West Bengal State Electricity Distribution Company Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 Aug 2022
Closing Date12 Sep 2022
Tender AmountRefer Documents
Costs
EMD
₹ 2,45,847Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_WBSED_394784_1Bid Award Id
ViewTender No
ZM/BDN/Civil/eTender/22-23/13Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
b)Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete (Payment to be made on the basis of measurement of finished quantity of work) i)With earth obtained from exavation of foundation.
500
-
78.32
... More
Earth work in filling in compound, tank, low land,ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work). (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth.
500
-
383.62
... More
(i) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
500
-
423.78
... More
Single brick flat soling or picked jhama bricks including ramming and dressing bed to proper leveling and filling joint with power earth or local sand including cost of sand or earth.
800
-
327.24
... More
Cement concrete with graded stone ballast (40mm. size) cxcluding shuttering.1:3:6 proportion) Pakur variety
100
-
4878.3
... More
Brick work with 1st class bricks in cement mortar (1:6) a) In foundation & plinth
75
-
4860.12
... More
b) In superstructure Gr. Floor
40
-
5085.35
... More
c) In superstructure 1st Floor
15
-
5197.46
... More
125 mm Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor using approved H.B. netting in every third layer.
150
-
712.05
... More
75 mm Thick brick work with 1st class bricks in cement mortar (1:4) in ground floor using approved H.B. netting in every alternate layer.
76
-
464.6
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m. the equivalent floor ht. shall be taken as 4 m. and extra for works beyond the initial 4 m. ht. shall be allowed under 12(e) for every 4 m. or part thereof.) (Mode of measurement : Area in plan X mean height of staging upto soffit of shuttering above initial 4 m.) a) 25mm. to 30mm. thick wooden shuttering.
500
-
331.28
... More
b) In 1st floor
200
-
349.46
... More
c) 25mm. to 30mm. shuttering without staging in foundation.
700
-
207.05
... More
d) Steel shuttering or 9 mm to 30 mm thick approved quality plyboard shuttering in any concrete.
2000
-
366.63
... More
(a)Ordinary cement concrete (mix 1:1:5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes, Pakur variety.
300
-
5817.88
... More
b) In 1st floor (do)
2
-
5913.83
... More
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes Pakur variety
120
-
5304.7
... More
Reinforcement for reinforced concrete in all sorts of structures work including distribution bars. Stirrups binders etc. initial straightening and removal of loose rust cutting to requisite length, hooking & bending to correct shape, placing in proper position and binding with 1.6 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel / Mild steel. SAIL/ TATA/RINL. a)For works in foundation, basement and upto roof of ground floor up to 4 m.
30
-
61037.33
... More
b) 1st floor :
1
-
61471.63
... More
Labour for chipping of concrete surface before taking up plastering work.
600
-
21.21
... More
Plaster ( to wall, floor, ceiling etc.) with sans and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course, scaffolding/ staging where necessary. i) With 1:6 cement mortar : a) 15mm. thick ( Gr. Floor)
1500
-
137.36
... More
b) 15mm. thick ( 1st floor)
300
-
141.4
... More
c) 20mm. thick ( Gr. Floor)
1500
-
156.55
... More
d) 20mm. thick ( 1st floor)
200
-
160.59
... More
ii) With 1:4 cement mortar : a) 10mm. thick ( Gr. Floor) for ceiling bottom of chujja, beam etc.
250
-
124.23
... More
b) - do - - do - 1st floor
50
-
128.27
... More
Artificial stone in floor, dado, straicase etc. with cement concrete (1:2:4) with stone chips laid in panel as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m. All complete including all materials and labour in ground floor. 3mm. thick topping using grey cement. 35 mm
100
-
326.23
... More
Neat cement punning about 1.5 mm. in wall dado window sills drain etc.
500
-
34.34
... More
Band molding ( horizontal or vertical) of rectangular section, made with cement plaster 1:4 complete at ground floor.Projection upto 7.5 cm. depth or width 75 to 150 mm. (cement 2.46 kg/mts.)
200
-
58.58
... More
Wood work in door and window frame in fitted and fixed in position complete including a protective coat of painting at contact surface of the frame excluding cost of concrete, iron butt hings and M.S. clams sal (siliguri)
0.25
-
88094.22
... More
Supplying, fitting & fixing M.S. clamps for door and window frame made of flat bifurcated with necessary screws etc. by cement concrete(4:2:1) as per direction. 40mm. x 6 mm. 250 mm. length.
20
-
29.29
... More
Oxidised iron butt hinges of approved quality fitted and fixed with steel screw with ISI mark. 100 x 58 x 1.90 mm. (Oxidised)
20
-
61.71
... More
Supplying, fitting and fixing anodized aluminum barrel / tower / socket bolt 225 mm. long & 10 mm. dia bolt of approved quality make from extruded section with conforming to I.S. 204/74 fitted and fixed with cadmium plated screws 225 mm. long & 10 mm. dia bolt.
10
-
84.84
... More
Supplying, fitting and fixing anodized aluminum ‘D’ type handle of approved quality manufactured from extruded section confirming to I.S. specification (I.S. 230/72) complete with contibuous plate base. 100 mm. grip x 10 mm. dia rod.
10
-
69.69
... More
Supplying, fitting and fixing anodized aluminum aldrop / sliding bolt of approved quality manufactured from extruded section confirming to I.S. specification (I.S. 2681/66) complete .250 mm. long by 16 dia bolt.
5
-
235.33
... More
Door stopper (Brass)
6
-
118.17
... More
125 mm. long wooden buffer block fitted and fixed complete with necessary screws teak.
8
-
57.57
... More
M.S. or W.I. ornamental grill of approved design, joint continuously welded with M.S W.I flat sand bars for windows railing etc. fitted and fixed with necessary screws and hugs in ground floor. Grill weighing above 10kg/m2 and upto 16kg/m2
10
-
9986.88
... More
M.S. or W.I. ornamental grill of approved design, joint continuously welded with M.S W.I flat sand bars for windows railing etc. fitted and fixed with necessary screws and hugs in ground floor. Grill weighing above 16 Kg./sq.mtr and above
10
-
9792.96
... More
Collapsible gate with 40 x 40 mm. 6 mm. Tee as top and bottom guided rail 20 x 10 x 2 mm. vertical channels 100 mm. apart in fully stretched position 20x5 mm. M.S. flat as collapsible bracings properly riveted and washered including 38 mm. steel rollers including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes chasing etc. in walls, floor etc. and making good damages complete in groung floor (Payment will be made on the area of the gate covered by two guard rails and two extreme channels)
15
-
4373.3
... More
Supplying solid flush type doors of commercial quality the timber frame consisting of top and bottom rails and side style of well seasoned timber 6.5 cm wide each and the entire frame fitted with 37.5 mm. wide battens places both ways in order to make the door of soild core, internal lapping gurjan or similar wood veneers using phenol formaldehyde as gluee etc. complete including fitting and fixing the shutter in position but excluding the cost of hinges and other fittings in groung floor. 32 mm thick shutters ( single leaf)
8
-
2382.59
... More
Supplying, fitting and fixing steel window and ventilators with or without integrated grills conforming to IS 1038-1975 as per drawing and manufactured from rolled steel section conforming to Is 7452-1974 with non-friction projecting type, box type hinges glazing blips, lung locking brackt, handle plate etc. including hoisting in position, straightering reguired, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm. down cutting holes and mending good damages to match with existing surface complete in all respect excluding glaxing in ground floor, flash butt welded windows and ventilators. . a) Without integrated grill. i) Fixed type steel window as per I.S sizes with horizontal glazing bars.
10
-
1523.08
... More
ii)Open-able steel windows as per I.S.sizes with side hung shutters.
20
-
2220.99
... More
iii) Two point nose steel handle including fitting and fixing.
30
-
50.5
... More
iv) Aluminium peg stay 300 mm. long including fitting and fixing.
30
-
59.59
... More
v) Centre hung ventilator as per I.S. sizes 58 cm.
3
-
483.79
... More
c) Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. ( in all floors for internal wall & upto 6 m height for external wall). 3 mm thick (weighing 7.4 Kg/ Sqm)
40
-
481.77
... More
Supplying, fitting and fixing Godrej mortice lock (local best approved quality ) 6 lever with handle connected rods and keys crossing a with chromium plated handle.
4
-
1973.54
... More
Supplying, fitting and fixing Godrej mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete
4
-
1091.81
... More
Supplying, fitting and fixing in position approved PVC door frame made of extruded PVC multichamber hallow section having dimensions 60mm. x 50 mm. x 2 mm.(+0.2mm.), horizontal section by galvanized steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm. x 20mm. x 1.2mm. will be inserted on one full vertical side of the frame as reinforcement the frame will then be fixed in the opering with the help of PVC expandable fastener wooden gutties and galvanished steel screws including cost of all materials and labour hire charges of all materials, taxes and all other incidental charges complete.
12
-
281.79
... More
Supplying, fitting and fixing P.V.C door shutter of approved quality and shade in position, the style & rail of the PVC door shutter will be made of rigid PVC multicavity hollow chamber of 50mm. x 30mm. section with 2.0 mm.(+0.2mm.) wall thickness horizontal & vertical section shall be fixed to each other by self tapping screws and one solid ..tools and plants and appliances carriage of all materials, taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc.P.V.C door shutter 30mm. thick :
4
-
2148.27
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1:5:3) [with graded stone aggregate 10mm. nominal size] and admixture of water proofing compound as per manufacturer’s specification ..as directed(cost of water prppfing compound & polymer based paint to be paid separately.)
20
-
179.78
... More
a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality, including smoothening surface by sand papering etc.
30
-
38.38
... More
b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality, including smoothening surface by sand papering etc
350
-
29.29
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. a) On timber or plastered surface with super gloss(hi-gloss). On timber or plastered surface with super gloss(hi-gloss) 2 coats (any shade except white)
30
-
81.81
... More
b) On steel or other metal surface with super gloss (hi-gloss) 2 coats (with any shade except white)
350
-
79.79
... More
Cement washing including cleaning and smoothening surface thoroughly external surface one coat.
925
-
9.24
... More
M.S. works in cable trench cover slab chequared plate clamps cleats, brackets etc. made from fats, angles, channels, tees, chaquered plates 6 mm. thick etc. including necessary cutting to size fabricating drilling of holes, forging welding revetting tightening with bolts and nuts with necessary washer including erection, fitting and fixing in position with all labour and materials, complete as per drawing and direction.
100
-
9603.66
... More
Supplying, fitting and fixing UPVC pipes A-type and fittings conforming to IS : 13592-1992 with all necessary clamps, nails, including making holes in wall, floor etc. cutting trenches in any soil, thorough masonry concrete structure etc.UPVC pipes. i) 110 mm. dia
50
-
253.51
... More
ii) Shoe - 110 mm. dia
10
-
112.11
... More
iii) Tee - 110 mm dia
10
-
173.72
... More
Supplying, fitting and fixing flat back urinal in white vitreous china ware of approved make in position with brass screws on 75 x 75 x 75 mm. wooden blocks complete. 470 x 280 x 340 mm.
2
-
954.45
... More
Supplying, fitting and fixing orrissa pattern – water closet in white glazed vitreous china ware of approved make in position complete excluding ‘D’ or ‘S’ trap 530 x 410 mm.
1
-
1537.22
... More
Supplying, fitting and fixing 10 liter PVC low down cistern conforming to I.S. specification with PVC fittings complete C.I. brackets including two coats of painting to bracket etc.
1
-
1025.15
... More
Supplying, fitting and fixing approved brand 32 mm. dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm. long.
5
-
75.75
... More
Supplying, fitting and fixing approved brand 32 mm. dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps.750 mm. long.
5
-
59.59
... More
Supplying, fitting and fixing approved brand PVC connector white flexible with both end coupling with heavy brass CP nut 15 mm. Dia . 450 mm. long.
5
-
82.82
... More
Supplying, fitting and fixing white china best quality of approved make wash basin with C.I. brackets on 75 x 75 mm wooden blocks C.P.waste fittings of 32 mm. dia one of approved quality brass C.P. pillar cock of 15mm. ………..including mending good all damages and painting the brackets with two coats of approved paints. 550 x 400 mm. size.
1
-
2230.08
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm. thick with silvering approved quality as per I.S.I. specification supported on fiber glass freme of any colour frame size 600 x 450 mm. complete in all respect as per direction of engineer-in-charge.
2
-
488.84
... More
Glass shelves with aluminium guard rails size 600 x 125 mm. with 505 mm. thick glass.
1
-
484.8
... More
Supplying, fitting and fixing porcelin soap tray of approved make. (i) Recessed soap tray of size 150 mm. X 150 mm.
2
-
341.38
... More
Supplying, fitting and fixing allumium approved brand towel rail 25 mm. dia 450 mm. long with two brackets complete all respect as per direction of engineer-in-charge.
2
-
143.42
... More
a) Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 /1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).With valamoid joints including sealing with sand cement mortar (4:1) upto quarter depth 100 mm. (internal)
5
-
694.88
... More
Supplying, fitting and fixing C.I. approved patent vent cowl confirming to ISS 1729 of 1970 supplied fitted and fixed in position cpmplete with load caulked jointing.100 mm. dia.
1
-
314.11
... More
Supplying, fitting and fixing cast iron ‘P’ or ‘S’ trap conforming to IS 3989/1970 and 1729/1964 including lead caulked joints sand painting two coats to the exposed surface. 100 mm. ‘P’ trap.
1
-
957.48
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.For 20 users
A) With Pakur variety.
1
-
45657.05
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement
plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.
1
-
15487.34
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20
mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary
reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
i) With Pakur variety.
1
-
6759.93
... More
Supplying, fitting and fixing C.P. stop / bib cock.i) Chromium plated bib cock short body.
6
-
544.39
... More
ii) Chromium plated stop cock
9
-
497.93
... More
Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
1
-
560.55
... More
Supplying, fitting and fixing approved quality PVC. water storage tank with closed up with lid ( Black) Multilayer top cover 1000 liter capacity.
1
-
5179.28
... More
Labour for hoisting plastic water storage tank (i) upto 1500 Lt capacity
1
-
96.96
... More
Supplying, fitting and fixing peets valve full way gun metal standard pattern best quality of approved brand with fittings. i) 25 mm.
1
-
921.12
... More
ii) 40 mm.
1
-
1662.46
... More
Supplying, fitting and fixing shower of approved brand and make.Chromium plated round shower with revolving joint.
1
-
456.52
... More
18 mm. thick marble partition slab with chawk doongri marble square cut, both side polished with two front corners rounded and edges polished fitted and fixed complete.
1
-
1440.26
... More
Supplying, fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work and 4 nos of key stones(10mm.) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc . with sand cement mortar (1:4) 20 20mm thick 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/sqm & joint filling using white cement slurry @ .20 kg/sqm area of each tile upto 0.09 sqm coloured decorative
160
-
747.4
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings on C.I. brackets including two coats painting of brackets sink only 540 x 430 x 180 mm.
1
-
3317.85
... More
Supplying, fitting and fixing fan hook for ceiling with 1mtr. Long 16mm. dia. For complete including mending damages.
20
-
101
... More
Supplying, fitting and fixing 100 mm. C.I. round gratings (heavy type)
1
-
62.62
... More
Anti – termite treatment to bottom surface (in case of masonry foundation and basement) and the sides (upto height of 300mm from bottom) of the excavation trenches with chemical emulision by admixing chloropyrofos emulsiflable concentrates (1% concentration) with water by weight at the rate of 5 litres per Sqm area . the work shall be carried out as per specification described in 6.2.1 of code IS-6313 (part-ii) 1981 (mode of measurement will be the plan area of foundation treated)
100
-
93.93
... More
Anti – termite treatment to the top surface of the consolidated earth within plinth walls with chemical cmulsion by admixing chloropyfos emulsifiable concentrate (1% concentrate) with water by weight at the rate of 5 litres per Sqm of the surface before sand bed or sub- grade is laid. holes upto 50 mm to 75 mm deep at 150 mm centre to centre both ways shall be made with 12 mm di mild steel rod on the surface to facilitate saturation of the soil carried out as per specification described in para 6.4 of code IS-6313(part-ii) 1981. ( mode of measurement will be per Sq.m. of plan area of plinth treated)
220
-
111.1
... More
Anti – termite treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyfos emulsifiable concentrate (1% concentrate) with water by weight at the rate of7.5 lit per sq.m of the vertical surface of the substructure of earth side of the foundation. the work shall be carried out as per specification as described in para 6.3.1 of code IS-6313 (part-ii.. as per specification as described in para 6.3.1 of code I.S. 6313 (part –II) 1981.(mode of measurement will be per sq.m. of vertical area of foundation treated)
155
-
138.37
... More
Supplying, fitting and fixing pedestal of approved make for wash basin (white)
1
-
1511.97
... More
Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work). A) In 10-12 micron thickness Anodizing film . . a) Movable door shutter : i) Door frame (top & sides)
35
-
318.15
... More
ii) Shutter top rail
5
-
307.04
... More
iii) Shutter bottom rail
5
-
452.48
... More
iv) Shutter lock rail
5
-
380.77
... More
v) Door vertical
35
-
335.32
... More
vi) Glazing clip
130
-
50.5
... More
Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work). .A) 15 micron colour Anodizing (i) Coloured a) 2- track sliding window
i) Bottom frame
10
-
246.44
... More
ii) Top and side frame.
30
-
220.18
... More
b) 3- track sliding window
i) Bottom frame
20
-
355.52
... More
ii) Top and side frame.
50
-
309.06
... More
c) Shutter for all track sliding window. i) Bottom & Top member.
35
-
132.31
... More
c) Shutter for all track sliding window. ii) Style side member.
60
-
129.28
... More
c) Shutter for all track sliding window. iii) Interlock member.
40
-
162.61
... More
Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
100
-
14.14
... More
Supplying maruti lock (100mm)
50
-
46.46
... More
Supplying, profiles of required section made of aluminum alloy extrusive confirming to I.S. 733-1983 and I.S. 1285-1975 anodised film thickness and specification colour/natural) matt finished confirming I.S. 1868-1983 for fabrication of composite door, sliding & casement windows, partitios, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work). A) In 10-12 micron thickness Anodizing film . . a) Fixed Partition (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.) i) Top , bottom & side member.
10
-
324.21
... More
ii) Intermediate member.
5
-
342.39
... More
Supplying bubble free float glass of approved make and brand. Conforming to IS:2835-1987 5mm thick clear glass
5
-
531.26
... More
6mm thick clear glass.
5
-
614.08
... More
Supplying concealed type heavy duty hydraulic double action floor spring along with top / pin set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge..
4
-
1746.29
... More
Supplying concealed type PVC headed aluminum tower bolt for double leaf doors as per approved make. 300 mm long
8
-
74.74
... More
Supplying ‘U’ shaped EPDM gasket of approved make and brand and brand as per direction of EIC.
20
-
15.15
... More
Supplying T' shaped EPDM gasket of approved make and brand as per direction of EIC.
145
-
13.13
... More
weather gasket / wool pile for door vertical
10
-
19.19
... More
Labour charges for fabrication and installation of composite door window, partition made from anodized extended alloy aluminum sections. For the following units:- fully glazed single leaf reamless swing door made of anodised aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydrolic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine / EPDM gasket
10
-
1293.81
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. i ) 2 track sliding window.
10
-
702.96
... More
ii ) 3 /4 track sliding window.
20
-
950.41
... More
Applying exterior grade acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured ( matt finish ) or smooth finish acrylic exterior emulsion paint including scraping and preparation the surface thoroughly complete as per manufacturer`s specification and as per direction of the EIC. G.Fl.
1000
-
31.71
... More
ii)In 1st floor
175
-
32.43
... More
Protective and decorative acrylic exterior emulsion paint of approved quality as per manufacturer`s specification and as per direction of EIC to be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer (G.Fl 2 coats) normal acrylic emulsionprimer 100% acrylic exterior emulsion paint of approved quality as per manufacturer’s specification. i)In ground floor
900
-
84.84
... More
ii) In 1st floor
175
-
85.56
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).
400
-
123.22
... More
Applying interior grade acrylic primer of approved quality and surface old or new surface to receive distemper / acrylic emulsion paint including scraping and preparing the surface thoroughly. Water based interior grade acrylic primer.
400
-
31.11
... More
Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (two coats) Luxury quality
400
-
70.7
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
140
-
1014.04
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency](iii) Area of each Slab/tile exceeding 0.60 sq.m but not exceeding 1.00 sq.m.
50
-
1924.05
... More
Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately].
150
-
822.14
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three )nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade)Brushed/Mat finish, complete as per direction of the Engineer-incharge. Weight of Strainless Steel railing per metre 6.5 Kg(approx)
15
-
9167.77
... More
Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. (Payment to be made on vertical height in between 1st step and top platform.) (a) With 1200 mm.dia. well
3.75
-
4232.91
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1200
-
24.24
... More
Supplying stacking & spreading of approval quality Crushed stone at site of 26.5 mm size completely free from weathered and dead materials (from Pakur variety stone aggregates as specified ) as per direction of Engg in charge including watering ,levelling, dressing, complete in all respect.
90
-
1452.89
... More
Supplying &laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. 60 mm thick interlocking designer concrete paver block M35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (ii) Coloured Decorative
120
-
1329.16
... More
Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. 12 mm. dia. 250mm long
180
-
74.74
... More
Supplying galvanised staples fitted and fixed complete. 44 mm. to 50 mm. size
500
-
3.55
... More
Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary.
10
-
27.96
... More
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. Including fitting, fixing bottom roller in position.
4.5
-
10190.9
... More
Dismantling all types of masonry excepting cement concrete plain or reinforced. Stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.
2
-
451.47
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In groung floor including roof. (a) upto 150 mm. thick .
2
-
948.39
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof.
3
-
1975.56
... More
Cleaning compound premises of shrubs,plants,jungles etc by cutting and removing as directed(specific permission of Engineer-in-Charge prior to execution will be necessary)(payment to be made on area cleared)
2500
-
11.11
... More
Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in -Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping). . Gr. floor Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -Both side decorative laminate, Exterior grade, 12mm thick
5
-
1304.92
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). (a) Depth upto 1.5 m.
20
-
379.76
... More
(b) For additional depth beyond 1.5 m. and upto 3.00 m
10
-
433.29
... More
Labour for boring tube well or required dia. By water jet system through any type of soil strata including hire and labour charges for boring pipes scaffolding tools and plants as necessary and taken out them and lowering pipes, strainers, blind pipes etc. and fitting and fixing the same complete including bucket washing and others incidential works in this connection. the tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. For depth upto 150 m. for 80 mm dia tube well with top enlargement of 100 mm dia. 1. 100 mm dia boring etc. top top enlargement
50
-
434.3
... More
2.80 mm dia. Boring etc.
30
-
292.9
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 100 mm dia.
40
-
882.74
... More
2. 80 mm dia.
40
-
583.78
... More
(B) reducing Socket 100 mm x 80 mm
1
-
143.42
... More
Supplying high density polythene strainer of approved make with adapter conforming to IS Specification. 1. 80 mm dia.
15
-
828.2
... More
Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work CPVC Pipes Class-1, SDR-11. 15 mm dia.
40
-
107.06
... More
20 mm dia.
5
-
144.43
... More
25 mm dia.
5
-
210.08
... More
40 mm dia.
80
-
407.03
... More
(b) For Concealed Work CPVC Pipes Class-1, SDR-11 15 mm dia.
40
-
141.4
... More
20 mm dia.
10
-
172.71
... More
25 mm dia.
5
-
237.35
... More
Reducing Socket 200 mm X 250 mm
1
-
1523.08
... More
Supplying, fitting and fixing cast iron spun pipe conforming to I.S. 1536/1976 with all necessary specials including cutting trenches in any soil or through masonry, concrete etc., if necessary,and mending good all damages including jointing pipes with Tyton joints as per manufacturer's specifications and filling up the trenches all complete but excluding the cost of masonry or concrete work, if required Class A 250 mm nominal dia.
10
-
4263.21
... More
Washing and development tube well with air compressor pump and engine for 8 (eight) hours continuos pumping per day with necessary arrangement for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
1
-
7613.38
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.
3
-
2049.29
... More
Packing the annular space between the outside of the housing pipes and the bore with puddleballs of approved by the direction of the Engineer-in-charge including cost of all materials and labour complete.
0.3
-
421.17
... More
Supplying 1H.P. KSB Co. make 220 volt submersible motor pump with 60 m cable pump model KSB 4c/8 and motor model UMA(S), 1.5 sq. mm. X 3 core phenolex flat cable with following control box 1 H.P. single phase (Steel casing) etc. and fitting fixing complete as per direction of Engineer-in-charge.
1
-
24918.72
... More
Supplying fitting and fixing GI cap at top 1. 100 mm
1
-
140.39
... More
Supplying fitting and fixing MS socket ring 1. 100 mm
1
-
109.08
... More
Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.
1
-
2257.35
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 200 mm
1
-
2155.34
... More
100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect. In ground floor
250
-
532.27
... More
Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) In Roof: With 0.60 mm thick sheet
350
-
625.19
... More
Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (A) 300 mm lapping each way (i) With 0.60 mm sheet
50
-
369.66
... More
Supplying fitting and fixing 600 mm (±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) (The rate is exclusive of the cost of posts)
200
-
412.08
... More
Labour for fitting line of wire to posts, tightening by straining bolts and fixing the wire ( in taut condition) to the post with staples (including the cost of cutting and lapping joints in the wire, as necessary and including the cost of staples and straining bolts and also the labour for fixing the staples but excluding the cost of straining bolts) (Payment to be made on length of the individual line of wire) (a) Galvanised wire 9 to 12 BWG
800
-
2.02
... More
Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (A) 300 mm lapping each way With 0.63 mm sheet
40
-
383.8
... More
Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping) (a) 225 mm. wide gutter
100
-
345.42
... More
M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 8161969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For trusses spanning up to 12.00 m
3
-
73680.51
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements