.
2
-
10
Supplying 6 levers 'Godrej' Crystal Satine Mortice Lock with keys including fitting & fixing complete. Any floors. Roof & above.
1
-
10
Providing, fitting and fixing in position glazed casement/ 2trake or sliding windows and casement or fixed type windows, skylights ventilators with 6mm thick float / smoke glass in natural mat finish anodised colur (10-12 micron) aluminium section of series 40 mitre and jointed crimped with stainless steel friction stay, handles, locks, glazing clips, EPDM gasket, weather pile in frame grooves, nickel chrome plated fixing screws all of approved make including all materials and labour asper drawings, specifications complete. Any floors. Roof & above.
17.28
-
10
Supplying, fitting & fixing two pointed nose aluminium handle including fitting & fixing. any floors. Roof & above.
2
-
10
Supplying, fitting & fixing Aluminium peg stay 300mm long including fitting fixings
2
-
10
Suplying fitting & fixing with integrated grills conforming to IS 1038-1975 & manufactured from rolled or Square steel sections conforming to IS 7452-1974 with non-fricition projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concerete (1:2:4) with stone chips 20mm down cutting holes & mending good damages to match with excluding glazing . M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continously welded with M.S. flats & bars. any floors. Roof & above.
80.64
-
10
Supplying, fitting and fixing Priming one coat of timber or plastered surface with synthetic oil bound primer of approved quality including surface by sand papering etc. any floors. Roof & above.
2.52
-
10
Supplying, fitting and fixing Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. any floors. Roof & above.
2.88
-
10
Supplying, fitting and fixing, applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
36.23
-
10
Supplying and applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
36.23
-
10
Supplying and applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.
37.18
-
10
Supplying, applying and rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
37.18
-
10
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
37.18
-
10
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface :With super gloss (hi-gloss) -Two coats (with any shade except white)
2.52
-
10
Supplying & Applying painting with best quality synthetic enamal paint of approved make & brand including smoothening surface by papering etc. including using of approved putty etc. on the surface, if necessary: On steel or other metal surface: With super gloss (hi-gloss). Two coat (white in shad). any floors. Roof & above.
2.88
-
10
Supplying, fitting & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass. any floors, roof & above.
2.88
-
10
Supplying and laying true to line and level 25 mm. thick precast roof tiles made of cement conc. With stone chips as per approved strength and density set in 25 mm.(Avg) thick cement morter (1:3) & filling up joint (3mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg. per Sqm. back of tiles & then setting close the precast tiles, finishing up the joints with slurry already laid & finally finishing the top surface including providing 150mm high skirting with the top surfac including providing 150mm high skirting with the same tiles flushed with the inside surface of parapet wall finishinbg the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer- in- charge.(levelling if necessary maybe paid separately).For 25mm thick precast tiles (cement 14.6kg./Sqm. Underlayer). any floors, roof & above.
8.41
-
10
Supplying & applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required). any floors, roof & above.
8.41
-
10
Supplying & provide chicken mesh in joints of R.C.C. & brickwork before plastering.All floor and above roof.
168.35
-
10
TOTAL BILL 6
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 7.69 SAME AS TOTAL AMOUNT OF BILL 6
1
-
-
Covered Garage
-
-
-
Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin- Charge prior to execution will be necessary).
150
-
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
12.29
-
10
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
15.89
-
10
Supplying & Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
13.45
-
10
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before
and after the work). With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
36
-
10
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
25.09
-
10
b)Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
24
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
81.3
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.25mmto 30 mm shuttering without staging in foundation,all floor, roof & above.
34.42
-
10
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
7.92
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
3.53
-
10
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. foundation, basement all floor, Roof & above
5.6
-
10
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.
24.33
-
10
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
24
-
10
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
8.66
-
10
Brick work with 1st class bricks in cement mortar(1:6) . In Superstructure , Foundation, basement all floor, Roof & above.
18.38
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
79.8
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 15 mm thick plaster. all floor, Roof & above.
60
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. . With 1:4 cement mortar. 10 mm thick plaster. all floor, Roof & above.
24
-
10
Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
13.5
-
10
Supplying fitting & fixing M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 16 Kg./sq.mtr and above. any floors. Roof & above.
1.44
-
10
Supplying, fitting and fixing, applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
79.8
-
10
Supplying and applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
79.8
-
10
Supplying and applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Solvent based interior grade Acrylic Primer. any floors. Roof & above.
84
-
10
Supplying, applying and rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
84
-
10
Supplying & Applying acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Luxury Quality. The rate includes cost of material, labour, scaffolding and all incidental charges. any floors. Roof & above.
84
-
10
TOTAL BILL 7
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 8.27 SAME AS TOTAL AMOUNT OF BILL 7
1
-
-
DG Platform
-
-
-
Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin- Charge prior to execution will be necessary).
150
-
10
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.
9.41
-
10
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
15.22
-
10
Supplying & Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
20.34
-
10
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before
and after the work). With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
58.09
-
10
Antitermite treatment to bottom surface (in case of Masonry foundation and basements) and the sides (Upto a height of 300mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m. area. The work shall be carried out as per specification described in 6.2.1 of code IS-6313 (Part-II) 1981. (Mode of Measurement will be the plan area of foundation treated.)
20.61
-
10
b)Antitermite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrefos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 liter per sq.m. of the surface before sand bed or subgrade is laid. Holes upto 50mm.to 75mm. deep at 150mm. centre to centre both ways shall be made with 12mm. diameter mild steel rod on the surface to facilitated saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in Para 6.4 of code IS-6313 (Part-II)-1981. (Mode of measurement will be per sq.m. of plan area of plinth treated).
38.73
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work. Ground floor
22.8
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works.25mmto 30 mm shuttering without staging in foundation,all floor, roof & above.
32.98
-
10
Supplying & laying Polythene sheet (150gm/sqm.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. All floor, Roof & above
6.48
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For work in foundation, basement all floor, Roof & above. Tor steel Fe 500 (SAIL/TATA/RINL).
2.19
-
10
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. foundation, basement all floor, Roof & above
10.68
-
10
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.
15.04
-
10
Brick soling with picked jhama bricks including preparetion of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
38.73
-
10
Brick work with 1st class bricks in cement mortar(1:4). In foundation and plinth
8.66
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noisng and dripourse, chiping, scaffolding / staging where necessary. With 1:6 cement mortar. 20 mm thick plaster. Foundation, basement all floor, Roof & above.
105
-
10
Supplying, fitting and fixing, applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coat. any floors. Roof & above.
105
-
10
Supplying and applying protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coats. Super Protective 100% Acrylic Emulsion. any floors. Roof & above.
105
-
10
M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1957 & IS: 1161- 1958 connected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebers as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.For trusses spanning up to 12.00 m
2
-
10
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). With 0.5 mm thick sheet
77
-
10
TOTAL BILL 8
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 9.21 SAME AS TOTAL AMOUNT OF BILL 8
1
-
-
Parking & Walkway
-
-
-
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
450
-
10
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
450
-
10
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. 25mm to 30mm thick wooden shuttering as per decision &direction of Engineer-In-charge
36
-
10
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety.
67.5
-
10
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
450
-
10
Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. 50 mm thick interlocking designer concrete paver block M- 30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658- 2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.) Coloured Decorative
450
-
10
Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per direction. Brick-on-end edging (250 mm) depth
180
-
10
TOTAL BILL 9
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 10.08 SAME AS TOTAL AMOUNT OF BILL 9
1
-
-
Storm Water Drain
-
-
-
Earthwork in excavation in drains and other structures in all sorts of soil or loose material including removing surplus spoils and debris to a maximum lead of 100m including bailing outing manually or by pumps as per specification and drawing and as directed by the Engineer.(Trench shall be kept dry by dewatering and removal of slush.) Depth of excavation not exceeding 1.5m below G.L
225
-
10
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation
75
-
10
Brick work with 1st class bricks in cement mortar (1:4). In foundation and plinth.
187.5
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor. With 1:4 cement mortar. 20 mm thick plaster
375
-
10
1.5mm thick neat cement punning.
375
-
10
Brick soling with picked jhama bricks including preparation of bed as necessary with joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. Single brick flat soling(thickness 75mm.). Foundation, basement all floor, Roof & above
212.5
-
10
Supplying and laying cement concrete (1:2:4) for bed concrete including foamwork, consolidation and curing complete.
21.25
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. Steel shuttering or 9 to 12 mm thk. Approved quality ply board shuttering in any concrete work.
362.5
-
10
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineering charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix formula. In ground floor and foundation. [using concrete mixture] M-25 Grade.
28.71
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(i) Tor steel / Mild steel. For works in foundation, basement and upto roof of ground floor / upto 4 m
3.16
-
10
Providing & laying precast cover slabs for covering masonary drain, concrete grade M30, 125mm thick with 100 x 100 x 6 angle & double layer reinforcement & diagonal reinforcement all complete with labour & materials. 1250 x1050 x 125
25
-
10
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe
75
-
10
Providing and laying 75mm thick screeding on bed of drains in cement concrete (1:2:4) with 6mm & down chips including consolidation and curing complete.
162.5
-
10
Constructing catch pit size 450 x 375 with cement 250thk. brick work (4:1), on 100thk PCC(1:2:4) bed, inside 1:3 plaster with cement punning, 100thk rcc slab with nominal reinforcement as per standard design C.I grating (450 mm X 375 mm) with hinged gully grating with frame wt not less than 50 kg including excavation and removal of soils.
17
-
10
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3)with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying, fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjacent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials. 900 mm X 750 mm (inside) chamber including fitting and fixing
S.W. master trap of 150 mm dia. of approved make
49
-
10
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3)with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying, fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjacent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials. 1050 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 300 mm dia. of approved make. With Pakur variety. (SAIL/TATA/RINL)
3
-
10
Providing, fitting, fixing 160mm dia UPVC pipes A- Type and fittings conforming to IS:13592-1992 pipes with screening for weep holes.
34
-
10
TOTAL BILL 10
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 11.18 SAME AS TOTAL AMOUNT OF BILL 10
1
-
-
Rain Water Harvesting
-
-
-
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but
excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
-
-
-
i) Depth up to 1.5 m.
86.63
-
10
ii) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not
requiring shoring
30.32
-
10
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(Payment to be made on basis of measurement of finished quantity of work).
-
-
-
With earth obtained from excavation of foundation.
38.98
-
10
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-incharge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). Fro additional depth beyond Depth upto 1.5m
48
-
10
Filling in foundation or plinth by silver sand in layers not exceeding 150mm as by thorough saturation with water, ramming complete exceeding 150 mm as directed and consolidating the same including the cost of supply of sand. (Payment to be made on measurement of finished quantity)
17.33
-
10
Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS-6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated).
57.75
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved
thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
-
-
-
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
68.68
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(i) Tor steel / Mild steel. (a) For works in foundation, basement and upto roof of ground floor / upto 4 m
1.64
-
10
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety
8.66
-
10
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS code Pakur variety
8.66
-
10
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
57.75
-
10
Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth
6
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:6 cement mortar. 25 mm thick plaster
16
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor). With 1:6 cement mortar. 15 mm thick plaster
21.23
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor). With 1:4 cement mortar. 10 mm thick plaster
115.5
-
10
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
147.35
-
10
Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim.Round 450 mm X 100 mm X 75 kg (approx.)
2
-
10
Supplying & fixing C.I. rungs to side walls of water reservoir all complete.
14
-
10
Puddle coller of G.I. pipe (medium quality) of different diameters 450mm long, both and fully socket threaded and welded with 6mm thick M.S. plate, fitted & fixed in R.C.C. work, with all labour & materials.
-
-
-
200mm dia welded with 6mm thick 400mm x 400mm M.S. plate (outlet)
4
-
10
125mm dia welded with 6mm thick 300mm x300mm M.S. plate (inlet)
4
-
10
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats.
21.23
-
10
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Super Protective 100% Acrylic Emulsion.
21.23
-
10
Providing Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. Work as instructed.
70
-
10
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc.
16
-
10
Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc. Note : Cement 0.152 cum per 100 sqm
243.5
-
10
Bailing or pumping out water from foundation trenches. Double of Earth work
70
-
10
TOTAL BILL 11
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 12.31 SAME AS TOTAL AMOUNT OF BILL 11
1
-
-
Underground Reservoir
-
-
-
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but
excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
-
-
-
i) Depth up to 1.5 m.
78.38
-
10
ii) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not
requiring shoring
66.62
-
10
Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.(Payment to be made on basis of measurement of finished quantity of work).
-
-
-
With earth obtained from excavation of foundation.
48.33
-
10
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-incharge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). Fro additional depth beyond Depth upto 1.5m
84
-
10
Filling in foundation or plinth by silver sand in layers not exceeding 150mm as by thorough saturation with water, ramming complete exceeding 150 mm as directed and consolidating the same including the cost of supply of sand. (Payment to be made on measurement of finished quantity)
22.5
-
10
Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS-6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated).
45
-
10
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved
thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
-
-
-
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
117.7
-
10
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
(i) Tor steel / Mild steel. (a) For works in foundation, basement and upto roof of ground floor / upto 4 m
7.15
-
10
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineerin charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] M-25 Grade. Pakur variety.
37.62
-
10
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS code Pakur variety
6.75
-
10
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
45
-
10
Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth
12.5
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:6 cement mortar. 25 mm thick plaster
50
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor). With 1:6 cement mortar. 15 mm thick plaster
51.23
-
10
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (ground floor). With 1:4 cement mortar. 10 mm thick plaster
53.63
-
10
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
123.4
-
10
Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim.Round 450 mm X 100 mm X 75 kg (approx.)
6
-
10
Supplying & fixing C.I. rungs to side walls of water reservoir all complete.
15
-
10
Puddle coller of G.I. pipe (medium quality) of different diameters 450mm long, both and fully socket threaded and welded with 6mm thick M.S. plate, fitted & fixed in R.C.C. work, with all labour & materials.
-
-
-
200mm dia welded with 6mm thick 400mm x 400mm M.S. plate (outlet)
4
-
10
125mm dia welded with 6mm thick 300mm x300mm M.S. plate (inlet)
4
-
10
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Two coats.
51.23
-
10
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Super Protective 100% Acrylic Emulsion.
51.23
-
10
Providing Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. Work as instructed.
70
-
10
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc.
50
-
10
Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc. Note : Cement 0.152 cum per 100 sqm
41
-
10
Bailing or pumping out water from foundation trenches. Double of Earth work
70
-
10
TOTAL BILL 12
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 13.31 SAME AS TOTAL AMOUNT OF BILL 12
1
-
-
Landscaping Work
-
-
-
Providing Plant Allyssum white in full bloom well developed fresh &
healthy Plant in 20 cm Earthen Pot/Plastic Pot
25
-
10
Providing Plant Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot
25
-
10
Providing of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5
suckers, well developed, fresh and healthy with lush green foliage in 20 cm
size of Earthen pot / Plastic pot.
10
-
10
Providing of Dracaena Song of india plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot
10
-
10
Mexican grass turf with earth 50mm To 60mm thickness
100
-
10
Water tank 5000 ltr.
10
-
10
Mali (Semi-Skilled)
125
-
10
Cow dung Manure
20
-
10
TOTAL BILL 13
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 14.09 SAME AS TOTAL AMOUNT OF BILL 13
1
-
-
Sanitary & Plumbing Works
-
-
-
Supplying, fitting and fixing shower of approved brand and make. Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).
3
-
10
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
-
-
-
25 mm
10
-
10
20 mm
5
-
10
32 mm
5
-
10
40 mm
5
-
10
50 mm
5
-
10
Supplying, fitting and fixing bib cock or stop cock.
-
-
-
Chromium plated Bib Cock with wall flange (Equivalent to Code No.5047 & Model - Florentine of Jaquar or similar brand).
5
-
10
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
55
-
10
Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand).
13
-
10
Supplying, fitting and fixing pillar cock of approved make CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand).
2
-
10
Supplying, fitting & fixing CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand
18
-
10
Supplying, fitting & fixing Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).
5
-
10
Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent. 15 mm
5
-
10
Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
13
-
10
Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect.
-
-
-
20 mm
15
-
10
25 mm
15
-
10
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.
-
-
-
a) For Exposed Work CPVC Pipes Class-I,SDR-11
-
-
-
20 mm
75
-
10
25 mm
50
-
10
32 mm
25
-
10
40 mm
15
-
10
50 mm
10
-
10
b) For Concealed Work CPVC Pipes Class-I,SDR-11
-
-
-
15mm
175
-
10
20mm
75
-
10
25mm
50
-
10
Supplying, fitting & fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD - 1785 & threaded to match with GI Pipes as per IS : 1239 (Part - I). With all necessary accessories, specials viz. socket, bend, tee, union, coss, elbo, nipple, lomgscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making thread, cutting trenches upto 1.5 metre below suffacein all sorts of soil & refilling the same directed complete in all respect. (Payment will be made on the centre line measurments of the total pipe line including all specials. No separate payment will be made for assesories, specials) PVC Pipes (Dia) 40mm
75
-
10
Supply, Fitting & Fixing of complete Bottle waste tap. 32 mm
15
-
10
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
16
-
10
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.5000 litre capacity capacity
2
-
10
Labour for hoisting plastic water storage tank. Above 1500 litre upto 5000 litre capacity.
-
-
-
a) Upto 1st story from GL.
4
-
10
b) Extra for each additional floor.
4
-
10
Supplying, fitting and fixing white vitreous china best quality approved make wash basin or oval type (Counter top with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
13
-
10
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. Sink with drain board 1050 mm X 450 mm X 180 mm
2
-
10
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
-
-
-
i) 600 mm lomg
10
-
10
ii) 750 mm long
5
-
10
Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 750 mm long
7
-
10
Supplying, fitting & fixing UPVC pipes All Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen /M-Seal etc) complete. 160mm Dia
150
-
10
Supplying fitting & fixing W.C. Connector (450 mm long) W / lipring
75 mm
15
-
10
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
-
-
-
a) With 'P' trap
15
-
10
b) With 'S' trap
1
-
10
Suppling, fitting and fixing Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
3
-
10
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap. 580 mm X 440 mm
2
-
10
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C. Plastic (hallow type) black
16
-
10
Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. 600 mm X 150 mm. Salt glazed stone ware.White vitreous chinaware
50
-
10
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. C. P. Flush Pipe
6
-
10
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 465 mm X 355 mm X 265 mm
6
-
10
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
6
-
10
Supplying, fitting and fixing liquid soap container. Cromium plated.
15
-
10
Supplying, fitting & fixing Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm
19
-
10
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
12
-
10
Supplying, fitting and fixing towel rail with two brackets Aluminium. 25 mm dia. & 750 mm long
23
-
10
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety. (SAIL/TATA/RINL)
25
-
10
iii) Extra for each additional depth of 150 mm or part thereof beyond initial 600 mm depth.
10
-
10
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. For 100 users. With Pakur variety. (SAIL/TATA/RINL)
1
-
10
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (SAIL/TATA/RINL)
1
-
10
Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) 560 mm dia.
25
-
10
Supplying, fitting and fixing shower of approved brand and make. Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
16
-
10
Supplying, fitting and fixing shower of approved brand and make. Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).
16
-
10
Supplying fitting & fixing water heater 10Ltr capacity. Volume 10Litre, Rate Wattage-2kw, Voltage / Frequency (V/Hz) : Voltage / Frequency (V/Hz), Temperature Range:25ºC to 75ºC, Working Pressure (Mpa): 08, Inlet / Outlet Connection (Inch): 1/2
3
-
10
TOTAL BILL 14
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 15.68 SAME AS TOTAL AMOUNT OF BILL 14
1
-
-
Tubewell
-
-
-
Installation of 1 No 250 mm x 150 mm dia Tubewell along with providing, testing and commissioning of Submersible pumpset
-
-
-
Labour for boring through any type of soil for sinking tube well of required dia. With top enlargement by rig boring system including hire charges and labour for supplying of suitable dia. Casting pipes upto full depth of tube well with necessary sockets, tools and plants, staging, force pumping set and making necessary arrangements for boring and also cost of withdrawing the casing pipes and lowering pipes, stainers, blind pipes etc. complete. (The casing pipe should have a minimum 50 mm gap in between the outside of the tube well pipe and the casing pipe). a) For depth upto 250 meter for 150 dia. Tube well with top enlargement of 250 mm dia.
-
-
-
i) First 50 metre
50
-
10
ii) Next 50 metre
50
-
10
iii) Rest 50 metre
50
-
10
iv) For additional depth beyond 150 m
100
-
10
Supplying PVC strainer of approved make with adapter conforming to I.S.12818specifications. 150 mm dia.
30
-
10
Supplying, fitting & fixing heavy type bell mouth PVC reducing socket
-
-
-
200 mm X 250 mm
1
-
10
Nipple (300 mm long), Dia 150mm
1
-
10
Supplying, fitting and fixing G.I. cap at top. 300 mm
1
-
10
Supplying, jointing and lowering vertically uPVC threaded pipes with necessary sockets, special fittings and jointing as required including cost of all jointing materials, hire charges of tools and plants, cutting pipes to required sizes with threads as necessary and lowering the pipes within the borewell vertically as per direction of the Engineer-in-charge
-
-
-
150 mm nb Sch 80 and as per ASTM D1785
185
-
10
250 mm nb Sch 80 and as per ASTM D1785
55
-
10
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yeild in gallons per hour with "V" notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect.
3
-
10
Labour for making arrangement for showing vertically test including the cost for hire charges of tools and plants, scaffolding labour etc. all complete.
1
-
10
Collecting sample of water for physical bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc, complete in all respect as per direction and as per IS 10500 parameters.
1
-
10
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having sizefrom 2 mm to 5 mm or the size aproved by the Engineer - in- charge including cost of materials labour and equipment complete.
4
-
10
Packing the annular space between the outside of the housing pipe & the bore with puddled clay balls of approved size as per direction of the Engineer - in- charge with cost of materials & labour complete.
15
-
10
Providing & fixing bottom plug as required for 150 mm dia PVC pipe including cost of materials & labour with fixing in position complete for sealing the bottom of assembly.
1
-
10
Supplying, fitting & fixing 300 mm M.S housing clamp of approved quality
1
-
10
Providing 200mm centre guide.
10
-
10
Geophysical investigation of the aquifer by electro logging system with all tools & plants as necessary including supply of necessary report.
1
-
10
Part B : SUBMERSIBLE PUMPSET & ACCESSORIES
-
-
-
Supplying, fitting, fixing and lowering inside the tubewell submersible pump having delivery outlet fitted in spring loaded non return valve capable of delivering required discharge and against a total head from all cases ( Duty conditions given below )directly coupled with submersible motor of reqd. HP to give the required discharge suitable for operation 220-230 volts plus minus 8%, 1 phase, 50 c/s AC supply. The materials of pump and motorsshaft aluminium bronze thrust bearing plate. Noryl diffuser, with necessary accessories for submersible pumping set of approved make / model and tubewell top cover suitable for pump set (before procurement, manufacturer's test report / performance curve chart etc. to be submitted for approval) (Crompton or equivalant)) 2HP
2
-
10
S/F & F floor mounted pump motor control panel with sheet metal enclosure on suitable angle iron frame including earthing attachment Including complete inter connection of star delta starter,ammeter,voltmeter,Phase indicator,single phase preventer etc. with suitable size of copper wire for10 HP submersible pump-motor set. [Make: Havells/Cat No.: IHDASALBW]
2
-
10
Supplying, fitting and fixing electrical water level guard with two pole electrodes.
2
-
10
CI sluice valve with flanged ends drilled to as per IS 1358/1962 and having all cost component as per IS 780/1971 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT / sq.cm. spindle nut valve and seat faces of hardware resisting manufactured from best quality gun metal, conforming to IS 780/1971 paint tested to 21 kg. (Hydraulic Pressure) sq.cm. valve opening to anticlockwise direction fitted and fixed complete. 80 mm dia
2
-
10
Earthing with 50 mm. (2") dia. Galvanised iron pipe 3.64 mm. thick x 3 Mtr. (10') long and 1x4 SWG G.I. wire (4 Mts. Long) 13 mm. (1/2") dia x 80 mm. (3") long G.I. bolts double nuts double washers including S/F 15 mm. dia. G.I. pipe protection (1 Mtr. long) to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65 Mts. (12') below the ground level and restoring the surface duly rammed. (Tata M)
2
-
10
TOTAL BILL 15
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 16.30 SAME AS TOTAL AMOUNT OF BILL 15
1
-
-
Medium Voltage Switch Board
-
-
-
Supply, delivery at site eraction, testing & commissioning of vertical floor mounting free standing, extensible on either side, compartmentalised cubical type panel board made of 14 SWG (2.04 mm) CRCA MS sheet suitable for 500/415V, 50 HZ, AC , 3 Phase and neutral system having the following features panel shall be designed to ensure that the weight of the components is adequately supported without deformation or loss in allignment. The doors of the cubicle shall be fitted with dust excluding neoprene gaskets with fastners for proper compression of the gaskets. 415V MAIN LT PANEL
1
-
10
Panel shall be multitier comparmentalised cubical type, extensible on either side and shall be treated with all anticorrosive process before painting with two coats of zine chromate primer and final approved shade of enamel paint.
-
-
-
Busbars shall be of continuous rated Aluminium adequate for speciifed rated continuous and short circuit current covered by, proper graded heat shrinkable PVC sleeves (colour coded). Busbars shall be supported by suitable hylaml/DMC/ SMC or compatable insulator supports. HIgh tensile bolts and springs washers are to be provided on all busbars and suitable drilled holes for connection joints. The busbars shall have a throuth fault withstand capacity of 31 MVA, RMS symmetrical for one second. the interconnections between the busbars and the circuit breakers shall be made by continuous rated Aluminium strips suitably covered by proper graded heat shrinkable colour coded PVC sleeves. The earth busbar shall run through the length of the panel and terminated at two ends.
-
-
-
All the MCCBs shall be provided with extended rotary operated mechanism. Safety interlocks are toe be provided to prevent the doors of the compartments housing the MCCBs to prevent the doors to open when the MCCBs are 'ON' position.
-
-
-
Adequate cabling space should be available in the panel with cable supports, cable alleys, etc. Provision for top/bottom entry and termination of required number of XLPE cable shall be provided. The position of control switches, push buttons, levers, etc requiring manual operation shall be at a height not exceeding 1850 mm from the finished floor level. The rate shall also include providing and fixing space heater with thermostat control temperature conlroler including connecting the same with the system with all other accessories viz sockets. etc. required. The panel shall also be provided with cubicle illumination lamps as per requirement including connecting the same within the panel with all other accessories required.
-
-
-
The panel shall also comprise of necessary meters, CTs, protection MCBs/HRC fuses, indication lamps relays, lifting bolts, label inscriptions (metalic engraved identification tags) describing the rating of the breakers, bus couplers, designation of the feeders etc including all other accessories, complete as per IE rules and reg ulations conforming to relevant IS and duly approved by Client/Consultant. The rate shall include necessary cutting chases, and mending good damages during installation. The panel shall have the following major components.
-
-
-
INCOMER
-
-
-
2 Nos 200A, 4P MCCBs of rated service voltage upto 690V. with manual push buttons, indications, current sensors, CTs, etc confoirming to the spedfication and as follows:
-
-
-
Icu-36 KA (at 415V, 50 HZ), Ics=100% Icu and Icw not less than 36 KA for 1 Sec.
-
-
-
Thermo-magnetic based O/L & S/C releases.
-
-
-
Rated impulse withstand voltage not less than 12 KV for main conducting paths.
-
-
-
Auxiliary contacts, shunt trip coils etc.
-
-
-
2 sets CT Operated Digital Multifunction Meter having Cl-1 accuracy and showing (A, V, F).
-
-
-
2 sets (3 nos each) RYB cluster type LED phase indlcation lamps.
-
-
-
2 sets (3 nos each) - ON/OFF/TRIP cluster type LED indication lamps.
-
-
-
1 sets - Line Voltage Monitoring Module.
-
-
-
BUS-COUPLER
-
-
-
1 No. Bus-coupler. 160A, 4P MCCB of rated service voltage upto 690V, 50 HZ with manual push buttons, indications, courrent sensors. CTs etc. conforming to the speciflcation. Icu=36KA (at 415V, 50 HZ). Ics-100% Icu and lcs not less than 36KA for 1 sec. microproccessor based O/L, S/C releases with provision for backnet, auxiliary contacts, shunt trips. 4 Nos ON/OFF/TRIP cluster type LED indication lamps etc complete.
-
-
-
Electrical interlocking between fire panel feeder and buscoupler breaker (1 No feeder & 1 No. buscoupler unit) as follow:
-
-
-
Auto/manual selection for whole operation.
-
-
-
BUSBAR
-
-
-
1 sets - 200A, 415V, 50HZ, 31 MVA Amps symmetrical continuous rated Aluminium busbars (25mmX10mm) for phases and (25mmX6mm) for neutral mounted on suitable hylam/DMC/SMC insulators/supports with proper graded colour coded heat shrinkable PVC sleeves. Surge protection device with MPCB with rated KA.
-
-
-
OUTGOING
-
-
-
a)1 No 160A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
b)1 No 160A, 4P MCCBs of rated service voltage upto 690V. Icu=36KA Ics=100% Ieu at 415 V, 50HZ with motor operated microprocessor based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
c)1 No 40A, 4P MCCBs of rated service voltage upto 690V. Icu=25KA Ics=100% Ieu at 415 V, 50HZ with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
d)3 Nos 40-63A, 4P MCB of rated service voltage upto 440V, Icu=10KA, Ics = 100% Icu at 415V 50 HZ, with thermo-magnetic based O/L & S/C releases.
-
-
-
e)4 Nos 6-32A, 4P MCB of rated service voltage upto 440V, Icu=10KA, Ics = 100% Icu at 415V 50 HZ, with thermo-magnetic based O/L & S/C releases.
-
-
-
f)7 Nos - 6-32A 2P MCB of rated service voltage upto 240V, Icu=10KA, Ics = 100% Icu at 220V 50 HZ, with thermo-magnetic based O/L & S/C releases.
-
-
-
g) 4 Nos - 6-32A 4P MCB with 3 Phase DOL starter with start/stop push buttons, LED Indication Lamps for ON/OFF/TRIP Indication, control fuse auto/manual selector switch, etc for DOL starting of 3 Phase motor with efficiency not less than 70% overload relays and single phasing protection.
-
-
-
EARTH BUSBAR
-
-
-
1 Set - 25 mm X 6 mm GI busbar funning along the base frame covering entire length of the panel with high tensile bolts, nuts, etc. and number of drilled holes as required for earth connection at both ends.
-
-
-
1 No.Danger Board.
-
-
-
LIFT PANEL (AT LIFT M/C ROOM)
1
-
10
Supply, delivery at site eraction, testing & commissioning of vertical wall mounting free standing, compartmentalised cubical type panel board made of 14 SWG (2.04 mm) CRCA MS sheet suitable for 500/415V, 50 HZ, AC , 3 Phase and neutral system having the following features panel shall be designed to ensure that the weight of the components is adequately supported without deformation or loss in allignment. The doors of the cubicle shall be fitted with dust excluding neoprene gaskets with fastners for proper compression of the gaskets.
