West Bengal State Marketing Board Tender

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting fixing and striking out after complete of works(upto roof of groun floor). f) 25mm to 30mm shuttering without staging in foundation. i) In First Floor

(i) Reinforcement for reinforced concrete work in all sorts of structure including distributors, stirrups binder etc. including supply of rods initial straightening and removal of loose rust ( if any) necessary cutting to requisite length hooking and bending to correct shape placing in proper position every intersection complete as per drawing and direction. For works in foundation, basement, roof of ground floor/upto 4m. i) Tor Steel II) Other than Sail/TATA/RINL

Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (i) (b) 20mm th. Cement plaster (1:6) i) In First Floor

Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (i) (c) 15mm th. Cement plaster (1:6) i) In First Floor

Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) (ii) (c) 10mm th. Cement plaster (1:4) i) In First Floor

Neat cement punning 1.5mm thick in wall dado window silt, floor, drqins etc. using cement @ 0.152M3/M2 i) In First Floor

Applying decorative Cement base paint ofapproved quantity after scraping the surfacethroughly as necessary as on plastered surfasce, ruled or concrete surface. Two coats i) In First Floor

Applying exterior grade acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish / Acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacture's specification and as per direction of EIC. (b) two coats i) In First Floor

Protective and decorative textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystaline additives derived from granite as per manufacture's specification and as per direction of EIC to be applied over acrylic primer as required.( Two Coats ) i) In First Floor

18mm to 22mm thick kota stone slab set in 20mm thick (avg) cement morter (1:4) in floor, stair & lobby including pointing in cement slurry with pigment matching the stone shade, including grinding & polishing as per direction of Engineer in charge to match with the existing work. (Slurry for bedding @ 4.4 kg/Sq.M and pointing @ 2.0 kg/Sq.M. (ii) 25 mm. thick i) In First Floor

Extra cost of labour for grinding Kota stone floor in treads and riser of steps.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour i) In First Floor

Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G. of approved type steel latch section 75mm wide fitting with coil wire spring to necessitate the fitting of required No. of C.I. pulleys on heavy type solid drawn seamless steel tube complete with locking arrangement both inside and outside specially built up side guide channels including providing a hook for a steel rolling shuttering the room , painting two coats of approved aluminum paint over a coat of priming complete.

Supplying fitting fixing fan hook for ceiling with 1 mtr long 16mm dia complete

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with superior synthetic enamel paint of approved made and brand including smoothening the surface by sand paper. (including a coat of priming.) i) on steel

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to I.S. 1038-1975 and manufactured from rolled steel section conforming to I.S7452-1974 with non friction projecting type box type type hinges. b) Openable steel window with side hung shutters.

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to I.S. 1038-1975 and manufactured from rolled steel section conforming to I.S7452-1974 with non friction projecting type box type type hinges. c) (viii) Extra over above item for- M.S. Integretd grill as approved design integreted with steel window or ventilator.

Supplying fitting fixing in position fibre glass panes of approved quality with resin. Nail, clip etc. as IS: 12866-1989. in all floor internal wall) (e) 4 mm thick.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all ecessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. ii) 110 dia

Adding 18% GST

Adding 1% Labour Cess