West Bengal State Electricity Distribution Company Limited Tender

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5sqmm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (for 15 A plug point/exhaust fan point), Average run 9 Mtr with 150 point

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.

Supply and Fitting 4 ft 40 Watt Green Perform LED Tube Light complete indoor decorative luminaries for celling mounting with opal acrylic diffuser and Fixing the light fitting suspended 25 cm. bellow the celling with 2 nos. 20mm dia EI Conduit(14SWG) supports incl S&F EI Conduit, Ball socket/ Socket type celling plate and connecting the length of pvc insulated wire and painting etc. as required by twin flat 1/1.40 mm wire of 1.10mtr. length. (Philips Make, Model No: BN208C LED40/DL LI200FR) equivalent

Supply Fitting and Fixing 25 Watt Surface mounted Full Glow LED lighting luminari with innovative design for modern work space with best class luminaire efficiency80 lm/watt (Philips) (Philips Make, Model No: RC380 LED-25-6500 PSE OD WH) equivalent

Supply, Fitting and Fixing 48 inch Sweep Ceiling Fan Fixing on the Celling with Blade Downroad as required (HAVELLS/USHA /KHAITAN / POLLAR ) and necessary connection making by Flex Twin Core copper wire with Electronic Regulator.

Supply of Cabin Fan and Fixing on wall/ceiling by S&F rag bolts, nuts & the Wall washers (6 mm dia x 62 mm long) or as reqd. incl. 24/0.20 S&F PVC insulated flexible copper wire 0.5 mt. length (HAVELLS/USHA /KHAITAN / POLLAR ) and necessary connection making by Flex Twin Core copper wire.

Supply, Fitting and Fixing 60 cm dia Exhaust Fan after making hole in wall and making good damages (HAVELLS/USHA /KHAITAN / POLLAR/CROMPTON) and smoth cement finish etc as practicable as possible and providing necessary lengh of PVC insulated copper wire and making necessary connection.

Supply & Fixing 240 V, 25A Modular type socket, 25 A,Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring for outdoor type fiuorescent/SV/MV light fitting including S&F 15 mm dia GI Pipe (ISI-Medium) brackcte with 15 Amp Tumbler Switch incl. 30.48 cm. outdoor type dispersive light fitting with GI pipe bracked and providing 25 X 6mm. Galv. MS Flat clamp with bolts nuts etc . and incl. S&F ornamental tie with galvanased MS Flat Of approved Design and painting . (Avg Run 3 mtr.)

Supply Fitting and Fixing 90 Watt LED Outdoor type Luminary (Philips Make) or equivalent

Supply and arrangement of panel on iron leg fixing on wall with approved manner consisting with the follwing arrangement , Making iron Panel consist of 12 nos. Iron legs, 6’ X 4’ dimensions with Horizontal iron frame, 4’ X 2’ three door system as required fixing on wall in approved manner fixing all the device properly and covered with fabricated metal box with ventilation arrangement panting and also fixing with danger board complete lock and key protection also with earthing arrangement.

Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit/GI conduit and painting 2x6 sqmm wire in 19 mm conduit incl. S&F 1x14 SWG GI ECC (EI Conduit)

Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit/GI conduit and painting 2x2.5 sqmm wire in 19 mm conduit incl. S&F 1x14 SWG GI ECC (EI Conduit)

S & F of indoor type wall/ floormounted cubical type MV distribution panel suitable for 415 V, 50 Hz, A.C Supply made out of 14 SWG CRCA Sheet. The Panel shall be totally Power Coated, enclosed, dust & Vermin proff, neoprene gasket of thikness not less than 2 mmshall be used between adjacent units & beneath all covers so that the joints areeffectively dust & vermin proof. The panel shall have uniform height and depth. With insulated and spring loaded thumb screws. The bus bar chamber shall have three phase and neutral busbars of suitable size. The Panel shall be completely factory wired with PVC insulated Copper wire and shall be ready for connection to the equipments. The Panel Consists of the following: a) Incoming: 200 amps, 50KA 4-Pole MCCB 1 NO b) Outgoing : i) 160 amps, 50KA 4-Pole MCCB 8 NO ii) 63 amps, 25 KA 4-Pole MCCB 4 NO iii) 40 amps, 50KA 4-Pole MCCB 15 NO C) Accessories - i) 96 sqmm Digital Voltmeter(500 V) with selector awith - 1 set ii) 96 sqmm Digital Ammeter(400 A) with CT and selector awith - 1 set iii) Pilot lamp with protect Fuse - 03 set (L&T/Siemens)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Havells 4 Way Enclosure (DHDPTHODRW04)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Havells 2+8 way Enclosure HDPSNODRW08)

Supply and allaying of 1.1kV grade 4 core 25 sq. mm pvc insulated and sheathed wired armoured of aluminum conductor with two numbers 10 SWG GI earth continuity wire partly in underground trench 460mm (1’-6”) wide into 760mm (2’-66”) average depth with brick protection on the top of the cable with 8 nos brick per 1 metre including filling the place between the cable and also the trench with shifted soil labeling up and restoring surface duly rammed and partly after cutting floor/pavement/wall and making holes including embedding the cable at an average depth of 75 mm (3”) in floor /pavement/wall etc. and mendining good damages to original finish including removing the rubbish (Make Gloster/Niko/Havells) from WBSEB Supply to P.Board

Earthing with 65 mm dia GI pipe (TATA-medium) X 3.00 Mtr. Long and 1 no. 65x6 mm galvanized (hot dip) steel strip (4 Mtr. Long), 20 mm dia X 125 mm long GI Bolts, Double Nuts Double Washers, incl. S&F 65 mm dia GI pipe (ISI-Medium) protection(3 Mtr. Long) to be filled with Bitumin, partly under the ground level and partly above ground level driven to an average depth of 3.65 Mtr. bellow the ground level and restoring surface duely rammed as bellow for soft soil.

Supplying and fixing earth busbar og galvanized (Got Dip) MS Flat 50x6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI Bolts, Nuts, Washers, spacing insulators etc. as required