-
-
-
INCOMER
-
-
-
1 No - 40A 4P MCB of rated service voltage upto 440, Icu=10KA, Ics = 100% Icu at 440V 50 HZ, with thermo-magnetic based O/L & S/C releases etc as necessary.
-
-
-
Rated impulse withstand voltage not less than 12 KV for main conducting paths.
-
-
-
Auxiliary contacts, shunt trip coils etc.
-
-
-
1 set (3 nos each) RYB cluster type LED phase indlcation lamps.
-
-
-
1 set (3 nos each) - ON/OFF/TRIP cluster type LED indication lamps.
-
-
-
BUSBAR
-
-
-
1 set - 40A, 415V, 50HZ, 31 MVA Amps symmetrical continuous rated Aluminium busbars (1X25mmX6mm) for phases and (1X25mmX6mm) for neutral mounted on suitable hylam/DMC/SMC insulators/supports with proper graded colour coded heat shrinkable PVC sleeves. Surge protection device with MPCB with rated KA.
-
-
-
OUTGOING
-
-
-
a) 2 Nos - 40A 4P RCCB(300mA) of rated service voltage upto 415V, Icu=10KA, Ics = 100% Icu at 220V 50 HZ, with thermo-magnetic based O/L,S/C & E/Freleases.
-
-
-
b) 1 No - 25A 2P RCCB(30mA) of rated service voltage upto 415V, Icu=10KA, Ics = 100% Icu at 220V 50 HZ, with thermo-magnetic based O/L,S/C & E/Freleases.
-
-
-
c)1 No - 6-32A 2P MCB of rated service voltage upto 240V, Icu=10KA, Ics = 100% Icu at 220V 50 HZ, with thermo-magnetic based O/L & S/C releases.
-
-
-
EARTH BUSBAR
-
-
-
1 Set - 25 mm X 6 mm GI busbar funning along the base frame covering entire length of the panel with high tensile bolts, nuts, etc. and number of drilled holes as required for earth connection at both ends.
-
-
-
1 No.Danger Board.
-
-
-
MV CABLE
-
-
-
Supply of 1.1KV 3Cx6sqmm XLPE Armoured Al. cable as directed by EIC.
320
-
10
Supply of 1.1KV 3.5Cx70sqmm XLPE Armoured Al. cable as directed by EIC.
100
-
10
Supply of 1.1KV 3.5Cx95sqmm XLPE Armoured Al. cable as directed by EIC.
200
-
10
Supply of 1.1KV 4Cx6sqmm XLPE Armoured Al. cable as directed by EIC.
350
-
10
Supply of 1.1KV 4Cx16sqmm XLPE Armoured Al. cable as directed by EIC.
20
-
10
Supply of 1.1KV 4Cx6sqmm XLPE Armoured CU. cable as directed by EIC.
40
-
10
CONTROL CABLE
-
-
-
Supply & Laying of "1.1kV grade "Cu. Armoured Control Cable" including terminations as required. The rate shall be inclusive of necessary supporting & clamping arrangement for laying of cables within tray/pipe/trench. The installation shall confirm IS : 1255.1983 & amended upto date.
-
-
-
Supply of 1.1KV 8Cx2.5sqmm XLPE Armoured CU. cable as directed by EIC.
100
-
10
Supply of 1.1KV 10Cx2.5sqmm XLPE Armoured CU. cable as directed by EIC.
100
-
10
COMPRESSION GLAND
-
-
-
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
-
-
-
For 3 core
-
-
-
upto 6 sqmm.
12
-
10
For 4 core
-
-
-
upto 6 sqmm.
14
-
10
upto 16 sqmm.
2
-
10
For 3½ core
-
-
-
upto 70 sqmm.
2
-
10
upto 95 sqmm.
4
-
10
FINISHING CABLE ENDS
-
-
-
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
-
-
-
4 core 6 sqmm cable.
26
-
10
4 core 16 sqmm cable.
2
-
10
3½ core 70 sqmm cable.
2
-
10
3½ core 95 sqmm cable.
4
-
10
SCHEDULE OF RATES FOR LAYING OF XLPE/PVC INSULATED AND ARMOURED CABLES
-
-
-
LAYING ON WALL / SURFACE WITH SADDLES / CLAMPS
-
-
-
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
500
-
10
LAYING THROUGH RCC/HUME/GI PIPE
-
-
-
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GIPipe/open masonary trench for single, 2, 3, 3½ & 4 core.
200
-
10
Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core
300
-
10
SCHEDULE OF RATES FOR EARTHING INSTALLATIONS
-
-
-
Excavation of soft soil for installation of Earth Electrode and filling & ramming.
36
-
10
EARTHING INSTALLATION – WITH PIPE ELECTRODE :
-
-
-
Earthing with 50 mm dia GI pipe (TATA-Medium) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.
4
-
10
EARTHING INSTALLATION BY GI PIPE –
(FOR SUB-STATION NEUTRAL/EQUIPMENT EARTHING) :
-
-
-
Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.
4
-
10
Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode.
4
-
10
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
12
-
10
Extra for treatment of soil by using salt & charcoal or coke for plate electrode.
12
-
10
EARTH BUSBAR:
-
-
-
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
10
-
10
EQUIPMENT EARTHING:
-
-
-
Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.
20
-
10
EARTH CONTINUTY CONDUCTOR:
-
-
-
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages
-
-
-
No. 8 SWG
150
-
10
EARTHING CONNECTION FROM EARTH ELECTRODE TO TRANSFORMER NEUTRAL/ EARTH BUSBAR
-
-
-
Extra for connecting the neutral of Transformer/Earth busbar to earth electrode including S & F 50 mm x 6 mm Galvanized (Hot Dip) steel strip on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape.
10
-
10
TOTAL BILL 16
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 18.02 SAME AS TOTAL AMOUNT OF BILL 16
1
-
-
Internal Electrification Work
-
-
-
MCB DISTRIBUTION BOARD
-
-
-
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
-
-
-
2+4 way Enclosure (607710).
1
-
10
2+8 way Enclosure (607711).
3
-
10
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment
-
-
-
4 way Enclosure (607715).
2
-
10
6 way Enclosure (607716).
4
-
10
MCB
-
-
-
Supplying and fixing 240/415V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
-
-
-
6-32 A SP.
124
-
10
6-32 A DP.
6
-
10
6-32 A FP.
4
-
10
40,63 A FP.
2
-
10
MCB ENCLOSURE
-
-
-
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment
-
-
-
2 Way.
2
-
10
LAYING & FIXING POLYTHENE PIPE, MS BOXES, SWITCHES ETC.
-
-
-
Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)
-
-
-
19mm dia 3mm thick Polythene Pipe.
800
-
10
25mm dia 3mm thick Polythene Pipe.
400
-
10
Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works
-
-
-
19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
1000
-
10
Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works
-
-
-
25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.
150
-
10
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works
-
-
-
100 mm x 100 mm x 65 mm .
5
-
10
200 mm x 150 mm x 65 mm .
5
-
10
Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws
-
-
-
100 mm x 100 mm x 65 mm .
5
-
10
200 mm x 150 mm x 65 mm .
5
-
10
CONCEALED WIRING WITH PVC INSULATED & UNSHEATHED SINGLE CORE STRANDED COPPER WIRE ‘'FR'
-
-
-
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required
-
-
-
2 x 36/0.3 (2.5 sqmm) .
530
-
10
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC .
1500
-
10
2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC .
400
-
10
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
10
-
10
WIRING WITH PVC INSULATED & UNSHEATHED SINGLE CORE STRANDED COPPER WIRE ‘'FR' – IN PVC RIGID CONDUIT 'FR' (ISI MARKED) ON WALL/CEILING
-
-
-
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required
-
-
-
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.
1000
-
10
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.
355
-
10
2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC
30
-
10
CONCEALED WIRING WITH PVC INSULATED & UNSHEATHED SINGLE CORE STRANDED COPPER WIRE ‘'FR' AND MODULAR TYPE SWITCHES.
-
-
-
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish
-
-
-
2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
-
-
-
Average run 6 mtr .
40
-
10
Average run 8 mtr .
85
-
10
Average run 10 mtr .
30
-
10
Average run 12 mtr .
38
-
10
WIRING WITH PVC INSULATED & UNSHEATHED SINGLE CORE STRANDED COPPER WIRE ‘'FR' – IN PVC RIGID CONDUIT 'FR' (ISI MARKED) ON WALL/CEILING WITH MODULAR TYPE SWITCH.
-
-
-
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.
-
-
-
Average run 6 mtr .
10
-
10
SUPPLY & FIXING GI MODULAR BOXES, SWITCHES ETC.
-
-
-
Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
-
-
-
4 Module .
39
-
10
6 Module .
50
-
10
Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
-
-
-
2 Module .
48
-
10
Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required .
113
-
10
Supply & Fixing 240 V 16 A Modular key type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required .
13
-
10
Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
134
-
10
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
37
-
10
1NO BLANK PLATE.(1M)
36
-
10
Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
24
-
10
FINISHING COPPER WIRE ENDS
-
-
-
Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
-
-
-
2.5sqmm.
1000
-
10
4sqmm.
100
-
10
6sqmm.
4
-
10
LIGHT & FAN FIXTURE
-
-
-
RECESSED LUMINAIRE
-
-
-
Supply of recess mounted LED light fixture with 34W luminaire. (PHILIPS RC380B LED34S-6500 G3 PSD OD (FULLGLOW) OR SIMILAR APPROVED EQUIVALENT)
92
-
10
SURFACE LUMINAIRE
-
-
-
Supply of surface mounted LED light fixture with 20W lamp.(PHILIPS BN021C LED20S PSU CDL GR (SMARTBRIGHT) OR SIMILAR APPROVED EQUIVALENT)
38
-
10
Supply of surface mounted LED light fixture with 9W lamp.(HAVELLS LHEXARP7PN1W009 (EDGE LITE) OR SIMILAR APPROVED EQUIVALENT)
3
-
10
Supply of surface mounted LED light fixture with 10W lamp.(PHILIPS DN170C LED10S-6500 PSU WH(GREENLED SURFACE MOUNTED) OR SIMILAR APPROVED EQUIVALENT)
32
-
10
Supply of surface mounted LED light fixture with 16W lamp.(PHILIPS SN200C LED16S-6500 PSU OD WH(CIRRUS MINI PRO) OR SIMILAR APPROVED EQUIVALENT)
68
-
10
Supply of surface mounted LED light fixture with 16W lamp.(PHILIPS BRP042 LED19 CW MR S1 PSU GR(SMARTBRIGHT STREET) OR SIMILAR APPROVED EQUIVALENT)
12
-
10
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.
233
-
10
Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.
12
-
10
Bulkhead LED light fixture with 6W luminaire. (PHILIPS WT202W LED6S NW PSU S2 PC (ENDURA LED BULKHEAD) OR SIMILAR APPROVED EQUIVALENT)
4
-
10
Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.
4
-
10
CEILING FAN
-
-
-
Supply & Installation of "Ceiling Fan". The rate shall be inclusive of fixing & mounting accessories.
-
-
-
1200MM SWEEP,3 BLADE CEILING FAN.
11
-
10
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.
11
-
10
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
11
-
10
WALL MOUNTING FAN
-
-
-
Supply & Installation of "Decorative Wall-Mounted" oscillating type fan with inbuilt speed controller. The rate shall be inclusive of fixing & mounting accessories .
-
-
-
Supply of 450 MM SWEEP WALL FAN. (Havells Airboll Hi-Speed) OR CGL/GEC/POLAR SIMILAR APPROVED EQUIVALENT)
2
-
10
Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length
2
-
10
EXHAUST FAN
-
-
-
Supply & Installation of "Exhaust Fan" with louvres. The rate shall be inclusive of fixing & mounting accessories.
-
-
-
150MM VENTILATING FANS (NON-METALLIC).
23
-
10
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:
-
-
-
23 cm (9")
23
-
10
Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)
-
-
-
For 23 cm (9") Exhaust fan
23
-
10
GATE LIGHT FIXTURE
-
-
-
Supply & Fixing of the "Gate Lights" with lamp, ignitor, controlgear etc. complete. The rate shall be inclusive of fixing & mounting accessories.
-
-
-
1X25W Integral decorative LED gate light with opal acrylic with IP-65 protection. (BAJAJ BLPTSP 25W NW LED 25W LED(GLOBE) OR APPROVED EQUIVALENT)
2
-
10
Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required.
2
-
10
TOTAL BILL 17
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 20.02 SAME AS TOTAL AMOUNT OF BILL 17
1
-
-
TELEPHONE CABLE
-
-
-
Supply & Laying of "Telephone cables" with high density polyethelene insulated, solid annealed high conductivity bare copper with 0.5mm dia, paired , polyester taped and sheathed with high oxygen index fire retardent PVC compound , generally conforming to TEC specification G/WIR06/02 and ITD specifications G/WIR-06/02. May 94. The rate shall be inclusive of able end terminations also using kits,cable glands, cable lugs, etc complete.
-
-
-
Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.
1170
-
-
50PAIR UNARMOURED TELEPHONE CABLE.
1
-
-
TELEPHONE DISTRIBUTION BOX
-
-
-
50PAIR MDF KRONE MODULE WITH BOX.
1
-
10
VIOCE PORT
-
-
-
Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as required
21
-
10
LAN CABLE
-
-
-
Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.
1250
-
10
Supply of patch cord with CAT6 UTP cable of 2mtrs length including RJ45 termination at both ends.
20
-
10
Supply & fixing of patch panel conforming to CAT6 with 4-U, 32 ports
1
-
10
Supply & fixing of vertical cable manager for 4U with door
1
-
10
DATA PORT
-
-
-
Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) on existing PVC board and top cover plate on
20
-
10
CABLE TV PORT
-
-
-
Supply & Installation of "Cable TV Co-Axial Port" for TV. The rate shall be inclusive of face-plate,surrounds & MS box,crimping & fixing accessories as required.
4
-
10
CABLE TV CABLE
-
-
-
Supply & Laying of "Co-Aaxial RG 6 Cable" in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. with electrolytic grade solid bare copper conductor, gas injected physical polyethelene foam insulation,with laminated alluminuim tape and Al. wire braid, jelly flooded and PVC jacketing in black colour.
100
-
10
LAYING & FIXING POLYTHENE PIPE, MS BOXES, SWITCHES ETC.
-
-
-
Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)
-
-
-
19mm dia 3mm thick Polythene Pipe.
500
-
10
Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works
-
-
-
19 mm dia 3 mm thick polythene pipe without earth continuity wire.
500
-
10
SUPPLY & FIXING GI MODULAR BOXES, SWITCHES ETC.
-
-
-
Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
-
-
-
2 Module .
45
-
10
DUMMY CONDUIT
-
-
-
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works
-
-
-
25mm size
100
-
10
TOTAL BILL 18
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 21.03 SAME AS TOTAL AMOUNT OF BILL 18
1
-
-
LIGHTNING PROTECTION
-
-
-
S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1).
4
-
10
S & F of 4 SWG GI (Hot Dip) wire on Parapet/Roof/Plinth/ Surface of wall for lightning conductor as required (for Horizontal runs) with 40 mm long GI Staples spaced not exceeding 1300 mm apart incl. mending good all the damages to the building works.
200
-
10
S & F of 4 SWG GI (Hot Dip) wire on wall for the lightning conductor as required (for vertical run) with GI Staples (40 mm long) spaced not exceeding 1 Mtr. apart incl. mending good the damages to building works (excluding hire charges of scaffolding).
80
-
10
Making soldered joints between conductors, conductors and airterminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint
5
-
10
Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint
1
-
10
Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run
15
-
10
SCHEDULE OF RATES FOR EARTHING INSTALLATIONS
-
-
-
Excavation of soft soil for installation of Earth Electrode and filling & ramming.
12
-
10
EARTHING INSTALLATION – WITH PIPE ELECTRODE :
-
-
-
Earthing with 50 mm dia GI pipe (TATA-Medium) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.
4
-
10
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
4
-
10
Extra for treatment of soil by using salt & charcoal or coke for plate electrode.
4
-
10
TOTAL BILL 19
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 22.13 SAME AS TOTAL AMOUNT OF BILL 19
1
-
-
DG-SET INSTALLATION WORK
-
-
-
DIESEL ENGINE
-
-
-
Supply, Erection, Testing & Commissioning of outdoor sound & weather proof type "Diesel Generator-Set" with anti-vibration mounts, fitting, fixing etc. complete in all respect. The rate shall be inclusive of necessary RCC(1:1.5:3) foundation as per design consideration using M-25 grade of concrete and Fe-415 grade of reinforment steel suitable for installation of DG-set at 300mm above FGL. The DG-Set should be provided with following accessories,
1
-
10
DG-SET RATING : 125KVA
-
-
-
MAKE OF ALTERNATOR : CROMPTON GREAVES/ STAMFORD/ LEROY SOMER/ KIRLOSKAR/ CUMMINS.
-
-
-
MAKE OF ENGINE : GREAVES COTTON/ KIRLOSKAR/ CUMMINS/ VOLVO PENTA/ ASHOK LEYLAND/ MAHINDRA POWEROL/ PERKINS.
-
-
-
1500RPM,4-STROKE TURBO CHARGED AFTER COOLED DIESEL ENGINE OF SUITABLE CAPACITY & RATED BHP TO DELIVER THE SPECIFIED LOAD AT NTP COMPLETE WITH STANDARD ACCESSORIES AND SHALL CONFORMING TO ISO:3046,BS:5514.
-
-
-
THE ENGINE IS TO BE ELECTRICALLY STARTED BY AN ELECTRICALLY DRIVEN SELF STARTER OPERATED THROUGH ENGINE BATTERY.
-
-
-
ENGINE LOCAL CONTROL PANEL WITH EQUIPMENTS AND INSTRUMENTS MOUNTED ON THE ENGINE FRAME COMPLETE.
-
-
-
LEAD ACID TYPE HEAVY DUTY STARTING BATTERIES WITH SELF DRIVEN CHARGER UNIT.
-
-
-
RADIATOR OF THE ENGINE WITH SELF DRIVEN FAN AND INNER CIRCUIT WATER PUMPS COMPLETE.
-
-
-
INLET MANIFOLD AND AIR CLEANERS.
-
-
-
GEAR TYPE LUBE OIL PUMPS, LUBRICATING OIL FILTER, LUBE OIL CENTRIFUGE AND LUBRICATING OIL COOLER.
-
-
-
FUEL INJECTION SYSTEM WITH INJECTION PUMP, FUEL FILTER, FUEL PREFILTER AND NOZZLES GOVERNOR ETC.
-
-
-
THE ENGINE MOUNTED PANEL SHOULD CONSIST OF TACHO-HOUR METER, LUBE OIL PRESSURE GAUGE, COOLANT TEMPERATURE GAUGE, BATTERY CHARGER AMMETER AND OTHER ACCESSORIES ETC. COMPLETE.
-
-
-
SITC of "Auto-Mains Failure Panel". The panel shall be housed within weather proof sheet steel enclosure (IP65). The rate shall be inclusive of necessary fitting & fixing of the panel etc. complete in all respect.
1
-
10
EXHAUST SYSTEM
-
-
-
Supply & Installation of Class-A MS black exhaust pipe of suitable dia dult connected with residential type silencer. Pipe to be painted with heat resistant paint after the fabrication. The rate shall be inclusive of support arrangements, flanges, fire fly/ asbestos gaskets, hardware, glass wool and aluminium sheet cladding etc. complete.
15
-
10
EXHAUST PIPE SUPPORTING STRUCTURE
-
-
-
Supply & Fabrication of steel structure and painting with two coats of primer and two coats of approved enamel paint. The arrangement of structure shall be for individual stack.
750
-
10
TOTAL BILL 20
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 23.02 SAME AS TOTAL AMOUNT OF BILL 20
1
-
-
FIRE PROTECTION SYSTEM
-
-
-
FIRST AID FIRE EXTINGUISHER - ABC TYPE
-
-
-
Supply and Fixing of "ABC Powder Type Fire Extinguishers" shall confirm IS : 15683 & IS : 14609 with initial fill & all mounting accessories etc. complete.
-
-
-
AUTOMATIC TYPE(NITROGEN) - 5KGS CAPACITY.
5
-
10
FIRST AID FIRE EXTINGUISHER - DCP TYPE
-
-
-
Supply and Fixing of "Dry Chemical Powder Type Fire Extinguishers" shall confirm IS : 15683, IS : 4947 & IS : 4308 with initial fill & all mounting accessories etc. complete.
-
-
-
4KGS CAPACITY.
2
-
10
FIRST AID FIRE EXTINGUISHER - WATER CO2 TYPE
-
-
-
Supply and Fixing of "Water Co2 Type Fire Extinguishers" shall confirm IS : 15683 & IS : 4947 with initial fill & all mounting accessories etc. complete.
-
-
-
9LTRS CAPACITY.
3
-
10
Safety Signage
-
-
-
S.I.T.C. of Photolumi-nescence nature board and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc.
-
-
-
" EXIT " (150mm X 300mm).
14
-
10
" ARROW " (150mm X 150mm).
14
-
10
Supply,Installation,Testing & Commissioning of "Electrically Driven Centrifugal Pump" suitable for automatic/manual operation & consist of the following,
-
-
-
Horizontal, end suction, high pressure centrifugal pump, suitable for operation on 415 volts ± 6%, 3Phase, 50 Hz ± 3% A.C supply. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. (304) Shaft with mechanical seal.
-
-
-
Pump shall be suitable of 150% of its rated discharge capacity at least a head of 65% of the rated head. The shut off head should not exceed 120% of rated head.
-
-
-
Squirrel cage induction motor, suitable for operation on 415Volts, 3Phase 50Hz A.C supply for the above pump conforming to IP 55 protection & Class-F insulation. The motor shall conform IS : 1520 with flexible coupling and coupling guard etc. complete as required. Common base plate for pump and motor from M.S. Channel for required size.
-
-
-
Pump motor shall be suitable for star/delta(Hydrant pump) and DOL(Jockey Pump) starting.
-
-
-
Suitable RCC/PCC foundation with plaster and MS angle epoxy coated edging & complete with anti-vibration arrangement of cushy foot mountings. (Design and drawing to be provided by the contractor).
-
-
-
FIRE HYDRANT PUMP :Pump Capacity - 2850 LPM. Pump Head - 70Mtr. RPM - 2900.
1
-
10
JOCKEY PUMP : Pump Capacity - 180 LPM. Pump Head - 70Mtr. RPM - 2900.
1
-
10
Supply,Installation,Testing & Commissioning of "Diesel Engine Driven Fire Pump" conforming to BS : 649/ IS : 10002/ IS : 1601 & amended upto date & suitable for automatic/manual operation & consist of the following,
-
-
-
Horizontal, end suction, high pressure centrifugal pump, suitable for operation on diesel supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) shaft with mechanical seal. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side.
-
-
-
The engine rating shall be suitable to drive the pump at 150% of its rated discharge capacity at least a head of 65% of the rated head. The shut off head should not exceed 120% of rated head. The engine shall have 10% overload capacity for 1-Hour in any period of 12Hrs. continuous run.
-
-
-
Heat exchanger cooled (secondary cooling) diesel engine with automatic/ manual starting mechanism and other accessories with fuel tank of 200Liter(fabricated from 3mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 2Nos x 12Volt battery, heat exchanger with necessary piping connections & fittings, flexible coupling, coupling guard & exhaust pipe connection complete as required.
-
-
-
Common base plate for pump and motor from M.S. Channel for required size.
-
-
-
Suitable RCC/PCC foundation with plaster and MS angle epoxy coated edging & complete with anti-vibration arrangement of cushy foot mountings. (Design and drawing to be provided by the contractor).
-
-
-
DIESEL PUMP :Pump Capacity - 2850 LPM. Pump Head - 70Mtr. RPM - 1500.
1
-
10
Supply & Installation of Class-A MS black exhaust pipe of suitable dia dult connected with residential type silencer. Pipe to be painted with heat resistant paint after the fabrication. The rate shall be inclusive of support arrangements, flanges, fire fly/asbestos gaskets, hardware, glass wool and aluminium sheet cladding etc. complete.
25
-
10
Supply,Installation,Testing & Commissioning of "24V AMF Autostart Engine Panel" for diesel engine with all accessories including battery charger, wiring & control cabling etc. complete as required. The panel should consist of the following,
1
-
10
Engine to start automatically in case of low water pressure secured by the pressure switch with necessary timers, relays, etc,
-
-
-
Manual stopping,
-
-
-
Audio visual alarm for - A) Low fuel oil level, B) Engine over speed, C) High water temperature, D) Low lube oil pressure, E) Engine fails to start,
-
-
-
A battery charger with trickle/boost arrangements with secondary side tappings at 28, 30, 32, & 34Volts equipped with silicon diodes to charge the starting battery of the diesel engine.
-
-
-
MOTOR CONTROL PANEL
1
-
10
a) Designing, manufacturing, testing, supplying and erecting at site vertical floor mounting free standing/floor mounting extensible on either side, compartmentalised multitier cubical type panel board made of 14 SWG CRCA MS sheet suitable for 500/415V, 50 HZ, AC, 3 Phase and neutral system having the following features.
-
-
-
i) The panel shall be designed to ensure IP 54 degree of protection and also that the weight of the components is adequately supported without deformation or loss in alignment.
-
-
-
ii) The doors of the cubicle shall be fitted with dust protective neoprene gaskets with fasteners for proper compression of the gaskets.
-
-
-
iii) Busbars shall be of continuous rated tinned copper conforming to IS 1897 as ammended up to date adequate for specified rated continuous and short circuit current covered by proper graded colour coded heat shrinkable PVC sleeves. Busbars shall be supported by suitable hylam insulator supports. High tensile bolts and spring washers are to be provided on all busbars and suitable drilled holes for connection. The interconnections between the busbars and the circuit breakers shall be made by continuous rated tinned copper strips suitably covered by proper graded heat shrinkable colour coded PVC sleeves or by unarmoured copper cable. The earth busbar/s shall run through the length of the panel and terminated at two ends.
-
-
-
iv) All the MCCBs shall be provided with extended rotary operated mechanism. Safety interlocks are to be provided to prevent the doors of the compartments housing the MCCBs to prevent the doors to open when the MCCBs are in `ON' position.
-
-
-
v) All control wiring in the panel shall be carried out with 1.1 KV grade single core PVC insulated copper conductors of minimum 2.5 sq mm cross section for potential circuits and CT circuits. Wiring should be neatly bunched, adequately supported, properly routed and finally crimped. Wires are to be identified by numbered ferules at either end. Terminal blocks used are of clamp type with barriered terminals and are to be numbered.
-
-
-
vi) Adequate cabling space should be available in the panel with cable supports, cable alleys etc. Provision for top/bottom entry and termination of required number of A2XFY/A2X WY cable shall be provided. The position of control switches, push buttons, levers, etc requiring manual operation shall be at a height not exceeding 1850 mm from the finished floor level.
-
-
-
vii) The panel shall also comprise of necessary meters, CTs, protection MCBs fuses, indication lamps, thermal relays, contactors, auto manual switches, lifting bolts, label inscriptions (metallic engraved identification tags) describing the rating of the breakers, name of the feeders etc including all other accessories, complete as per IE Rules and regulations conforming to relevant IS and duly approved and inspected at works after manufacturing by Client/Consultant. The rate shall include necessary cutting chases and mending good damages during installation. The panel shall have the following major components.
-
-
-
1 Nos - 320A 4P (MCCB(Category - A) of rated service voltage upto 690V, Icu=36KA, Ics = 100% Icu at 415V 50 HZ, with thermo-magnetic based O/L & S/C releases including extended rotary operated mechanism, shunt trip coils. auxiliary contacts, spreaders, etc as necessary.
-
-
-
1 Sets (3 Nos each) - ON/OFF/TRIP cluster type LED indication lamps for the above MCCBs.
-
-
-
1 set. - Core Balance CT with earth fault relay.
-
-
-
1 No. - CT Operated Digital Multifunction Meter having Cl-1 accuracy and showing (A, V, F, Maximum Demand).
-
-
-
1 sets - 320A, 415V, 50 Hz, 40 mm x 10 mm for phase and 40 mm x 6 mm for neutral Aluminium Bus Bars mounted on DMC/SMC insulators covered with proper graded colour coded heat shrinkable PVC sleeves. Surge protection device with MPCB with rated KA.
-
-
-
a) 1 No - 6-32A TP MPCB with 3 Phase DOL starter with start/stop push buttons, LED Indication Lamps for ON/OFF/TRIP Indication, control fuse auto/manual selector switch, etc for DOL starting of 3 Phase motor with efficiency not less than 70% overload relays and single phasing protection.
-
-
-
b) 2 Nos - 250A TP MPCB with 3 Phase star-delta starter with start/stop push buttons, LED Indication Lamps for ON/OFF/TRIP Indication, control fuse auto/manual selector switch, etc for star-delta starting of 3 Phase motor with efficiency not less than 70% overload relays and single phasing protection.
-
-
-
c) 2 Nos - 6-32A 2P MCB of rated service voltage upto 240V, Icu=10KA, Ics = 100% Icu at 220V 50 HZ, with thermo-magnetic based O/L & S/C releases.
-
-
-
1 Set - 40 mm X 6 mm GI busbar funning along the base frame covering entire length of the panel with high tensile bolts, nuts, etc. and number of drilled holes as required for earth connection at both ends.
-
-
-
1 No.Danger Board.
-
-
-
Supply & Installation of "2500Ltrs Self Priming Tank" made of 3mm thick MS sheet and welded construction. The tank shall be connected by50mm dia pipe with delivery side of each pump(before NRV) with a stop valve. The tank shall be installed 2-3Meters above the height level pumps and shall be provided with overflow & drain connection etc. complete in all respect.
1
-
10
Supply, installation, testing and commissioning of continuous duty submersible centrifugal non-clogging drainage pumps complete with motor with all necessary protection and mechanical seal etc. complete with all ancillaries including float type level controllers, electrical control panels fabricatd from 14Gauge CRCA sheet volt meter ammeter with selector switch, MCB, CTs, phase indicating lamps protected by 2Amp SP MCB, DOL starter, necessary wiring, cable alleys, earthing, interlocking, starter with automatic float type level controller, provision of high level alarm, sequence timer, potential free contact to starter for connection to BUS, both pumps may run simultaneously at pre determind level.
1
-
10
Flow rate : 6 LPS each
-
-
-
Head : 10 Mts
-
-
-
Solid Handling : 10 – 12 MM
-
-
-
Location : Fire Pump room
-
-
-
Purpose : Dewatering of pump room
-
-
-
MOC : SS Body. SS impeller and shaft
-
-
-
Supply,Installation,Testing & Commissioning of "Air Cusion Vessel" of FRP precharged air vessel of 250mm dia, 8mm thick MS sheet, 1200mm in height for pressurization of hydrant/sprinkler system complete with adequate pressure switches with valves to operate as per operating sequences including 25mm dia drain valve, air release valve with stop cock on the top, 65mm dia inlet with isolating valve duly painted from inside and outside complete as required. The vessel should be suitable of working pressure of 15Kg/Sqcm including synthetic enamel paint over a coat of primer.
1
-
10
Supply & Fixing of "CI Foot Valve Swing Type" shall confirm IS : 4038, Grade PN-0.2 with srainer, flanges, unions, pad locking arrangement etc. complete.
-
-
-
200mm Dia.
3
-
10
80mm Dia.
2
-
10
Supply & Fixing of "CI Flanged End Type Y- Strainer " shall confirm IS : 12785 with flanges, unions, pad locking arrangement etc. complete.
-
-
-
200mm Dia.
1
-
10
Supply & Fixing of "CI Screwed End Type Gate Valve" shall confirm IS : 14846, Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
200mm Dia.
10
-
10
150mm Dia.
8
-
10
80mm Dia.
10
-
10
Supply & Fixing of "CI Wafer Type Butterfly Valve " shall confirm IS : 13095 & API 609/ EN 593 (BS 5155), Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
100mm Dia.
5
-
10
65mm Dia.
5
-
10
Supply & Fixing of "CI Swing Check Type Reflux (NRV)" shall confirm IS : 5312, Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
150mm Dia.
5
-
10
80mm Dia.
3
-
10
Supply & Fixing of "G.M. Ball Valve" shall confirm IS : 9890 & EN ISO 17292/BS 5351, Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
50mm Dia.
5
-
10
25mm Dia.
14
-
10
Supply & Fixing of "Dial Type (100mm) Pressure Gauge" with isolation ball valve suitable for working pressure of 250PSI. Rate shall be inclusive of short pieces, nipples, elbows etc complete.
4
-
10
Supply & Fixing of "Bellow Type Pressure Switch" with differential 0-10Kg/Sqcm including controlling cock, damper and adopter etc. complete.
3
-
10
Supply & Erection of "4-Way S.S. Draw-Out Type Fire Brigade Suction Hose" shall confirm IS : 902 with female coupling & with 150mm dia MS suction pipe and foot valve to be connected with static tank. The rate shall be inclusive of foot valve & mild steel vertical cabinet with glass fronted door to mount the manifold. (FOR DRAW-OUT WATER FROM UGR)
1
-
10
Supply & Erection of "4-Way S.S. Fire Service Inlet Breeching" shall confirm IS : 903 with 63mm dia instantaneous inlets & fitted with non return valves, 25mm dia gun metal drain cock, blank cap, brass chains and 150mm dia flanges suitable for local fire tender complete. The rate shall be inclusive of mild steel vertical cabinet with glass fronted door to mount the manifold. (FOR FILLING THE YARD FROM EXTERNAL SOURCES)
1
-
10
Supply of 1.1KV 4Cx16sqmm XLPE Armoured Al. cable as directed by EIC.
100
-
10
Supply of 1.1KV 3.5Cx150sqmm XLPE Armoured Al. cable as directed by EIC.
150
-
10
Supply of 1.1KV 10Cx1.5sqmm XLPE Armoured CU. cable as directed by EIC.
500
-
10
Supply of 1.1KV 16Cx1.5sqmm XLPE Armoured CU. cable as directed by EIC.
200
-
10
Supply of 1.1KV 2Cx2.5sqmm XLPE Armoured CU. cable as directed by EIC.
150
-
10
Supply of 1.1KV 12Cx2.5sqmm XLPE Armoured CU. cable as directed by EIC.
125
-
10
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
-
-
-
For 4 core
-
-
-
upto 16 sqmm.
2
-
10
For 3½ core
-
-
-
upto 150 sqmm.
2
-
10
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
-
-
-
4 core 16 sqmm cable.
2
-
10
3½ core 150 sqmm cable.
2
-
10
LAYING OF XLPE/PVC INSULATED AND ARMOURED CABLES
-
-
-
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
25
-
10
Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting
25
-
10
Supply & Laying of "MS Black ERW Pipe" shall confirm IS : 1239 up to 150mm dia and IS : 3589 above 150mm Dia. The quoted rate shall also include the neceesary excavation work, civil work for supporting arrangements and providing concrete anchor blocks at all change in direction of pipeline & also near joints and protection against soil corrosion by dobule coats of coal tar enamel & duoble wraps of 4mm thick reinforced fibre glass shall confirm IS : 10221. Rate shall be inclusive of all fittings like radius bends, tees, reducers, flanges, rubber gaskets, nuts, bolts, washers & welding etc. complete in all respect.
-
-
-
M.S.ERW PIPE(HEAVY CLASS)
-
-
-
200mm Dia. (C-Class, Heavy Quality,6.3mm thick)
250
-
10
Supply & Laying of "MS Black ERW Pipe" shall confirm IS : 1239 up to 150mm dia and IS : 3589 above 150mm Dia. The quoted rate shall also include necessary hanger & clamp support arrangment for fixing on the wall or suspend from the ceiling/truss and painting with single coat of zinc chromate primer & two coats of synthetic enamel paint & welding etc. complete in all respect.
-
-
-
M.S.ERW PIPE(HEAVY CLASS)
-
-
-
200mm Dia. (C-Class, Heavy Quality,6.3mm thick)
10
-
10
M.S.ERW PIPE(MEDIUM CLASS)
-
-
-
150mm Dia. (B-Class, Medium Quality,4.8mm thick)
150
-
10
80mm Dia. (B-Class, Medium Quality,4.0mm thick)
150
-
10
50mm Dia. (B-Class, Medium Quality,3.6mm thick)
100
-
10
25mm Dia. (B-Class, Medium Quality,3.2mm thick)
125
-
10
Construction of "Brick Masonary Valve Chamber" (1.2X1.2Mtr inside upto 1.5Mtr. depth) with first class bricks masonry in cement mortar 1:6 &12mm thick plaster on inside with a floating coat of neat cement & rough plaster on external faces with cement mortar 1:4 including providing R.C.C. top slab complete in all respect. The rate shall be inclusive of excavation, shoring, dewatering, support to valve and access rungs etc. complete in all respect.
6
-
10
Supply and Fixing of "63mm dia S.S. Single Headed Hydrant Valve" with flanged inlet, brass spindle controlled 63mm dia female instantaneous outlet type, G.M. coupling, blank cap, chain, twist release type lug & all accessories shall confirm IS : 5290. The rate shall be inclusive of fixing 80mm dia MS bend & MS stand pipe (1M below+1M above) etc. complete and protection against soil corrosion by two wraps of 4mm thick reinforced fibre glass shall confirm IS : 10221 for underground portion of pipe.
20
-
10
Supply of "Non-Perlocating Rubber Reinforced Lined Fire Hose Pipe" shall confirm IS : 636 & IS : 8423 of 63 mm dia and 15m length suitable for for brust pressure of 35.7 Kg/Sqcm. Hose shall be complete with ISI marked S.S male & female coupling (IS : 903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire etc complete.
30
-
10
Supply of instantaneous pattern "63mm dia S.S. Short Branch Pipe" with 20mm dia hexagonal nozzle shall confirm IS : 2871 suitable for inter connection to hose pipe coupling.
20
-
10
Supply and Fixing of "Fire Hose Cabinet" fabricated from 16G MS sheet with full front 2mm glass door and locking arrangement duly painted fire red confirming IS : 5 and suitably mounted on wall for internal or with support arrangement for outdoor as required.
20
-
10
Supply & Fixing of "CI Screwed End Type Gate Valve" shall confirm IS : 14846, Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
200mm Dia.
5
-
10
Supply & Fixing of "CI Wafer Type Butterfly Valve " shall confirm IS : 13095 & API 609/ EN 593 (BS 5155), Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
80mm Dia.
20
-
10
Supply & Fixing of "CI Swing Check Type Reflux (NRV)" shall confirm IS : 5312, Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
80mm Dia.
20
-
10
Supply & Fixing of "G.M. Ball Valve" shall confirm IS : 9890 & EN ISO 17292/BS 5351, Grade PN-1.0 with flanges, unions etc. complete.
-
-
-
25mm Dia.
20
-
10
Supply & Fixing of "Single Acting Air Release Valve" shall confirm IS : 14845 for Sprinkler/Wet Riser system with ball valve, flanges, union etc. complete.
-
-
-
25MM DIA.
1
-
10
Supply & Fixing of "20 mm Dia Swinging Type First Aid Hose Reel" shall confirm to IS : 884 with 30Mtr long eavy duty rubber water hose rolled on red colour drum with stop cock, coupling & nozzle of 6.35mm outlet with shut off valve with MS socket for tap-off. The rate shall be inclusive of brackets for fixing on wall with anchor fastner, bolts & nuts etc. complete as required.
3
-
10
Supply & Installation of 1.0KVA(600Watt) UPS for 60minutes battery backup for FACP.
1
-
10
Supply & Installation of "Combined Transmitter and Reciver Beam Detector" etc. complete. The rate shall be inclusive of fixing & mounting accessories.
2
-
10
Supply & Installation of "Monitor Module" with accessories etc complete.
5
-
10
Supply & Installation of "Control Relay Module" with accessories etc complete.
5
-
10
Supply & Installation of "Manual Call Points" complete. The rate shall be inclusive of fixing & mounting accessories.
2
-
10
TOTAL BILL 21
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 25.34 SAME AS TOTAL AMOUNT OF BILL 21
1
-
-
HVAC
-
-
-
Supply, installation, testing & commissioning of Hi-wall split type 3 star Air-conditioning machine with 1st charge R-410a refrigerent gas hermetic/ semihermetic type rotary compressor including cordless remote, copper coils of condensing & evaporating units, MS structure for ODUs, vibration isolation pads for ODUs, Armflexd insulated copper piping (suction + liquid) and control cabling for IDU ODU connection, 32 mm dia hard drawn pipe with armflex insulation for sweat water drain line including wall cutting (brick/concrete), mending good as required.
-
-
-
1.5 TR
12
-
10
TOTAL BILL 22
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 26.03 SAME AS TOTAL AMOUNT OF BILL 22
1
-
-
VIDEO CONFERENCE SYSTEM
-
-
-
Supply, installation, testing and commissioning of MCU IP 30 HD, up to 720p(incomming) port resource, H.264 video support up to 4 Mpbs, configured and licensed sustem with Firewall security protection, advanced data sharing capability, inputs for VGA, Audio and USB and as per technical specification.
1
-
10
Supply, installation, testing and commissioning of Pan-Tilt-Zoom (PTZ) camera having Pan-Tilt renge ± 100 degree, focal length 3.1 mm to 31 mm, zoom range 10x(optical), 40x(digital) picture 1/4, colour codec and HD codec including mounting arragement and as per technical specification.
3
-
10
Supply, installation, testing and commissioning of professional display unit with 42" LED screen, resolution 1920x1080 (16:9), brightnsss - 700 cd/sqm, contrast ratio- 3000:1, built-in 2x10 w speaker, wall mounting brackets and as per technical specification.
3
-
10
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.
-
-
-
25mm size
45
-
10
Supplying and drawing CAT-6 UTP cable in prelaid PVC conduit including RJ-45 termination.
75
-
10
TOTAL BILL 23
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 27.07 SAME AS TOTAL AMOUNT OF BILL 23
1
-
-
Elevator (Lift)
-
-
-
Supplying installation, testing and
commissioning of 8 passenger 680 Kg }/ lifts
having contract speed of 1 MPS serving
different floors in the lift shaft as per detailed
specification enclosed and as under:
1. No. of Elevators- 1No.
2. Type- Passenger Elevator
3. Capacity Passenger- 8 Persons - 680 Kg.
4. Speed- 1.0 Metre/Sec (approx.}
5. Type of Drive- Variable Voltage.
Variable Frequency Drive with Microprocessor based Full Collective Control.
-
-
-
6. Location of Machine Room- No machine room
7. Available Travel- 11.7 Metres.
8. Serving- Ground Floor to 2nd Floor 06 Stops, 03 Levels, 03 Openings
9. Well Size (Required}
2000 mm Wide X 1825 mm Deep (Finished)
10. Power Supply-
415 V three-phase 50 cycles alternating current
11. Auxiliary Required-
Single-phase 220 V 50 cycles alternating current
12. Car Size (Clear Inside) 1350 mm Wide x 1300 mm Deep X 2300 mm Height. 13. Required Pit Depth- 1600 mm (mandatory)
14. Required Head Room- 4800 mm
15. Car Enclosure- Stainless Steel Car
16. Flooring-Granite Flooring by Customer-25 mm recess 17. Electric light : CFL
18. Fan- Cross Flow Fan
-
-
-
19. No. of Entrances One Location - Front
20.Car Entrance- Automatic Centre Opening Power Operated Stainless steel
without Vision Panel
21. Landing Entrance
Automatic Centre Opening Power Operated Stainless steel
without Vision Panel
22. Clear Opening
800 mm Wide x 2100 mm High
23 . Indicators. Direction & Position Indicator
24 Other Features
Battery Operated Emergency Alarm & Light.
Call Registration LEDs.
OSG Electronic Switch.
Pit Ladder and Balustrade Assembly Opening, Lift Announcement System
Full Height Infra red light Curtain Door Safety.
Fire Man’s Drive, 3-way Intercom , 1 hour Fire Resistance. Rescue Drive & Load Weighting Drive
1
-
10
TOTAL BILL 24
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 28.04 SAME AS TOTAL AMOUNT OF BILL 24
1
-
-
SURVEILLANCE SYSTEM
-
-
-
DIGITAL VIDEO RECORDER
-
-
-
Supply of "Digital Video recorder" with 16-Channel video & audio MPEG4 real time recording@25~400fps & H.264 data compression, HDD 2 HDD supports max 4TB each, VGA & video-out, HDMI, GUI: 16 bit true color translucent graphic menu user friendly interface, simultaneous network access via Ethernet and CF Card Back-up.
1
-
10
CAMERA
-
-
-
Supply of "Indoor IR Mini Dome Camera" with discreet and tamper-resistant casing, image sensor 1/3'' color CMOS HD, varifocal 2.8-11mm lens, resolution 600-850TVL, min. illumination 0Lux (IR ON), IR/Array 12~24PCS, IR distance 15~20m, S/N Ratio 50-60dB (AGC OFF), electronic shutter 1/25~1/15,000sec, operating temperature -10 to 50 degrees & individually configurable.
6
-
10
Supply of "Outdoor Mini Bullet Camera" with IP66 weather proof rating & vandal proof casing, image sensor 1/3'' color CMOS HD, varifocal 2.8~11mm lens, resolution 1.3MP, min. illumination 0Lux (IR ON), IR/Array 2~30PCS, IR distance 30~40m, S/N Ratio 50-60dB (AGC OFF), electronic shutter 1/25~1/15,000sec, operating temperature -10 to 50 degrees & individually configurable.
4
-
10
DATA STORAGE & MONITOR
-
-
-
SUPPLY OF 2TB HDD FOR BACKUP STORAGE.
1
-
10
SUPPLY OF 24-INCH LED TV.
1
-
10
ACCESSORIES, CABLES & CONDUITS
-
-
-
Supply & Laying of "Co-Axial Cable" with electrolytic grade solid annedaled copper conductor, foam dielectric insulation,Al. foiled tapped and Al. braid wire,jelly flooded and PVC jacketing.
-
-
-
CCTV CABLE - 4+1.(VIDEO DATA, POWER & CONTROL SINGNALS)
300
-
10
12V/24V DC CCTV POWER SUPPLY ADAPTOR (1/2/3/4/5/8AMP).
10
-
10
Supply & Installation of 1KVA UPS for 60minutes battery backup.
1
-
10
DUMMY CONDUIT
-
-
-
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works
-
-
-
25mm size
280
-
10
CCTV SYSTEM INSTALLATION
-
-
-
Installation charges of surveillance system with all allied accessories required asper site condition.
1
-
10
TOTAL BILL 25
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 29.19 SAME AS TOTAL AMOUNT OF BILL 25
1
-
-
Solar Compound Lighting
-
-
-
Supplying, fitting, fixing, installation and Commissioning of 200 WP- Poly Crystalline PV Module, DC LED lamp with inbuilt charge controller of 40 W, AC (85 ~ 265 V) - Frequency (50- 60 Hz)/ DC (12 V, 24V). GI Streetlight pole & module mounting structure of reputed make, Solar tubular battery : 12 V - 75 Ah - 2 Nos, Electrical BOS- DC & AC cables, connectors
15
-
10
TOTAL BILL 26
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 30.02 SAME AS TOTAL AMOUNT OF BILL 26
1
-
-
Solar Water Heater
-
-
-
Supplying, fitting, fixing, installation and Commissioning of 500 LPD ETC Solar Water Heater having Inner water tank of material CRCA sheet with Non-Stick coating, Outer Tank made of Galvanized Pre Coated, n between inner tank & outer cover insulated with PUF insulation, Evacuated Tubes: Super hard Borax and Silica, Materials of glass: Concentrated borosilicate glass, Tube outer diameter: 58mm, Tube inner diameter: 48mm, Tube Length: 1800mm, No. of tubes: 50, Tank Volume: 500 Litre, Temperature: 60 to 80 degree C. depending upon the intensity of the Sun, Tank Insulation: PUF 50mm (Polyurethane foaming), Stand frame: Mild Steel Powder coated, Electrical Back Up: 4 KW each up to 500 LPD.
2
-
10
TOTAL BILL 27
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 31.02 SAME AS TOTAL AMOUNT OF BILL 27
1
-
-
Public Adress Systerm
-
-
-
Wall Speaker: Frequency range (-10dB) : 100Hz - 20kHz , Nominal coverage : H( 110) X V (110 ) , Components : 4"(100mm) cone driver , 1"(25mm) balanced dome tweeter , Power rating : PGM 30W , Nominal impedance : 8Ω / 15W, 7.5W, 3.8W , SPL : 106dB SPL (60W)
18
-
10
Mixer amplifier: Mixer amplifier. 250 watt. 3 x dual bal mic/line inputs. 230 VAC
1
-
10
Gooseneck Mic: Gooseneck Length: 18 inch (45.7 cm) lengths, Interchangeable cartridges provide the right polar pattern for every application, Locking flange mount for permanently securing microphone to surfaces
Snap-fit foam windscreen, Shock mount provides over 20 dB isolation from surface vibration noise, with base
1
-
10
DVD Player
1
-
10
1.5sqmm Speaker wire - in MTR
200
-
10
6u wall mount Equipment Rack
1
-
10
Installation Labour - for fixing, testing & commissioning all equipments including materials & labour for speaker wiring
1
-
10
TOTAL BILL 28
BIDDER MUST QUOTE RATE IN BASIC RATE FOR SL No. 32.08 SAME AS TOTAL AMOUNT OF BILL 28
1
-
-
SUMMARY
BIDDER MUST QOUTE RATE IN BASIC RATE FOR SL No. 33.01,33.02,33.03,33.04,33.05,33.06,33.07,33.08,33.09,33.10,33.11,33.12,33.13,33.14,33.15,33.16,33.17,33.18,33.19,33.20,33.21,33.22,33.23,33.24,33.25,33.26,33.27,33.28 SAME AS TOTAL AMOUNT CORRESPONDING TO THAT SL. No.
-
-
-
Bill 1 - Land Development
1
-
-
Bill 2 - Admin Building
1
-
-
Bill 3 - Furniture Works
1
-
-
Bill 4 - Boundary wall
1
-
-
Bill 5 - Gate
1
-
-
Bill 6 - Guard Room
1
-
-
Bill 7 - Covered Garage
1
-
-
Bill 8 - DG Platform
1
-
-
Bill 9 - Parking & Walkway
1
-
-
Bill 10 - Storm Water Drain
1
-
-
Bill 11 - Rain Water Harvesting
1
-
-
Bill 12 - Underground Reservoir
1
-
-
Bill 13 - Landscaping Work
1
-
-
Bill 14 - Sanitary & Plumbing Works
1
-
-
Bill 15 - Tubewell
1
-
-
Bill 16 - Medium Voltage Switch Board
1
-
-
Bill 17 - Internal Electrification Work
1
-
-
Bill 18 - Telephone Cable
1
-
-
Bill 19 - Lightning Protection
1
-
-
Bill 20 - DG-Set Installation Work
1
-
-
Bill 21 - Fire Protection System
1
-
-
Bill 22 - HVAC
1
-
-
Bill 23 - Video Conference System
1
-
-
Bill 24 - Elevator (Lift)
1
-
-
Bill 25 - Surveillance System
1
-
-
Bill 26 - Solar Compound Lighting
1
-
-
Bill 27 - Solar Water Heater
1
-
-
Bill 28 - Public Adress Systerm
1
-
-
DISCOUNT OFFERED ON CIVIL WORKS IF ANY(AMOUNT IN RS.)
1
-
10
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements