West Bengal State Police Housing Corporation Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Police Housing Corporation Limited Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Dec 2024
Closing Date18 Jan 2025
Tender Amount₹ 1,20,33,010
Costs
EMD
₹ 2,40,660Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WBSPH_789994_1Bid Award Id
ViewTender No
WBPHIDCL/ACE/NIT- 245(e)/2024-2025Tender Authority
West Bengal State Police Housing Corporation Limited ViewPurchaser Address
-Website
http://wbtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.
(b) 50 mm thick interlocking designer concrete paver block M- 30 grade for non-traffic zone,buiding premises,garden,parks, domestic drive as per IS: 15658- 2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.)
Coloured Decorative
190.06
1332
253241.65
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
325
386
125495.5
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
50.86
803
40854.31
... More
Brick work with 1st class bricks in cement mortar (1:4)(a) In foundation and plinth
32.47
6163
200144.76
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.(a) upto 150 mm. Thick
15.41
1119
17245.33
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
Without integrated grills.
(a) Fixed type steel windows as per IS sizes with horizontal glazing bars.
(A) AT GROUND FLOOR
5.48
1797
9848.82
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of
workmanship)
Without integrated grills.
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
(A) AT GROUND FLOOR
41.16
2620
107870.89
... More
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed
65.55
22
1484.05
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
(ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster
(A) AT GROUND FLOOR
712.16
150
106945.07
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
(ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster
(B) AT FIRST FLOOR
635.15
154
98410.14
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
(ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster
(C) AT SECOND FLOOR
235.15
159
37553.46
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
(ii) c/ With 1:4 cement mortar ,b) 10 mm thick plaster. Ceiling Plaster
(D) AT THIRD FLOOR & MUMTY
604.04
164
99346.46
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:4 cement mortar b) 15mm thick plaster INSIDE
(A) AT GROUND FLOOR
1922.07
187
359638.52
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:4 cement mortar b) 15mm thick plaster INSIDE
(B) AT FIRST FLOOR
464.72
191
89170.47
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:4 cement mortar b) 15mm thick plaster INSIDE
(C) AT SECOND FLOOR
294.72
196
57956.69
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:4 cement mortar b) 15mm thick plaster INSIDE
(D) AT THIRD FLOOR & MUMTY
376.08
201
75746.27
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:6 cement mortar a) 20mm thick plaster OUTSIDE
(A) AT GROUND FLOOR
1715.7
191
329208.52
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:6 cement mortar a) 20mm thick plaster OUTSIDE
(B) AT FIRST FLOOR
900
196
176985
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:6 cement mortar a) 20mm thick plaster OUTSIDE
(C) AT SECOND FLOOR
820
201
165156.2
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface.
With 1:6 cement mortar a) 20mm thick plaster OUTSIDE
(D) AT THIRD FLOOR & MUMTY
575
206
118553.5
... More
Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.
524
48
25602.64
... More
Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).
15
368
5524.05
... More
Cement concrete (1:1.5:3) with graded stone chips 5.6 mm sizewith hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. a) 20 mm thick
a) 20 mm thick
54
579
31277.34
... More
Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.
