West Bengal State Electricity Distribution Company Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jan 2025
Closing Date17 Feb 2025
Tender Amount₹ 1,36,41,252
Costs
EMD
₹ 2,73,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Proposed New 33/11kv Sub-station At Mega Power Loom Textile Park At Kalyani Under Kalyani Division, Dist-nadia
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBSED_805110_1Tender No
ZMB/Civil/ETENDER/24-25/F02/02Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
200
945
189114
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
2000
364
729220
... More
Cement concrete with graded stone ballast (40 mm size excluding shuttering)
In ground floor
(A) [Pakur Variety]
(a) 1:3:6 proportion
120
5429
651571.2
... More
Brick work with 1st class bricks in cement mortar (4:1)
i)In Foundation &Plinth.
120
5738
688658.4
... More
ii) in Ground Floor (1:6)
65
5964
387663.25
... More
125 mm thick brick work with 1st class bricks in cement mortar (4:1)
i) inGround Floor
500
743
371680
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)
(a) With earth obtained from excavation of foundation.
380
78
29761.6
... More
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing
compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not
required over concrete or painted surface). [Note: - Waterproofing as per item NO 60, polymer based paint as per item 59 (a) of Section (C).
25
191
4797.5
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 M using approved stout,props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams,columns,lintels curved for straight including fitting fixing and striking out after completion of works.
a) 25 mm to 30 mm thick wooden shuttering as per decision and direction of Engineer- in- charge.
i) Upto roof of ground floor.
1900
338
642865
... More
b) 25 mm to 30 mm shuttering without staging in foundation.
300
211
63327
... More
Reinforcements for R.C. work in all sorts of structures including distribution bars,stirrups,binders etc, including supply of rods, initial straightening and removal of loose rust(if necessary). Cutting to requisite length,hooking and bending to correct shape, placeing in proper position and binding with 16 gauge black annealed wire at every intersection complete as per drawing and direction.
a) For Tor steel / Mild steel
I. SAIL / TATA / RINL
i) For works in foundation, basement and upto roof of ground floor / upto 4m.
45
61185
2753361
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1150
24
27876
... More
Ordinary cement concrete (mix 3:1.5:1) with graded stone chips (20 mm down) excluding shuttering and reinforcement, if any,in ground floor as per relevant IS codes.
Pakur variety
i) inGround Floor
270
6185
1670058
... More
Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various
grades.
137
120
16466.03
... More
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size)) excluding shuttering and reinforcement, if any,in ground floor as per relevant IS codes.
Pakur/ Chandi variety
i) inGround Floor
130
5634
732459
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).
(c) Sal : Local.
0.25
78447
19611.93
... More
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)
(a) 40mm X 6mm, 250mm Length
24
29
702.96
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side
styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal
lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
(a) 35 mm thick shutters (single leaf)
9
2685
24170.31
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
100mm. X 75mm. X 3.50mm.
16
66
1066.56
... More
Supplying , fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs. a) with 50mm iron Butt-hinge. i) Sal : local.
6
30
181.8
... More
Anodized aluminum D-type handle of approved quality manufactured from Ex-traded section confirming to I.S. specification (IS.230/72) fitted and fixed complete.
a) With continuous plate base (Hexagonal/ round rod)
(vi) 150 mm grip x 10 mm dia rod
8
97
783.76
... More
Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated
(ix) 300mm long x 10mm dia. bolt.
12
99
1199.88
... More
Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made
separately.
12
101
1212
... More
Supply fitting approved type ventilator in position after cutting holes in walls setting in cement mortar, mending damages to wall and plaster and two costs of point of approved brand and shade.
(b) R.C.C ventilator of 20 mm. thick
i) Upto 0.10 Sqm. Area
12
109
1308.96
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and
manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect
excluding glazing.
In Ground floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
Without integrated grills.
a) Fixed type steel windows a per I.S. sizes with horizontals glazing hares in G.F.
30
1523
45692.4
... More
b) Operable steel windows as per I.S. sizes with side hung shutters and horizontal-glazing bars with or without fixed type ventilators (The extra rate admissible for the operable portion only.)
25
2220
55524.75
... More
Centre hung ventilators as per I.S. sizes 580 mm.
1
483
483.79
... More
(c ) Extra over item no. (a) and (b) for,
iii) Two points nose steel handle including fitting and fixing
40
50
2020
... More
vi) Steel peg stay 300 mm. Long including fitting and fixing.
40
35
1414
... More
(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
720
94
68356.8
... More
Collapsible gate with 40 mm X 40 mm X 6 mm tee as top and bottom guide rail 20 mm X 10 mm X 2 mm vertical channels 100mm. Apart in fully stretched position 20mm X 5mm M.S. flats aqs collapsible bracings properly and washed including 38 mm steel rollers including locking arrangements fitted and fix in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages completed in ground floor.( Payment to be made on the area of the gate covered by trwo guard rails and two extreme channels)
15
4373
65599.5
... More
Plaster(to wall,floor,ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including throating,nosing and drip course where necessary(Ground floor).[ Excluding cost of chipping over concrete surface]
A) In ground floor.
i) With 6:1 cement mortar
a) 20 mm thick plaster.
560
176
98980
... More
b) 15 mm thick plaster.
1000
152
152510
... More
ii) With 4:1 cement mortar.
a) 10 mm thick plaster.
300
134
40299
... More
Neat cement punning about 1.5mm. thick in wall, dado, window sills, floor, drain etc.
350
34
12019
... More
Supplying, fitting and fixing Marble Slab/Tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av0 thick base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in- charge in Ground floor. (White cement and Pigment to be supplied by the Agency)
(a) With Makrana plain pink/ Adranga Pink/ Makrana plain pink/ Garbh Gulabi/ Udaypur Green/ Black Bhaslana.
(iii) Area of each Slab/tile exceeding 0.6 sq.m but not exceeding 1.00 sq.m.
14
1942
27191.22
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &
finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative
42
764
32111.94
... More
Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two
number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable
fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
5
281
1408.95
... More
PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised
tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0
mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section
frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear.
The rate is inclusive of cost of all materials, labour, and hire of tools and plants and
1.6
2148
3437.23
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty completion all floors. a) 3mm thick
50
481
24088.5
... More
Supplying fitting & fixing UPVC Pipes A type and fitttings conforming to IS 13592-1992 with all necessary clamps, nails including making holes in walls, floors etc cutting trenches in any soil through masonary concrete structures etc, if necessary, and mending good damages including joining with jointing materials.(for rain water draining)
A.) UPVC Pipes--110mm
45
253
11407.95
... More
Priming one coat on timber or plastered or surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
25
38
959.5
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
162
29
4744.98
... More
Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of E.I.C
(ii) One coat on new surface. a) In ground floor.
1500
31
47565
... More
Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
a) Normal Acrylic Emulsion
i)In Ground floor (Two Coat)
1500
67
101505
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.
(a) On timber or plastered surface :
With super gloss (hi-gloss) -
(iv) Two coats (with any shade except white)
60
81
4908.6
... More
(b) On steel or other metal surface :
With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
160
79
12766.4
... More
Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
650
123
80093
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.
(In Ground Floor) (a) One Coat
i) Water based interior grade Acrylic Primer
650
31
20221.5
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats)
i) Standard Quality
650
62
40703
... More
Providing & fixing Acid proof tiles size 300x300x10mm thick in floor & dado conforming to I.S. 4457 as per drawing with a base one coat mastic bituminous primer followed by 6mm thick bittuman mastic layer over the mastic layer base mortar of 6-7 mm. thick sodium silicate mortar as I.S. 4832 (part-I) tiles will be laid. At the green stage all the joints will scrapped off, inter all the joints filled with epoxy rasin mortar. The joint between two tiles shall not be exceed 6mm.
75
688
51660.75
... More
Supplying profiles of required section made of Aluminium alloy extrusions conforming to IS 733 -,1983 and IS 1285- 1975 , anodizied ( with required film thickness and specified colour / nature ) matt finished conforming to IS 1868 –1983 for fabrication of composite door , sliding and casement windows, partions framed of basic sections of any ISI embossed / certified make and brand as per direction of the EIC. ( Payment to be made on finished length of work) (A) In 10-12 Micron thickness Annodizing
film
I) Natural white
i) Fixed partitions.
(Unsupported length of vertical member upto
1.5 mtr. Height of both ends of vertical
member restrained but panels within 0.9
sq.m.)
i) Top , bottom & side member.
28
324
9077.88
... More
k) Movable door shutter.
i) Door frame (top & sides).
26
318
8271.9
... More
ii) Shutters : Top rail -
5
307
1535.2
... More
Bottom rail
5
452
2262.4
... More
Lock rail
5
380
1903.85
... More
Door Vertical
40
335
13412.8
... More
Glazing clip
150
50
7575
... More
Labour charges for fabrication and installation of , composite door , windows, partitions , made from anodized extruded alloy Aluminium section for the following units : A) Fully glazed single / double leaf rimless swing door made of anodizied Aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning , fitted with heavy duty hydraulic action floor spring with top pin assembling and fitted with inbuilt locking arrangement and all other necessary fitting , fixtures adhesives and joineries , cutting the glass to requisite shape and size , moulding the edges for fitting the same with dry set neoprene/ EPDM gasket . The rate includes hire charges of all tools and plants , adhesieves , joineries, but excludes the cost of extruded Aluminium sections, glass, EPDM gasket, locking arrangement, weather gasketting / wool pile ,floor spring, top pin, handle , tower bolt etc.
15
1516
22740.15
... More
Supplying heavy duty hydraulic double action floor spring along with top pin/ set of pivots conforming IS 6315 or any approved make as per direction of the EIC.
4
1746
6985.16
... More
Supplying concealed type heavy duty PVC headed Alumunium tower bolt for double leaf doors as per approved make and brand, as per direction of the EIC. a) 300 mm long ---
4
74
298.96
... More
Supplying EPDM gasket of approved make and brand as per direction of the EIC . i) Weather Gasket / Wool pile for door vertical
20
19
383.8
... More
ii) EPDM / weather gasket for outer frame and mullion.
60
15
909
... More
Supplying bubble free float glass of approved make and brand conforming to IS 2835 – 1987. i) 5 mm thick clear glass
10
531
5312.6
... More
Supplying 4 – Lever Mortice lock or any approved make brand as per direction of the EIC.
i) 150 mm ------
4
381
1527.12
... More
M.S. structural works in columns, beams etc. with simple rolled
structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.
For structural members of specified sections weighing less than
22.5 Kg./m
20
73329
1466580.6
... More
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
140
1034
144793.6
... More
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone
slab in wall, dado in 15 mm thick [avg] cement mortar (1:3)
including making suitable arrangement to hold the stone
properly by brass / copper hooks including pointing in cement
mortar (1:2) (1 cement : 2 marble dust) with admixture of
pigments matching the stone shade, including grinding and
polishing all complete as per direction of Engineer-in-charge
including cost of materials, labour, scaffolding, staging,
curing complete.
[Using cement slurry for bedding @4.4 kg/Sq.m and for
jointing @1.8 kg/Sq.m]
20
1171
23432
... More
Extra cost of labour for prefinished and premoulded Nosing
to treads of steps, railing, window sill etc. of Kota Stone.
18
226
4072.32
... More
Iron door ring of approved quality fitted and fixed with nut and washer complete (i) 50mm dia
50
17
858.5
... More
Grinding to marble / mosaic floor including remaining stone, if necessary, after cutting with manual labour / machine, where necessary
15
20
303
... More
Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps.
20
211
4221.8
... More
Labour for Chipping of concrete surface before taking up Plastering work.
350
21
7423.5
... More
Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials.
(a) With 1200 mm.dia. well
5
5053
25265.15
... More
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)
250
260
65145
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.
30
5503
165104.7
... More
Dismantling all types of masonry excepting cement
concrete plain or reinforced, stacking serviceable
materials at site and removing rubbish as directed
within a lead of 75 m.
a) In ground floor including roof.
10
451
4514.7
... More
Dismantling all types of plain cement concrete
works, stacking serviceable materials at site and
removing rubbish as directed within a lead of 75
m.
In ground floor including roof.
(a) upto 150 mm. thick
5
948
4741.95
... More
Dismantling R.C. floor, roof, beams etc. including
cutting rods and removing rubbish as directed
within a lead of 75 m. including stacking of steel
bars.
(a) In ground floor including roof.
10
1975
19755.6
... More
(PART - B): SANITARY & PLUMBING WORKS
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union cross, elbow nipple, long screw reducting socket reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground (payment will be made on the center line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials)
(A) For Exposed Work.
i) 15 mm dia medium quality
11
193
2133.12
... More
ii) 20 mm dia medium quality
28
228
6391.28
... More
ii) 25 mm dia medium quality
10
308
3080.5
... More
iv) 40 mm dia medium quality
25
419
10478.75
... More
Supplying, fitting and fixing pillar cock of approved make---CP pillar cock-15mm{Essco or similar band]
1
560
560.55
... More
Supplying, fitting, fixing G.M wheel valve of approved brand and made tested to 21 Kg. Per sq. cm. (for water lines only.) --- 25 mm.
40 mm dia
1
1605
1605.9
... More
20 mm dia
1
610
610.04
... More
25 mm dia
2
785
1571.56
... More
Supplying, fitting and fixing bib cock or stop cock.
B) i. Chromium plated Stop cock [Equivalent to Code no. 513(A) & 513 (B) & Model - Tropical/Sumthing of ESSCO or similar brand.]
8
497
3983.44
... More
Supplying, fitting and fixing bevelled edged mirror. 5.5 mm thick silver red as per L.S. 3438/1965 together with brass C.P. hinges.
i) 450 x 300.
1
370
370.67
... More
Supplying, fitting and fixing towel rail with two brackets.
a) C.P. over brass.
b) I) 25 mm dia and 600 mm long
1
434
434.3
... More
Supplying, fitting and fixing 18 mm. thick marble partition slab with chawk doongri marble square cut, both sides polished with two front corners rounded and edges polished.
1
1440
1440.26
... More
Supplying fitting and fixing shower of approved brand and make Chromium plated round shower with revolving joint 100 mm dia
with rubid cleaning system (Equivalent to Code No. 542(N) & Model -Tropical / Sumthing Special of ESSCO or similar brand).
1
456
456.52
... More
(iii) Chromium plated shower arm 240 mm long (Equivalent to Code No.536(A) & Model - Tropical / Sumthing Special of ESSCO or similar
brand).
1
312
312.09
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved
quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
550 mm X 400 mm size
1
2230
2230.08
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.
750 mm long
3
59
178.77
... More
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
a) 580mm x440mm
1
1629
1629.13
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C fitting complete, C.I. brackets including two coats of painting to bracket etc.
1
1025
1025.15
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.
i) Polythene Flush Pipe
1
156
156.55
... More
Flat back urinal (half-stallin urinal)in white vitreous china ware of approved make (CERA/HINDWARE)supplied,fitted and fixed in position with brass screw on
75mmx75mmx75mm wooden block complete.470 mm X 280 mm X 340 mm
2
954
1908.9
... More
Supplying ,fitting and fixing approved brand p.v.c. connector white flexible ,with both ends coupling with heavy brass C.P.nut 15mm dia.
1) 300mm. long.
5
57
287.85
... More
Supplying & fitting and fixing cast iron ‘P’ or ‘S’ Trap conforming to I.S. 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed surface. a) ‘S’ trap.
i) 100 mm
1
811
811.03
... More
Cast iron soil pipe only conforming to I.S. 3989/1970 and I.S. 1729/1964 with bobbing nails etc. including making holes’ in the walls, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete.
a) with valamoid joints including sealing with sand cement mortar (4:1) up to quarter depth.
ii) 100 mm dia (internal)
10
694
6948.8
... More
Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S.including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).
(a) With valamoid joints including sealing the top with cement mortar (4:1)
i) 100 mm dia
2
548
1096.86
... More
Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint
complete. (Payment of Painting will be paid seperately).
i) 75 mm dia
1
275
275.73
... More
Supplying PVC water storage tank approved quality with closed top with lid (black). Multilayer. a) 1000 Litre capacity.
1
5179
5179.28
... More
Labour for hoisting P.V.C. water storage tank.
Upto 1500 litre capacity.
i) Upto 1st storey from G.L.
1
96
96.96
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
4
19
76.76
... More
Constructing Inspection pit of inside measurement 600 mm x 600 mm x upto 600 mm (depth) with 250 mm thick 1st class brick work in cement mortar (6:1) on all sides bottom of the pit consisting of 100 mm. thick cement concrete (6:3:1) with jhama Khoa over a layer of jhama brick flat soling 12 mm. thick (4:1) cement plaster to inside walls and outside walls upto G.L. and 20 mm thick (4:1) plaster to bottom of the pit providing necessary invert with cement concrete (4:2:1) with jhama chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm. thick R.C.C. slab (4:2:1) with stone chips and necessary reinforcement upto 1% and Shuttering including 6 mm. thick cement plaster (4:1) in all external surfaces of the slab and one 560 mm. dia R.C.C. manhole cover of approved make supplied fitted and fixed in the slab with necessary fittings necessary earth work in excavation in all shorts of soil filling sides of the pit with earth and removing spoils after work complete in all respect. With pakur variety.
4
7325
29302.12
... More
Construction of septic tank of different capacities as per approve drawing with 1st. class brick work in cement mortar (4:1) including two 560 mm. dia R.C.C. manhole cover of approved make supplied, fitting and fixed in the top slab with necessary fitting 19 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 12 mm. tick cement plaster (4:1) to outside wall up to 200 mm. below G.L. floor finished with 25 mm. thick grey artificial stone including, supplying fitting and fixing all necessary specials fitting, S.W. Tees, C.I. foot rest etc. including excavating earth in all shorts or soil, shoring, bailing and pumping out water, as necessary, ramming dressing, the bed and refilling the sides of the tank with earth removing spoils filling up the Chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing & connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as per direction of Engineer-In-Charge.
a) For 20 users.
1
48687
48687.05
... More
Construction of Circular soak well 2.5 metre deep in all types of sandy soils with dry brick work up to 1.6 metre from the bottom having 150 mm. intermediate cement brick work (6:1) band all round and cement brick work (6:1) up to 0.9 metre from top with 19 mm. thick cement plastering (4:1) to inside face up to the depth of cement brick work 12 mm. thick cement plaster (4:1) on outer face from top of the well up to G.L. and 6 mm. thick cement plaster (4:1) on Top of the R.C.C. cover slab including filling bottom 100 metre of inside of the well with brick metal (50 mm to 63 mm. size ) including R.C.C. cover slab of designed thickness with cement concrete (4:2:1) with stone chips with necessary, reinforcement and shuttering including one 560 mm. dia R.C.C. manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary, arrangement for pipe connections, excavation of wall including shorting dewatering and removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials.
a) With 250 mm thick dry brick work and 250 mm. thick cement brick work (6:1) and 1.00 m inside dia.
2
16793
33586.54
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. A) With P trap
1
1435
1435.21
... More
Supplying, fitting and fixing soap holder. (a) PTMT(Prayag or equivalent)
2
136
272.7
... More
Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire & labour charges for boring pipes , scaffolding , tools and plants as necessary and taking out them and lowering pipes, strainers blind pipe etc. and fitting & fixing the same complete including bucket washing and other incidental works in this connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore.
a) For depth upto 150 metre for 50 mm dia. tube well with top
enlargement of 100 mm dia.
i) 50 mm dia. boring etc.
100
289
28987
... More
ii) 100 mm dia. boring etc. top enlargement
50
430
21513
... More
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.
1
8329
8329.47
... More
Supply of PVC Pipes & fittings ( Medium duty ) conforming to ASTMD – 1785 & threaded to match with GI Pipes as per IS : 1239 (Part – I ). i) 50 mm dia
90
284
25633.8
... More
ii)100 mm dia
90
882
79446.6
... More
Supplying high density polythene strainer of approved make with adapter conforming to IS specification. - (i) 50 mm dia.
5.4
537
2901.53
... More
Supplying , fitting & fixing steel cutter piece up to 450mm long with socket i) 50 mm dia.
12
190
2290.68
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution at work including hiore & labour charges for tools & plants and sterilizing the equipment , paying all charges and fees , testing etc.complete in all respect as per direction.
1
1243
1243.31
... More
Supplying, fitting & fixing 300mm housing clamp of approved quality.
1
2257
2257.35
... More
Washing & developing tube-well with air compressor pump and engine for 8 ( eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with V notch including hire & labour charges for all tools & plants and scaffolding as required complete in all respect.
1
7613
7613.38
... More
Packing the annular space between the out side of tube well pipes and strainers and the bore pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer- in-Charge including cost of all materials, labour, equipment complete. ( Note: Initial 6M of Annular space between the housing pipe and the bore should not be shrouded with pea size gravel to avoid contamination with surface water)
3
2049
6147.87
... More
Labour for making arrangement for showing verticality test including the cost for hire charges of tools & plants, scaffolding , labour etc. all complete.
1
925
925.16
... More
Supplying , fitting & fixing checkvalve(horizontal) G.M. tested to 21 Kg/Cm2 --------- 40 mm
1
1494
1494.8
... More
Supplying fitting & fixing PVC reducing socket ( Medium density ) conforming to ASTMD – 1785 & threaded to match with GI Pipes as per IS : 1239 (Part – I ). i) 50mm X 100mm
1
172
172.71
... More
Supplying fitting & fixing tube well cover as per requirement at site
1
400
400
... More
Supplying fitting & fixing submersible cable Finolex make ISI size 2.5 Sq.mm
120
97
11756.4
... More
Supplying fitting & fixing KSB make submersible pump and motor set model no. CORAC4c/15 of 1.5HP speed 2800 to 2900 with all necessary arrangements including loading unloading transportion as per direction of EIC ( payment will be made onl after satisfactory performance of the pump & motor set for supply of water ))
1
15150
15150
... More
Supply & installation charges of control panel size 350X300X150 mm complete with L&T connectors 16 amps. M.No. 2 over load relay with single phase preventer off and on switch, 3 no's. line fuse , 3 no's. indicator lamps, volt meter, push button, selector, switch Amp. meter with complete.
1
15301
15301.5
... More
Supplying, fitting and fixing G.I Cap at top, 100 mm dia.
1
140
140.39
... More
(a) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbared wire fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples, straining bolt and binding wire as necessary.
(Payment to be made on lengh of individual lines of wire.)
1500
27
41940
... More
Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete.
(i) 10 mm dia.
(b) 150 mm.
350
43
15200.5
... More
Supplying galvanised staples fitted and fixed complete.
(a) 19 mm to 25 mm size
900
2
2016
... More
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in - charge.
In ground floor.
6
10190
61145.4
... More
M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
5
9986
49934.4
... More
40mm size graded aggregates(Pakur varity) delivered and stacked at site.
120
1675
201108
... More
Labour for spreading gravel of specific size in hard concrete base to requisite thickness(100 mm) (measured after compaction.
650
12
7813
... More
Surface dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15cm depth and disposal of the rubbish within a lead upto 75m as directed.
500
10
5050
... More
Iron haspbolt D-type handle of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting 300mm long
4
167
670.64
... More
Electrical works: Supply,delivery,fittings,fixing & electrical connection of 433 volt AC Distribution Board (Including freight,insurances,incidental charges , Taxes,Duties , Cess etc as applicable) as per technical specification of WBSEDCL and Indiian Standard.
1.Size: 1000mm(H) X 750(W) mm X 300(D) mm 2.Panel shall made of 2 mm thick Steel Sheet. 3.Colour of the Panel shall be of "Siemens" Light Grey in Power Coated 4.Bus bar shall be tinned electrolytic Copper with Continous current rating of 200A with minimum size 30mm X 5mm & without Joint as per IS standard and shall be supported by flat Insulator 5.Panel Shall be properly Gasketed for dust and vermin proof (IP-54 Type) 6.Control wiring shall be done by 6/4/2.5 Sq.mm. flexible copper cable "FR" 650/1100 KV Grade .(Havell's Make) 7.Havell's make 200A TPN SFU with 200A HRC fuse link Cat Code:IHFSTF4200-1 NO (Incomer) 8.Havell's make TPN MCB 32 AMP - 4 Nos. (For Water Supply,Outdoor Light,Yard Light , & Spare - 1 no's.) 9.Havell's make TPN MCB 16 AMP - 4 Nos. (For OLTC - 2 no's , & Spare - 2 no's.) 10.Havell's Make DP MCB 32 AMP - 4 NO'S (For Indoor Light & Indicating Lamp - 1 no , Battery Charger 1- 1 no , Battery Charger 2 - 1 no & Spare- 1no) 11.Havell's make DP MCB 16 AMP - 8 NO'S (For AC Supply - 2 nos (33kV & 11kv Panel - 1 each) , RTU & UPS - 1 each , RTCC - 2 no's , Spare- 1 no's) 12.AE make AC Ammeter of 0-200A range,flush mounting ,Size-96x96mm,analog type ,5/1A operating current from CT Secondary with KAYCEE make selector Switch - 01 no. 13.AE make AC Voltmeter of 0-600V range,flush mounting ,Size-96x96mm,analog type ,5/1A operating current from CT Secondary with KAYCEE make selector Switch - 01 no. 14.KAPPA make 200/5A Tape Insulated Current Transformer - 4 no's 15.VISHNO make 230V AC Indicating Lamp (R , Y & B - 1 each) 16.100X100 mm Size Danger Board with details as per standard Size.
1
69128
69128.92
... More
Supply,delivery,fittings,fixing & electrical connection of 433 volt DC Distribution Board (Including freight,insurances,incidental charges , Taxes,Duties , Cess etc as applicable) as per technical specification of WBSEDCL and Indiian Standard.
1.Size: 1000mm(H) X 750(W) mm X 300(D) mm 2.Panel shall made of 2 mm thick Steel Sheet 3.Colour of the Panel shall be of "Siemens" Light Grey in Power Coated 4.Double bus arrangement with change over switch with provision for one set of +ve and –ve connected to Charger-1 and another set of +ve and –ve connected to Charger-2.Bus bar shall be tinned electrolytic Copper with Continous current rating of 200A without Joint as per IS standard and shall be supported by flat Insulator 5.Emergency lighting circuit shall be provided such that the lights normally burn on AC 240 Volts, 50 Hz but in case of failure of AC supply, these come up on DC supply with the help of automatic change over contactors and again change over to AC supply with the restoration of AC supply. There shall be two number double pole ON/OFF switches with HRC fuses one each for AC and DC supply 6.Panel Shall be properly Gasketed for dust and vermin proof (IP-54 Type) 7.Internal wiring of DCDB shall be done as per technical specification and Indian Standard. 8.Havell's make 100A DP DC MCCB with Thermal Over Load Trip - 1 no incomer 9.Havell's make DP DC MCCB 16 AMP - 16 Nos. (11kV - 4 no's , 33kV - 7 no's , Scada Equipments - 1 no , Emergency Illumination of Control Room - 1 no , Spare- 3 no's.) 10.AE make DC Ammeter of 0-30A range,flush mounting ,Size-96x96mm,analog type - 1 no 11.AE make DC Voltmeter of 0-40V range,flush mounting ,Size-96x96mm,analog type - 1 no 12.Siemens Make 30V DC Earth Fault Alarm Relay - 1no 13.Siemens Make Mains Fail Alarm Relay - 1 no 14.30V DC Buzzer of reputed Make - 2 no's 15.Vishno Make 30 V DC RED Indicating Lamp - 2 no's 16.VISHNO Make Push button - (Yellow & Blue) - 2 nos 17.GE Make 2A HRC fuse link with base - 2 Nos 18.GE Make 16A HRC fuse link with base - 32 Nos 19.GE Make 30V DC Axiliary Contactor with 2NO+2NC - 4 no's 20.100X100 mm Size Danger Board with details as per standard Size.
1
60600
60600
... More
Earthing with copper plate (610 x610 x3mm size) having waight of 9.84 kg and 1 no 25 x5 mm copper strip (3.20 mtr long ) & 1 no 6 sq mm PVC Insulated stranderd copper wire ( 4 mtr long) incel S& F 15 mm dia GI Pipe ( ISI MEDIUME) Protation( 4 mtr long to filled wich bitumen partly under the ground level & restrorin the surface duly rammed and providing 3.0 mtr long 25 mm dia GI Pipe (5 mediume) for perliodic treatment incl. providing masonary enclusare on the trip other earth electrod of over all size 8636 x8636 x 46 mm deep ( bellow ground leavel completed with concreted with brick work (1.6 of 25 cm with duly plastered with cement moster ( inside) CI INSPECTION COVER OF SIZE 36.56 X36.56 CM WITH Locking arrangement GI reducer and treatment of soil by using solt & charcoal or etc for plate electrod.
2
10782
21564.14
... More
Suppling & fixing earth busber of galvonaized (hot dip) ms flat 40 mm x 6 mm on all having clerance of
6 mm from wall including providing drilled holles on the busber completed with GI Bolt nuts washer spacing including etc as per required.
2
199
399.72
... More
Connecting the equipments body to earth bushber incl. S&F 25 mm x 6 mm Galvanised (hot dip) ms flat on ground floor with gi saddel as required and connection to equipments incl. Driling holes , with bolts , nuts , etc.
70
142
9951.9
... More
Extra for grouding necessary enclouser on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x6 cm on top below ground level complete with brike work 1:6 of 25cm wide duly piasteid with cement morter .
2
942
1885.26
... More
Measurment of soil by using salt & charcole or coke for plate electrode.
2
547
1094.08
... More
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/ loop with stapies bursed inside wall/loop as required and making connection to equipments with bolts, nuts, Stranded GI wire (i) 7/14 SWG
30
16
494.4
... More
Supplying and fixing double door Horizontal TPN MCB
2
2492
4984.1
... More
Supplying and fixing double door SPN MCB Distribution 2+6 way Enclosure (DHDPSNODRW06)
1
1105
1105.4
... More
Supplying and fixing 240/415 V MCB of Breaking 6-32 A
70
173
12114.9
... More
40 A DP
1
724
724.23
... More
63 A FP
1
1520
1520.58
... More
Supplying & Fixing Industrial Plug & Socket board with 240 V, 20 A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capacity 10KA (C-Curve) in SS enclosure fixed on wall and necessary conection.
3
931
2793.9
... More
Wiring in 1.1 KV grade single core staranded 'FR' PVC (A) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
800
105
84064
... More
(B) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (1.5 sqmm)
190
126
24074.9
... More
(C) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)
160
135
21758.4
... More
Finishing of the PVC insulated wire ends by socketting with pin / ring type copper sockets and insulated tapes 2.5 sqmm
320
6
1977.6
... More
6.0sqmm
50
9
463.5
... More
10.0sqmm
30
11
339.9
... More
Distribution wiring in 1.1 KV grade 2 x 22/0.3 (1.5 sqmm) single Average run 5 mtr
15
678
10183.5
... More
Average run 8 mtr
15
905
13583.25
... More
Average run 10 mtr
20
1055
21119.2
... More
Average run 12 mtr
21
1206
25333.56
... More
Distribution wiring in 1.1 KV grade 2 x 22/0.3 (1.5 sqmm) On Board
25
222
5563
... More
Supply & Fixing 240 V, ModularSocket (2 Module) types fan regulator (Step type) (brand approved by EIC) on existing Modular GI switch board with top cover plate incl. Making necy. Connections etc.
8
398
3189.52
... More
Supply & Delivery of 4fit. Philips / havelis /C.G light fitting accessories. Including supply of 1 no. TMC 501 P2 XT -LED 20 Watt.
10
2627
26270.1
... More
Supplying & Fixing angular batten holder (Anchor) on 75 mm dia PVC round block / round bakelite on wall/celling.
10
39
391.5
... More
Supply & Delivery of 250V, 50 Hz, 1200mm sweep A.C Celing Fan complete with blades, canopy, fork,rubber bush etc. Incl. Connecting.Make : C.G./Usha/Bajaj/Havells/EQ
8
2936
23488.56
... More
Fixing only celing fan complete with blades, canopy, fork, rubber bush, etc incl. S&F connecting wire for down rod up to 30 cm incl. Painting the rod with approved paint and making necessary connection as required.
8
67
543.92
... More
S&F exhaust fan after hols in wall and making good damages and smoot cement fenish etc . As practi cable as possible and providing 2 x1 /1.40 pvc insulated and sheeted wire and making connection for exahust fan incl. S&F the louver shuter . Make -CGL/ISI MARK & reputed make.
4
2833
11332.2
... More
Supply & fixing louver shutter on wall with bnecy. Bolts & nuts ( 6 mm dia x 62 mm long). AI for 38cm
(6 to 15 inch.) exhaust fan.
4
327
1310.4
... More
S/F 240v , 16A , 3Pin moduler type plug socket ( brand appd by EIC) With16 amp moduler type switch, without plug top on 4 module gi moduler type switch board with top cover plate flushed in wall incl.S/F Switch board and cover plate and making necy .connection with pvc copper wire.and earth continuity wire etc.
16
493
7892.16
... More
Supply and install Havells make JETA IRIS 200 Energy saving , environmental friendly long life exclusive innovative die-cast aluminum IP65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.(200 W LED 5700K) for yard lighting.
16
7726
123624
... More
Laying on Wall / surface with Saddles / clamps. Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MSsaddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
760
63
48541.2
... More
Supply, delivery, fitting & fixing electrical connection including Frieght, insurance, incidental charges, taxes, duties, cess etc. (as applicable) of PVC Casing (ISI mark & reputed make) suitable for wiring as follows with wooden guly and screw. 20mm (3/4 inch)
1466
32
48334.02
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%