866.7
40
35118.68
... More
(b)Rendering the Surface of walls and ceiling with White Cement base wall putty of approved make & brand.(1.5 mm thick)
(A) AT GROUND FLOOR
50
131
6555
... More
(b)Rendering the Surface of walls and ceiling with White Cement base wall putty of approved make & brand.(1.5 mm thick)
(B) AT FIRST FLOOR
50
131
6555
... More
(b)Rendering the Surface of walls and ceiling with White Cement base wall putty of approved make & brand.(1.5 mm thick)
(C) AT SECOND FLOOR
50
131
6555
... More
(b)Rendering the Surface of walls and ceiling with White Cement base wall putty of approved make & brand.(1.5 mm thick)
(D) AT THIRD FLOOR & MUMTY
50
131
6555
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. ii) Solvent based interior grade Acrylic Primer,(b) Two Coats
(A) AT GROUND FLOOR
610.79
57
35303.66
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. ii) Solvent based interior grade Acrylic Primer,(b) Two Coats
(B) AT FIRST FLOOR
548.49
57
31702.72
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. ii) Solvent based interior grade Acrylic Primer,(b) Two Coats
(C) AT SECOND FLOOR
612.38
57
35395.56
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. ii) Solvent based interior grade Acrylic Primer,(b) Two Coats
(D) AT THIRD FLOOR & MUMTY
250
57
14450
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)
i) Standard Quality (Two coats)
(A) AT GROUND FLOOR
610.79
73
45131.27
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)
i) Standard Quality (Two coats)
(B) AT FIRST FLOOR
548.49
73
40527.93
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)
i) Standard Quality (Two coats)
(C) AT SECOND FLOOR
612.38
73
45248.76
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)
i) Standard Quality (Two coats)
(D) AT THIRD FLOOR & MUMTY
250
73
18472.5
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.[This item to be done under specific instruction of the Superintending Engineer]
(b) Two Coats
(A) AT GROUND FLOOR
2099.52
53
112849.2
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.[This item to be done under specific instruction of the Superintending Engineer]
(b) Two Coats
(B) AT FIRST FLOOR
1318.6
54
71995.56
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.[This item to be done under specific instruction of the Superintending Engineer]
(b) Two Coats
(C) AT SECOND FLOOR
1318.6
55
73103.18
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.[This item to be done under specific instruction of the Superintending Engineer]
(b) Two Coats
(D) AT THIRD FLOOR & MUMTY
1038.96
56
58483.06
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. The items to be selected only with written permission of Superintending Engineer for very resticted and small areas of a building b) Premium 100% Acrylic Emulsion
(A) AT GROUND FLOOR
2469.24
100
247195.62
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. The items to be selected only with written permission of Superintending Engineer for very resticted and small areas of a building b) Premium 100% Acrylic Emulsion
(B) AT FIRST FLOOR
1593.43
100
160856.76
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. The items to be selected only with written permission of Superintending Engineer for very resticted and small areas of a building b) Premium 100% Acrylic Emulsion
(C) AT SECOND FLOOR
1593.43
101
162227.11
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. The items to be selected only with written permission of Superintending Engineer for very resticted and small areas of a building b) Premium 100% Acrylic Emulsion
(D) AT THIRD FLOOR & MUMTY
1131.98
102
116197.75
... More
Painting with ready mixed red lead paint of approved make and brand : (a) Two coat
(A) AT GROUND FLOOR
168.2
65
11025.51
... More
Painting with ready mixed red lead paint of approved make and brand : (a) Two coat
(B) AT FIRST FLOOR
86.6
65
5676.63
... More
Painting with ready mixed red lead paint of approved make and brand : (a) Two coat
(C) AT SECOND FLOOR
86.6
65
5676.63
... More
Painting with ready mixed red lead paint of approved make and brand : (a) Two coat
(D) AT THIRD FLOOR & MUMTY
35.62
65
2334.89
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary .
On Steel and other Metal Surface .Two coat with any shade except white.With super gloss (hi-gloss) -
(A) AT GROUND FLOOR
168.2
94
15836.03
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary .
On Steel and other Metal Surface .Two coat with any shade except white.With super gloss (hi-gloss) -
(B) AT FIRST FLOOR
86.6
94
8153.39
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary .
On Steel and other Metal Surface .Two coat with any shade except white.With super gloss (hi-gloss) -
(C) AT SECOND FLOOR
86.6
94
8153.39
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary .
On Steel and other Metal Surface .Two coat with any shade except white.With super gloss (hi-gloss) -
(D) AT THIRD FLOOR & MUMTY
35.62
94
3353.62
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(A) AT GROUND FLOOR
228.68
45
10356.92
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(B) AT FIRST FLOOR
100
45
4529
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(C) AT SECOND FLOOR
102
45
4619.58
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
(D) AT THIRD FLOOR & MUMTY
151
45
6838.79
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface.
With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
(A) AT GROUND FLOOR
228.68
96
22076.77
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface.
With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
(B) AT FIRST FLOOR
100
96
9654
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface.
With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
(C) AT SECOND FLOOR
102
96
9847.08
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface.
With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)
(D) AT THIRD FLOOR & MUMTY
150
96
14481
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
(A) AT GROUND FLOOR
350
1206
422135
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
(B) AT FIRST FLOOR
250
1220
305100
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
(C) AT SECOND FLOOR
250
1234
308675
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
(D) AT THIRD FLOOR & MUMTY
250
1249
312252.5
... More
Extra cost of labour for pre finish and pre moulded nosing to treads of steps,railing,window sil etc of kota stone.
96
266
25628.16
... More
Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shadeincluding grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]
(A) AT GROUND FLOOR
107.2
1370
146925.1
... More
Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shadeincluding grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]
(B) AT FIRST FLOOR
47.7
1384
66058.3
... More
Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shadeincluding grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]
(C) AT SECOND FLOOR
47.7
1399
66740.41
... More
Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shadeincluding grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]
(D) AT THIRD FLOOR & MUMTY
30.7
1413
43393.53
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
(A) AT GROUND FLOOR
10
880
8807.4
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
(B) AT FIRST FLOOR
10
886
8867
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
(C) AT SECOND FLOOR
10
892
8926.6
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
(D) AT THIRD FLOOR & MUMTY
10
898
8986.1
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white
(A) AT GROUND FLOOR
289.5
831
240829.26
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white
(B) AT FIRST FLOOR
170
837
142431.1
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white
(C) AT SECOND FLOOR
163.25
843
137748.72
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white
(D) AT THIRD FLOOR & MUMTY
110
849
93473.6
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. .(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(ii) Other than Coloured decorative including white
(A) AT GROUND FLOOR
328.57
837
275285.8
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. .(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(ii) Other than Coloured decorative including white
(B) AT FIRST FLOOR
294
843
248074.26
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. .(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(ii) Other than Coloured decorative including white
(C) AT SECOND FLOOR
268.44
849
228109.57
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. .(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile upto 0.09 Sq.m
(ii) Other than Coloured decorative including white
(D) AT THIRD FLOOR & MUMTY
268.44
855
229706.79
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backingcourse) laid after application slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be supplied by the contra conc (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.
(B) Light Colour
(A) AT GROUND FLOOR
50
1512
75619.5
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backingcourse) laid after application slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be supplied by the contra conc (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.
(B) Light Colour
(B) AT FIRST FLOOR
50
1518
75917.5
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backingcourse) laid after application slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be supplied by the contra conc (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.
(B) Light Colour
(C) AT SECOND FLOOR & MUMTY
50
1524
76215.5
... More
Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.(a) Slab Thickness 20 to 25 mm
(A) AT GROUND FLOOR
5
766
3831.65
... More
Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.(a) Slab Thickness 20 to 25 mm
(B) AT FIRST FLOOR
5
780
3903.15
... More
Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.(a) Slab Thickness 20 to 25 mm
(C) AT SECOND FLOOR & MUMTY
5
794
3974.65
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
(A) AT GROUND FLOOR
0.25
97651
24412.83
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
(B) AT FIRST FLOOR
0.25
97889
24472.42
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
(C) AT SECOND FLOOR
0.25
98128
24532.01
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Siliguri.
(D) AT THIRD FLOOR
0.25
98366
24591.6
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr
(A) AT GROUND FLOOR
6.62
11943
79062.86
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(ii) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr
(B) AT FIRST FLOOR
2
12062
24124.92
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(ii) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr
(C) AT SECOND FLOOR
2
12183
24366.16
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(ii) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr
(D) AT THIRD FLOOR
1.5
12304
18457.37
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal / Round rod) (v) 125 mm grip x 12 mm dia rod.
18
122
2209.5
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately). 40mm X 6mm, 250mm Length
100
34
3456
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark 100mm X 50mm X 1.25mm
100
51
5125
... More
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 250mm long.
50
189
9475
... More
Door stopper.(Brass)
5
139
697.2
... More
Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete
4
2328
9315.08
... More
Anodised aluminium barrel / tower /socket bolt (full covered) of approved manufractured from extructed section conforming to I.S. 204/74 fitted with cadmium plated screws.
200mm long x 10mm dia. bolt.
94
92
8738.24
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass.
194.76
557
108629.34
... More
Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts) , reassembling and refitting and rehanging same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item, payment under item 73 will be made once only).
70
150
10511.9
... More
Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats
5
451
2258.45
... More
Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.
38.06
20
771.1
... More
Renewing 125mm long wooden buffer block
210
64
13513.5
... More
Labour for dismantling G.I. pipe with fittings.
(ix) 100 mm
241.8
13
3170
... More
Dismantling wash basin with brackets with or without waste fittings.
5
41
208.55
... More
Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete
36
53
1930.68
... More
Dismantling E.P. or Anglo-Indian W.C.
4
53
214.52
... More
Dismantling urinal.
16
39
629.28
... More
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
(i) 580 mm X 440 mm
36
1922
69205.68
... More
Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made
(a) For Exposed Work -- PVC Pipes (Dia)
40 mm
155
348
53941.55
... More
Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made
(a) For Exposed Work -- PVC Pipes (Dia)
32 mm
180
281
50626.8
... More
Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made
(a) For Exposed Work -- PVC Pipes (Dia)
25 mm
110
210
23204.5
... More
Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made
(a) For Concealed work
15 mm
5
163
816.35
... More
Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made
(a) For Concealed work)
20 mm
5
188
941.5
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
40mm mm dia
6
1961
11770.26
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
32 mm mm dia
16
1499
23988.48
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
25 mm mm dia
12
1086
13043.04
... More
Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Mtr. Length
b) 110 mm
149.8
348
52131.9
... More
Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992
(B) Fittings (110 MM)
(ii) Door Tee
59
232
13711.6
... More
Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992
(B) Fittings (110 MM)
(iv) Door Bend T.S
17
175
2978.4
... More
Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992
(B) Fittings (110 MM)
(v) Plain Tee
30
101
3039
... More
Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992
(B) Fittings (110 MM)
(vii) Pipe Clip
77
25
1927.31
... More
Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992
(B) Fittings (110 MM)
(vii) Vent Cowl
2
39
78.66
... More
Labour for fitting and fixing U.P.V.C pipes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials)
(A) Above ground
(ii) 110 mm
49.8
67
3382.91
... More
Labour for fitting and fixing U.P.V.C pipes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials)
(B) Below Ground
(ii) 110 mm
100
100
10011
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 3950 mm X 420 mm
16
3419
54708.32
... More
Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect.
2
1349
2698.24
... More
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.
Hindware/Parryware/Cera, made (a) With 'S' trap
4
3917
15669.76
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.White
5
1209
6048.4
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete.
(b) Anglo Indian (ii) Plastic (hallow type) white
5
578
2890.1
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (ii) 630 mm X 550 mm X 180 mm
2
4514
9029.08
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 32 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(iii) 630 mm X 450 mm size
1
3885
3885.27
... More
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
1
1784
1784.13
... More
Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with coupling at one end fitted with necessary clamps. 1050 mm long
34
108
3687.3
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
(iii) 600 mm long
37
127
4718.24
... More
Supplying, fitting and fixing pillar cock of approved make.
a) (ii) CP Pillar Cock Super Deluxe with Aerator - 15 mm. (Equivalent to Code No. 508 & Model No. Tropical / Sumthing Special of ESSCO or similar brand).
2
705
1411.1
... More
Supplying, fitting and fixing towel rail with two brackets. (a) (ii)C.P. over brass (iii) 25 mm dia. and 750 mm long
5
566
2830.55
... More
Supplying, fitting and fixing liquid soap container.(c) Fibre glass.
5
224
1120.3
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
2
730
1461.16
... More
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).
5
1026
5130.7
... More
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
2
971
1942.64
... More
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).).
2
2848
5696.8
... More
Supplying, fitting and fixing shower of approved brand and make.
Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
37
538
19931.53
... More
Supplying, fitting and fixing C.I. round grating. (ii) 150 mm
34
101
3444.2
... More
Supplying, fitting and fixing C.I. square jalli. (ii) 150 mm
20
121
2431.2
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (f) 2000 litre capacity
5
12435
62176.2
... More
Labour for hoisting plastic water storage tank. (f) 2000 litre capacity (a) Upto 1st story from G.L.
5
183
917.65
... More
Galvanised iron sheet ridging fitted with necessary bolts,
screws, washers etc complete.(225mm end lapping)
(A) 300 mm lapping each way
(a) With 0.60 mm sheet
120
436
52344
... More
Galvanised iron sheet eaves gutter fitted and fixed with
necessary 50 mm X 6 mm M.S flat bar clamps bent to design,
bolts, nuts, washers etc. complete. Eaves gutter made of 0.63
mm. sheets.(300mm End lapping)
(a) 225 mm. wide gutter
350
407
142660
... More
Supplying, fitting and fixing bib cock or stop cock.
PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm
52
183
9543.56
... More
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side)
as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
116.75
332
38820.54
... More
Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. PVC Door Shutter-30 mm thick:
33.5
2534
84921.16
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof. (A) At Third Floor Roof.
0.41
2509
1029.07
... More
Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade. (ii ) N.B. Variety (Stone Metal) (A) At Third Floor Roof.
3.76
7135
26828.73
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor steel/Mild Stee. I. SAIL/ TATA/RINL. (A) At Third Floor Roof
1.1
89424
98366.76
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering
in any concrete work. (A) At 3rd Floor Roof
32.34
496
16072.33
... More
White washing including cleaning and smoothening surface thoroughly. All floors :(c) Three coats
3722.76
23
88787.83
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 15 mm
122.1
120
14697.18
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 20 mm
195.8
153
30102.29
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. vii) Double Y (b) 110 mm
20
326
6531
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.x) Bend (b) 110 mm
20
143
2860.2
... More
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.
15.37
532
8188.21
... More
Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.(Page no: 08/Item no: 06)
(A) AT GROUND FLOOR
451.85
59
26925.74
... More
Electrical Works: S & F 415V 100A TPN Switch fuse Unit with SS enclosure on Angle frame (make L & T) on wall with nuts bolts etc. incl. S & F 3 nos DIN type HRC fuse.
2
8063
16126.52
... More
S & F 415V 63A TPN Switch fuse Unit with SS enclosure on Angle frame (make L & T) on wall with nuts bolts etc. incl. S & F 3 nos DIN type HRC fuse.
2
5269
10538.48
... More
Supply & fixing 4 way double door horizontal TPN MCB DB with SS enclosure(Legrandcatno607715)(Legrand/Seimens/ABB) concealed in wall after cutting the wall & mending good the damages to original finish with earthing attachment comprising with the following. a) 100A Four Pole MCB isolator -- -1 No. b) 40A SP MCB ---10 Nos. c)16 to 32 A range SP MCB. --- 2 Nos.
2
10428
20857.6
... More
Supply & fixing SPN MCB DB (2+8) WAY (Make legrand/ Seimens/ABB) with S.S. Enclosure concealed in wall after cutting wall & mending good the damages & earthing attachment comprising with the following: a) 40 A DP isolator - 1 No. b) 6 to 16 A range SPMCB - 8 Nos.
8
4266
34135.2
... More
Supply & drawing PVC insulated (FR) Copper wire through alkathene pipe recessed in wall & mending good the damages.
3x1.5 sqmm
164
123
20286.8
... More
Supply & drawing PVC insulated (FR) Copper wire through alkathene pipe recessed in wall & mending good the damages.
2X2.5+1X1.5 sq mm
4
163
652.92
... More
Supply & drawing PVC insulated (FR) Copper wire through alkathene pipe recessed in wall & mending good the damages.
4 x 10 + 2x6 sq mm (TPN)
7
709
4963.14
... More
Supply & drawing PVC insulated (FR) Copper wire through alkathene pipe recessed in wall & mending good the damages.
2 X 4 + 1 X 2.5 Sqmm.(SPN &AC)
220
201
44327.8
... More
Supply & drawing PVC insulated (FR) Copper wire through alkathene pipe recessed in wall & mending good the damages.
4 x 16+ 2x10 sq mm (TPN)
15
1094
16412.1
... More
Supply & laying medium gauge 40 mm dia G.I. Pipe (ISI -m) .
32
313
10038.4
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 20mm pvc rigid conduct only celling portion and reamining portion concealed in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish(Ave. run 8 mtr.)
480
1369
657403.2
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switchboard with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish
a) on board
41
317
13019.14
... More
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switchboard with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish
b) Ave 4.5 mtr
35
1196
41865.6
... More
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.
23
48
1114.35
... More
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
36
493
17766.36
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type Power plug socket (Cabtree) with 16A Modular type socket (Cabtree) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections
2
581
1163.02
... More
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust & louvre shutter after cutting hole on wall & mending good the damages of following diameter: 30 cm (12")
31
559
17354.73
... More
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener
124
127
15812.48
... More
Earthing the installation by 50 mm dia. G.I. Pipe (ISI-M) of 3.64 mtr. Long driven to an depth of 3.65 mtr. Below the ground level including S/F 1X4 SWG. G.I. Earth wire (4 mtr. Long) with nuts bolts & washers.
12
1745
20949.48
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
6
198
1193.64
... More
Supply 4' single LED type tube light fitting complete with all acessaries directly on ceiling with HW round block & suitable size of MS fastener (Crompton, cat no - DIJB12LT8-20, LLT8-20)
124
831
103072.52
... More
Supply & fixing of 1200mm sweep Ceiling Fan (Orient,New Bridge, White) or equivalent as approved by the EIC,complete with all acessaries Incl S/F necy copper flex wire.
34
2232
75891.4
... More
Supply of 425 mm (12") sweep heavy duty exhaust fan (EPC/ Crompton)
31
3120
96747.9
... More
Supply & fixing 3W LED night Lamp (Crompton/Philps) for batten light points
27
171
4635.9
... More
Fixing only recessed/ Surface mounted light fitting complete with all accessories directly on wall/ceiling by screws etc. (C-2, 14(a)) (schedule Item).
1
104
104.09
... More
Fixing only outdoor / street light type fluorescent light fitting
complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting. (C-3 / 19) (Schedule Items)(For Compound light)
1
873
873.9
... More
Supply of 12 W Omega Surface LED downlight. Housing made of CRCA. Specular finished diffuser with high efficient LEDs for better light distribution (Make :Legero ,Product ID : LVS 6512 (CCT - 6000K) / Crompton/ Philips ) or equivalent as approved by EIC. ( For Portico/ Entrance )(Non Schedule Items)
1
1574
1574.84
... More
Supply of 90 W Compound light Unique designed Street light with High Power LED and Back driver opening comes with all the options suitable for lighting outdoor application. Wider spread angle of lens with toughened glass provide extra
coverage of light on roads. Aluminium Die cast Housing with unique heat sink fins structure provides thermal management to natural convection. This IP 66 product comes with fixture efficacy of 110 lm/w. (Make: Legero , Product ID : LCL 0090 (CCT-5700K) / Crompton / Philips ) or equivalent as approved by EIC. (Non Schedule Items).
1
6899
6899.31
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements