West Bengal State Electricity Distribution Company Limited Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Electricity Distribution Company Limited - WBSEDCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 Jun 2022
Closing DateCancelled
Tender Amount₹ 1,88,82,658
Costs
EMD
₹ 3,77,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Three Storied Administrative Building For North Malda Division Office And Chanchal Ccc At Existing Chanchal 33/11 Kv Sub-station Premises Including Sanitary And Plumbing Works, Construction Of Rcc Approach Road, Boundary Wall And Othe
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_WBSED_384059_1Bid Award Id
ViewTender No
RM/MRO/CIVIL/e-TENDER/22-23/05Tender Authority
West Bengal State Electricity Distribution Company Limited ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.
370
-
78.32
... More
Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete.(Payment will be made on profile measurement before and after the work). (b) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth.
200
-
383.62
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (Payment to be made on measurement of finished quantity)
350
-
435.62
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus / Jhou bulla piling, strutting etc.) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner-in-charge). Depth upto 1.5 m.
150
-
379.76
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus / Jhou bulla piling, strutting etc.) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner-in-charge). For additional depth beyond 1.5 m and upto 3.00 m.
150
-
433.29
... More
Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus / Jhou bulla piling, strutting etc.) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner-in-charge). For additional depth beyond 3.00 m
50
-
492.88
... More
Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with thechemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.)
290
-
111.1
... More
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.
2
-
451.47
... More
Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. upto 150 mm thick.
In Ground Floor
2
-
948.39
... More
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m including stacking of steel bars. In ground floor including roof.
In Ground Floor
9
-
1975.56
... More
Stripping off worn out plaster and raking out
joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
200
-
19.19
... More
Cutting chase upto 125 x 150 mm. and subsequent mending of damages. In brick wall [Cement-3.6 Kg/Mtr]
60
-
89.89
... More
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
645
-
325.22
... More
Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth.
25
-
4968.19
... More
Brick work with 1st class bricks in cement mortar (1:6) In superstructure, ground floor
70
-
5193.42
... More
Brick work with 1st class bricks in cement mortar (1:6) In First Floor
65
-
5305.53
... More
Brick work with 1st class bricks in cement mortar (1:6) In Second Floor
65
-
5417.64
... More
Brick work with 1st class bricks in cement mortar (1:6) In Third Floor
15
-
5529.75
... More
125 mm thick brick work with 1st class bricks in cement mortar (1:4) In ground floor
225
-
682.76
... More
125 mm thick brick work with 1st class bricks in cement mortar (1:4) In First Floor
100
-
694.88
... More
125 mm thick brick work with 1st class bricks in cement mortar (1:4) In Second Floor
100
-
707
... More
75 mm. thick brick work with 1st class bricks set in cement, sand mortar
(1:4) in ground floor including H.B. netting in every alternate layers.
20
-
472.68
... More
75 mm. thick brick work with 1st class bricks set in cement, sand mortar
(1:4) in First floor including H.B. netting in every alternate layers. r
20
-
484.8
... More
75 mm. thick brick work with 1st class bricks set in cement, sand mortar
(1:4) in Second floor including H.B. netting in every alternate layers.
20
-
496.92
... More
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. Pakur variety.
In Ground Floor
45
-
5176.5
... More
Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety.
In Ground Floor
230
-
5800.68
... More
Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety.
In First Floor
82
-
5896.63
... More
Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety.
In Second Floor
75
-
5992.58
... More
Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety.
In Third Floor
45
-
6088.53
... More
Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor - Pakur variety - 1:3:6 proportion.
85
-
4382.39
... More
Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm.
dia rod complete including mending damages. Payment for damage and repair to be made separately
20
-
101
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6 mm nominal size) excluding shuttering and reinforcement, if any, in gound floor as per relevant IS codes. Pakur variety
In Third Floor
17
-
4833.86
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work upto roof of ground floor
750
-
366.63
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work In First Floor
500
-
384.81
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work In Second Floor
500
-
402.99
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work In Third Floor
125
-
421.17
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works
25 mm to 30 mm shuttering without staging in foundation.
275
-
207.05
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4 m. Tor steel.II. JSW/JSPL/SHYAM/SRMB.
In Ground Floor
25.74
-
64885.43
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4 m. Tor steel.II. JSW/JSPL/SHYAM/SRMB.
In First Floor
11
-
65319.73
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4 m. Tor steel.JSW/JSPL/SHYAM/SRMB.
In Second Floor
11
-
65754.03
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4 m. Tor steel.JSW/JSPL/SHYAM/SRMB.
In Third Floor
7
-
66188.33
... More
Extra rate for using water proofing and plasticising admixture @0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.
75
-
120.19
... More
Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)
170
-
259.57
... More
25 mm thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately). (Chequering not required over concrete or painted surface).
20
-
179.78
... More
Supplying and laying Polythene Sheet (150 gm/sqm) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
640
-
24.24
... More
18 mm to 22 mm thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer-in-charge to match with the existing work. [Slurry for bedding @4.4 kg/sqm and pointing @2.0 kg/sqm] Ground floor
20
-
1024.14
... More
Supplying, fitting and fixing 18 mm to 22 mm thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/sqm and for jointing @1.8 kg/sqm] Ground floor
7
-
1163.52
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor.With Makrana plain pink/ Adranga Pink/Garbh Gulabi/Udaypur Green/ Black Bhaslana )(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding
0.6 sq.m.
Ground floor
75
-
1698.82
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor.With Makrana plain pink/ Adranga Pink/Garbh Gulabi/Udaypur Green/ Black Bhaslana )(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding
0.6 sq.m.
First floor
50
-
1710.94
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor.With Makrana plain pink/ Adranga Pink/Garbh Gulabi/Udaypur Green/ Black Bhaslana )(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding
0.6 sq.m.
Second floor
50
-
1835.17
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor.With Makrana plain pink/ Adranga Pink/Garbh Gulabi/Udaypur Green/ Black Bhaslana(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding
0.6 sq.m..
Third floor
50
-
1847.29
... More
Supplying fitting and fixing 15 to 18 mm thick Marble
slab/Tile in riser of step or skirting (upto 300 mm ht) over
15mm (avg) thick base of Cement mortar (1:2) laid with white
cement slurry @ 4.4 kg/ Sq.m at back side of marble and
jointed with white cement slurry @ 2.2 kg/ Sq.m with
necessary pigments including grinding and Granite Polishing.
[White cement and Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi /
Udaypur Pink / Udaypur green / Black Bhalsana
(ii) Area of each tile exceeding 0.3sq.m. but not exceeding 0.6
sq.m
Ground Floor
10
-
1835.17
... More
Supplying fitting and fixing 15 to 18 mm thick Marble
slab/Tile in riser of step or skirting (upto 300 mm ht) over
15mm (avg) thick base of Cement mortar (1:2) laid with white
cement slurry @ 4.4 kg/ Sq.m at back side of marble and
jointed with white cement slurry @ 2.2 kg/ Sq.m with
necessary pigments including grinding and Granite Polishing.
[White cement and Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi /
Udaypur Pink / Udaypur green / Black Bhalsana
(ii) Area of each tile exceeding 0.3sq.m. but not exceeding 0.6
sq.m
First Floor
10
-
1847.29
... More
Supplying fitting and fixing 15 to 18 mm thick Marble
slab/Tile in riser of step or skirting (upto 300 mm ht) over
15mm (avg) thick base of Cement mortar (1:2) laid with white
cement slurry @ 4.4 kg/ Sq.m at back side of marble and
jointed with white cement slurry @ 2.2 kg/ Sq.m with
necessary pigments including grinding and Granite Polishing.
[White cement and Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi /
Udaypur Pink / Udaypur green / Black Bhalsana
(ii) Area of each tile exceeding 0.3sq.m. but not exceeding 0.6
sq.m
Second Floor
10
-
1859.41
... More
Supplying fitting and fixing 15 to 18 mm thick Marble
slab/Tile in riser of step or skirting (upto 300 mm ht) over
15mm (avg) thick base of Cement mortar (1:2) laid with white
cement slurry @ 4.4 kg/ Sq.m at back side of marble and
jointed with white cement slurry @ 2.2 kg/ Sq.m with
necessary pigments including grinding and Granite Polishing.
[White cement and Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi /
Udaypur Pink / Udaypur green / Black Bhalsana
(ii) Area of each tile exceeding 0.3sq.m. but not exceeding 0.6
sq.m
Third Floor
10
-
1871.53
... More
Extra cost of labour for prefinished and premoulded Nosing to
treads of steps, railing, window sill etc. of Marble Stone.
90
-
260.58
... More
Extra cost of labour for Marble Stone Floor in treads of Steps
50
-
228.26
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall.
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m. (ii) Other than Coloured decorative including white
In Ground Floor
70
-
711.04
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall.
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m. (ii) Other than Coloured decorative including white
In First Floor
70
-
716.09
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall.
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m. (ii) Other than Coloured decorative including white
In Second Floor
70
-
721.14
... More
M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge
4
-
10261.6
... More
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes-300 mm x300mm x10 mm with breaking strength 1200 N.
In Ground Floor
20
-
915.06
... More
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of
tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes-300 mm x300mm x10 mm with breaking strength 1200 N.
In 1st Floor
20
-
927.18
... More
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance 0.5, Mohr's hardness 5.0, Staining resistance: Class-1, Water Absorption: E 0.5%], MOR 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of
tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes-300 mm x300mm x10 mm with breaking strength 1200 N.
In 2nd Floor
20
-
939.3
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor. (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with
pigment.
(A) Light Colour
In Ground Floor
150
-
1278.66
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor. (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with
pigment.
(A) Light Colour
In 1st Floor
170
-
1283.71
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor. (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with
pigment.
(A) Light Colour
In 2nd Floor
170
-
1288.76
... More
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS:226, IS:808 & SP(6)-1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS:816-1956 & IS:1995 using electrodes of approved make and brand conforming to IS:814-1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. For structural members of specified sections weighing less than 22.5 kg/m may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each
additional floor or 4m. beyond initial 8m. or part thereof.
Ground Floor
1
-
73329.03
... More
Collapsible gate with 40 mm X 40 mm X 6 mm Tee as top and bottom guide rail, 20 mm X 10 mm X 2 mm vertical channels 100 mm apart in fully stretched position 20 mm X 5 mm MS flats as collapsible bracings properly rivetted and washered including 38 mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Payment will be made on the area of the gate covered by two guard rails and two extreme channels)
In ground floor.
20.04
-
4394.51
... More
Collapsible gate with 40 mm X 40 mm X 6 mm Tee as top and bottom guide rail, 20 mm X 10 mm X 2 mm vertical channels 100 mm apart in fully stretched position 20 mm X 5 mm MS flats as collapsible bracings properly rivetted and washered including 38 mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Payment will be made on the area of the gate covered by two guard rails and two extreme channels)
In First Floor
3.5
-
4438.46
... More
a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
Ground Floor
10.8
-
3302.7
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (iii) Centre hung ventilators as per I.S. sizes 580 mm. Ground floor
10
-
483.79
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (iii) Centre hung ventilators as per I.S. sizes 580 mm. First floor
10
-
489.6
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (iii) Centre hung ventilators as per I.S. sizes 580 mm.second floor
10
-
495.47
... More
MS integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with MS flats and bars.
Ground floor
750
-
95.95
... More
MS integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with MS flats and bars.
First floor
750
-
96.97
... More
MS integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with MS flats and bars.
Second floor
750
-
97.99
... More
MS integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with MS flats and bars.
Third floor
750
-
99.02
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mmdia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)
40
-
9167.77
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and MS clamps. (The quantum should be correted upto three decimals). Sal : Local. In Ground Floor
0.55
-
73683.54
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and MS clamps. (The quantum should be correted upto three decimals). Sal : Local.
In 1st Floor
0.5
-
73885.54
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and MS clamps. (The quantum should be correted upto three decimals). Sal : Local. In 2nd Floor
0.5
-
74087.54
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and MS clamps. (The quantum should be correted upto three decimals). Sal : Local. In 3rd Floor
0.4
-
74289.54
... More
Supplying fitting and fixing in position approved PVC door frame (Matt finish) made of extruded PVC multichamber hollow section having dimensions 60 mm X 50 mm X 2 mm (+/-0.2 mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40 mm X 20 mm X 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of PVC expandable fastner / wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.
70
-
281.79
... More
Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position but
excluding the cost of hinge and other fittings.
In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be 40mm thick shutters with 19mm thick panel of size 30 to 45 cm
made) Ordinary Teak Wood.
In Ground Floor
6.5
-
4190.49
... More
Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position but
excluding the cost of hinge and other fittings.
In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be 40mm thick shutters with 19mm thick panel of size 30 to 45 cm
made) Ordinary Teak Wood.
In 1st Floor
4.2
-
4219.78
... More
Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position but
excluding the cost of hinge and other fittings.
In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be 40mm thick shutters with 19mm thick panel of size 30 to 45 cm
made) Ordinary Teak Wood.
In 2 nd Floor
4.2
-
4249.07
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65 mm wide each and the entire frame fitted with 37.5 mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35 mm thick shutters (single leaf)
In Ground Floor
10
-
2685.59
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65 mm wide each and the entire frame fitted with 37.5 mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35 mm thick shutters (single leaf) In First Floor
6.5
-
2699.73
... More
PVC Door Shutter - 30 mm thick. Supplying fitting and fixing PVC door shutter of approved quality & shade in position, the style & rail of the PVC door shutter will be made of rigid PVC multicavity hollow chamber of 59 mm X 30 mm section with 2.0 mm (+/-0.2 mm) wall thickness. Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or MS galvanised tubular 'L' shaped bracket 100 mm X 200 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm X 30 mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mm X 25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliences. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc. In Ground Floor.
10
-
2148.27
... More
PVC Door Shutter - 30 mm thick. Supplying fitting and fixing PVC door shutter of approved quality & shade in position, the style & rail of the PVC door shutter will be made of rigid PVC multicavity hollow chamber of 59 mm X 30 mm section with 2.0 mm (+/-0.2 mm) wall thickness. Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or MS galvanised tubular 'L' shaped bracket 100 mm X 200 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm X 30 mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mm X 25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliences. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc.
In First Floor
10
-
2162.41
... More
PVC Door Shutter - 30 mm thick. Supplying fitting and fixing PVC door shutter of approved quality & shade in position, the style & rail of the PVC door shutter will be made of rigid PVC multicavity hollow chamber of 59 mm X 30 mm section with 2.0 mm (+/-0.2 mm) wall thickness. Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or MS galvanised tubular 'L' shaped bracket 100 mm X 200 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm X 30 mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mm X 25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliences. Carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc.
In Second Floor
10
-
2176.55
... More
Supplying , fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs. with 50 mm iron Butt-hinge Local Sal.
30
-
29.29
... More
Supplying, fitting and fixing MS clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. 40 mm X 6 mm, 125 mm Length.
164
-
20.2
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 75 mm X 60mm X 3.15 mm.
30
-
47.47
... More
Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting. 300 mm long.
10
-
167.66
... More
(ii) Door stopper (Anodised aluminium)
50
-
70.7
... More
Anodized aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws. 200 mm long X 10 mm dia bolt.
50
-
78.78
... More
Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to IS specification (IS-230/72) fitted and fixed. With continuous plate base (Hexagonal/Round Rod) Grip 125 mm X 12 mm
50
-
104.03
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 20 mm thick plaster
In Ground Floor
400
-
164.63
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 20 mm thick plaster
In First Floor
325
-
168.67
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 20 mm thick plaster
In Second Floor
325
-
172.71
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 20 mm thick plaster
In 3rd Floor
150
-
176.75
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 15 mm thick plaster
In Ground Floor
250
-
143.42
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 15 mm thick plaster
In First Floor
250
-
147.46
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 15 mm thick plaster
In Second Floor
260
-
151.5
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:6 cement mortar 15 mm thick plaster
In third Floor
50
-
155.54
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:4 cement mortar 10 mm thick plaster
In Ground Floor
300
-
128.27
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:4 cement mortar 10 mm thick plaster
In First Floor
200
-
132.31
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:4 cement mortar 10 mm thick plaster
In Second Floor
200
-
136.35
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary. [Excluding cost of chipping over concrete surface] With 1:4 cement mortar 10 mm thick plaster
In Third Floor
50
-
140.39
... More
Labour for chipping of concrete surface before taking up plastering work.
600
-
21.21
... More
Making V Groove line (6 mm wide, 6 mm deep) in plastered surface.
149.99
-
4.98
... More
Neat cement punning about 1.5 mm thick in wall, dado, window sill, floor etc. Note - Cement 0.152 cum per 100 sqm.
350
-
34.34
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) One Coat Water based interior grade Acrylic Primer
In Ground /First/second Floor
2850
-
31.11
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. In Ground Floor
400
-
31.71
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. In First Floor
325
-
32.43
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. In Second Floor
325
-
33.15
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. In Third Floor
175
-
33.87
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coats) Premium 100% Acrylic Emulsion. In Ground Floor
400
-
84.84
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coats) Premium 100% Acrylic Emulsion.
In First Floor
325
-
85.56
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coats) Premium 100% Acrylic Emulsion.
In Second Floor
325
-
86.27
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (Two Coats) Premium 100% Acrylic Emulsion.
In Third Floor
175
-
86.99
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
200
-
29.29
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
50
-
38.38
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
On timber or plastered surface - With super gloss (hi-gloss) - Two coats (with any shade except white)
75
-
81.81
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
On steel or other metal surface - With super gloss (hi-gloss) - Two coats (with any shade except white)
200
-
79.79
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty : (Two coats) Standard Quality
2850
-
62.62
... More
Rendering the surface of walls and ceiling with white cement based WATERPROOF wall putty of approved make and brand (1.5 mm thick) Ground Floor
650
-
123.22
... More
Rendering the surface of walls and ceiling with white cement based WATERPROOF wall putty of approved make and brand (1.5 mm thick)First Floor
650
-
123.95
... More
Rendering the surface of walls and ceiling with white cement based WATERPROOF wall putty of approved make and brand (1.5 mm thick)Second Floor
650
-
124.67
... More
Rendering the surface of walls and ceiling with white cement based WATERPROOF wall putty of approved make and brand (1.5 mm thick) Third Floor
250
-
125.4
... More
Supplying, fitting & fixing C.I Grating (Heavy type). Upto 100 mm square or 100 mm dia.
10
-
69.69
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc.) complete.
UPVC Pipes : 110 mm dia.
80
-
253.51
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc.) complete.
UPVC Fittings : Bend 87.5 degree 110 mm dia.
20
-
161.6
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc.) complete.
UPVC Fittings : Plain Tee of 110 mm Dia.
10
-
173.72
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc. if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc.) complete.
UPVC Fittings : Shoe 110 mm dia.
15
-
112.11
... More
Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary.
200
-
27.96
... More
Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. (i) 10 mm. dia. (a) 150 mm.
60
-
43.43
... More
Supplying galvanised staples fitted and fixed complete.
(a) 19 mm. to 25 mm. Size
93
-
2.24
... More
Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per
direction. (a) Brick-on-edge edging (125 mm) depth
Brick-on-end edging (250 mm) depth.
200
-
83.05
... More
Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White)
(a) 250 mm long
172
-
305.02
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Casement window ( 40 mm Depth series)
(i)Outer frame.
250
-
158.57
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Casement window ( 40 mm Depth series)
(ii)Mullion.
60
-
224.22
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Casement window ( 40 mm Depth series)
(iii)Shutter.
360
-
155.54
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Casement window ( 40 mm Depth series)
(iv)Glazing clip.
360
-
42.42
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Casement window ( 40 mm Depth series)
(v) Cleat angle. (Non-annodized).
172
-
265.63
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
i) Top , bottom & side member.
130
-
324.21
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
ii) Intermediate member.
94
-
342.39
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
iii) Glazing clip.
220
-
50.5
... More
Supplying 125 mm. Dia acrylic handle for aluminium door as per
approved make & brand.Natural Colour
60
-
182.81
... More
Supplying Heavy Duty Aluminium Handle (EBCO Type)
(Natural White)
120
-
96.96
... More
Supplying Aluminium casted body Butt Hinge (KOBRA type).
(Natural white)
360
-
56.56
... More
Supplying 250mm long Heavy Type Aluminium window Peg Stay
(Natural White)
120
-
55.55
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
In Ground floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
150
-
2220.99
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
In 1st floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
10
-
2247.64
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
In 2nd floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
12
-
2274.61
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
(D) Partly glazed and partly panelled partition or fixed glazing made of
extruded and anodised alloy aluminium sections, fabrications after
cutting to proper shape and size, drilling and aligning fitted with inbuilt
locking arrangement cutting the glass / board (prelaminated / particle /
block) to requisite shape and size moulding the edges fitted and fixed
glazing clips and dry set neoprine /EPDM gasket, along with all other
necessary arrangements for fixing the partition to walls, floors, beams,
columns polysulphide sealant for water proofing if necessary complete in
all respect as per drawing and specifications and direction of the
Engineer in charge
I) For partitions using section of size:
a) 63.50 mm x 38.10 mm
75
-
735.28
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
(D) Partly glazed and partly panelled partition or fixed glazing made of
extruded and anodised alloy aluminium sections, fabrications after
cutting to proper shape and size, drilling and aligning fitted with inbuilt
locking arrangement cutting the glass / board (prelaminated / particle /
block) to requisite shape and size moulding the edges fitted and fixed
glazing clips and dry set neoprine /EPDM gasket, along with all other
necessary arrangements for fixing the partition to walls, floors, beams,
columns polysulphide sealant for water proofing if necessary complete in
all respect as per drawing and specifications and direction of the
Engineer in charge First Floor
I) For partitions using section of size:
a) 63.50 mm x 38.10 mm
195
-
747.4
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
(D) Partly glazed and partly panelled partition or fixed glazing made of
extruded and anodised alloy aluminium sections, fabrications after
cutting to proper shape and size, drilling and aligning fitted with inbuilt
locking arrangement cutting the glass / board (prelaminated / particle /
block) to requisite shape and size moulding the edges fitted and fixed
glazing clips and dry set neoprine /EPDM gasket, along with all other
necessary arrangements for fixing the partition to walls, floors, beams,
columns polysulphide sealant for water proofing if necessary complete in
all respect as per drawing and specifications and direction of the
Engineer in charge Second Floor
I) For partitions using section of size:
a) 63.50 mm x 38.10 mm
75
-
759.52
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM
gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.
The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
iii) Openable / Casement window. Ground Floor
25
-
1128.17
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM
gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.
The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
iii ) Openable / Casement window. 1st Floor
32
-
1140.29
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-
Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM
gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC.
The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.
iii ) Openable / Casement window. 2nd Floor
35
-
1152.41
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
In Ground floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars.
150
-
1523.08
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
In First floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars.
10
-
1541.36
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
In 2nd floor
Flash butt welded windows and ventilators
(No shop priming will be allowed to facilitate inspection of workmanship)
(a) Fixed type steel windows as per IS sizes with horizontal glazing
bars.
12
-
1559.85
... More
(iv)Two point nose steel handle including fitting and fixing.
40
-
50.5
... More
(vi) steel peg stay 300 mm long including fitting and fixing.
40
-
35.35
... More
Partition of commercial ply as per design fitted and fixed
complete (excluding the supporting framework but
including necessary teak wood battens of size 40mmx 25
mm):
In Ground Floor (iii) 12mm thick
5
-
1028.18
... More
Partition of commercial ply as per design fitted and fixed
complete (excluding the supporting framework but
including necessary teak wood battens of size 40mmx 25
mm):
In Ground Floor (i) 4mm thick
10
-
604.99
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Top , bottom & side member.Ground floor
340
-
324.21
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Intermediate member.Ground Floor
435
-
342.39
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Glazing clip.Ground Floor
1200
-
50.5
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Movable door shutter
Door frame (Top & sides). Ground Floor
100
-
318.15
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Movable door shutter
Shutter : Top rail.Ground Floor
30
-
307.04
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Movable door shutter
Shutter : Bottom rail. Ground Floor
30
-
452.48
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Movable door shutter
Shutter : Lock rail Ground Floor
30
-
380.77
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Movable door shutter
Door vertical.Ground Floor
150
-
335.32
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). In 10-12 Micron thickness Annodizing film Natural white
Fixed partitions.
(Unsupported length of vertical member upto 1.5 m. Height of both ends of vertical member restrained but panels within 0.9 sqm.)
Movable door shutter
Glazing clip.Ground Floor
300
-
50.5
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units :
Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration. Payment for door frame sections are to be paid seperately).In Ground Floor
10.5
-
1293.81
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units :
Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration. Payment for door frame sections are to be paid seperately)
For Single Leaf In 1st Floor
2.1
-
1305.93
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units :
Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration. Payment for door frame sections are to be paid seperately)
For Single Leaf In 2nd Floor
8.4
-
1318.05
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units :
Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration. Payment for door frame sections are to be paid seperately)The rate includes the hire charge of all tools and plants, adhesive,
joineries such as screw, cleat angle etc. but excluding the cost of extruded
alumium sections, glass, panel boards neoprene / EPDM gasket, locking
arrangement, weather gasket / wool pile, floor spring, top pin, handle,
tower bolt, glazing clips etc. (10% rate reduction has to be made for
swing doors or partitions where floor sping is not used. 10%
enhancement of rate is to be made where door frame of extruded
aluminium sections has to be fitted and fixed to masonry wall. 5% rate
enhencement may be allowed for double leaf swing door. Payment shall
be made for the shutter area only exept where door frame is fixed the
entire opening shall be taken to consideration.Payment for door frame
sections are to be paid seperately).
For Double Leaf in Ground floor
26.64
-
1358.5
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units :
Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration. Payment for door frame sections are to be paid seperately)
For Double Leaf in First floor
3.6
-
1370.62
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units :
Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer-in-charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration. Payment for door frame sections are to be paid seperately)
For Double Leaf in Second floor
3.6
-
1382.74
... More
Supplying heavy duty hydraulic double action floor spring along with top pin / set of pivots conforming to IS:6315 or any approved make as per direction of Engineer-in-charge.
35
-
1746.29
... More
Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer-in-Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 (excluding the cost of supporting frame work and teak wood battens / lipping). Prelaminated particle board conforming to IS:3087-1985 and IS:12823-1990. Both side decorative laminate Interior Grade 12 mm thick.
In Ground Floor
50
-
1093.83
... More
Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer-in-Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 (excluding the cost of supporting frame work and teak wood battens / lipping). Prelaminated particle board conforming to IS:3087-1985 and IS:12823-1990.
Both side decorative laminate Interior Grade 12 mm thick.I
In first Floor
150
-
1123.12
... More
Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer-in-Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 (excluding the cost of supporting frame work and teak wood battens / lipping). Prelaminated particle board conforming to IS:3087-1985 and IS:12823-1990. Both side decorative laminate Interior Grade 12 mm thick.I
In Second Floor
55
-
1152.41
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
5mm thick coloured / tinted / smoke glass.
100
-
590.85
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
5mm clear glass.
210
-
531.26
... More
Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately].
52
-
833.25
... More
Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
8
-
1263.51
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
25 mm dia.
2
-
785.78
... More
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
20 mm dia.
2
-
610.04
... More
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
30
-
544.39
... More
Supplying, fitting and fixing bib cock or stop cock. Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
30
-
497.93
... More
Supplying, fitting and fixing bib cock or stop cock.
Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
30
-
823.15
... More
Supplying, fitting and fixing 10 litre PVC low-down cistern conforming to IS specification with PVC fittings complete, CI brackets including two coats of painting to bracket etc.
14
-
1025.15
... More
Wash basin vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75 mm X 75 mm X 75 mm wood blocks and CI brackets including two coats of painting of CI brackets. 550 mm X 400 mm size.
14
-
1396.83
... More
Supplying fitting and fixing stainless steel sink complete with waste filling & two coats of paining of C.I. brackets.a) Sink Only 630 mm X 550 mm X 180 mm
6
-
3825.88
... More
Supplying,fitting and fixing approved brand PVC Connector white flexible, with both ends coupling with heavy brass CP nut, 15 mm dia 750 mm long.
27
-
118.17
... More
Supplying,fitting and fixing approved brand 32 mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long.
14
-
75.75
... More
Supplying, fitting & fixing approved patent vent cowl ICI conforming to ISS and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately). 100 mm dia.
3
-
370.67
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P.hinges, rubber buffer and brass screws complete.(a) E.W.C. (iv) Bestolite (solid type) white
7
-
722.15
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap
7
-
1435.21
... More
Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.)
of approved make in white vitreous chinaware in position (excluding cost of
concrete for fixing).
(i) 580 mm long
6
-
982.73
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS 13592-1992.(B) Fittings. Double Y.110 mm
6
-
276.74
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 470 mm X 280 mm X 340 mm.
6
-
954.45
... More
Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with (a) Artificial stone (4:2:1) with 6 mm stone chips and chequered including adding colour as necessary.
6
-
58.58
... More
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).
(i) 450 mm X 350 mm
3
-
889.81
... More
Supplying, fitting & fixing Half round channel with or without outlet as required set in cement concrete (1:3:6) with jhama chips complete. (Payment of concrete will be paid seperately). 600 mm X 150 mm. White vitreous chinaware.
25
-
584.79
... More
Supplying, fitting and fixing 32 mm dia Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe.
13
-
156.55
... More
Supplying, fitting & fixing urinal flush pipe fittings of approved brand. C.P urinal flush pipe fitting range of three.
6
-
1260.48
... More
Supplying, fitting & fixing 18 mm thick marble partition slab with chawk doongri marble square cut, both side polished with two front corners rounded and edge polished.
6
-
1440.26
... More
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per IS:3438-1965 together with brass CP hinges. 600 mm X 450 mm.
7
-
488.84
... More
Supplying, fitting & fixing glass shelf with aluminium guard rails, ordinary type with 5.5 mm sheet glass. 600 mm X 125 mm.
7
-
484.8
... More
Supplying, fitting and fixing liquid soap container. Fibre glass.
7
-
189.88
... More
Supplying, fitting and fixing soap holder. Fibre glass.
20
-
58.58
... More
Supplying, fitting and fixing towel rail with two brackets. CP over Brass 25 mm dia and 600 mm long.
14
-
434.3
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work PVC Pipes (Dia) 15 mm
50
-
118.17
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (b)(i) 20 mm dia. medium quality
60
-
144.43
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work PVC Pipes (Dia)25 mm
40
-
192.91
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(A) For Exposed Work
(c)(i) 32 mm dia. medium quality
40
-
238.36
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(A) For Exposed Work (d)(i) 40 mm dia. medium quality
40
-
294.92
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(B) For concealed Work (d)(i) 15 mm dia. medium quality
20
-
138.37
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(B) For Concealed Work (d)(i) 20 mm dia. medium quality
20
-
159.58
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(B) For Concealed Work (d)(i) 25 mm dia. medium quality
20
-
207.05
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia 50mm)
50
-
284.82
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia 100mm)
50
-
882.74
... More
Reducing Socket (mm X mm) 100 X 50
1
-
172.71
... More
Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock - 15 mm (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
14
-
560.55
... More
Labour for boring tube well of required dia by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia tube well with top enlargement of 100 mm dia.
(i) 50 mm dia. boring etc.
50
-
289.87
... More
Labour for boring tube well of required dia by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. For depth upto 150 metre for 50 mm dia tube well with top enlargement of 100 mm dia.
100 mm dia boring etc. top enlargement
50
-
430.26
... More
Supplying PVC strainer of approved make with adapter conforming to IS:12818 specifications. 50 mm dia.
18
-
370.67
... More
Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. 50 mm dia.
1
-
190.89
... More
Supplying, fitting and fixing GI cap at top 100 mm
1
-
140.39
... More
Supplying, fitting and fixing MS socket ring 100 mm
1
-
109.08
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
1
-
7613.38
... More
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.
1
-
925.16
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
-
1243.31
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-In-Charge including cost of all materials labour and equipment complete.
1
-
2049.29
... More
Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.
1
-
8329.47
... More
Supplying, fitting and fixing Finolex make PVC Cable for Sub-mersible pump motor.
30
-
95.21
... More
Supplying, fitting and fixing crompton make submersible pump and motor 2 HP with all necessary arrangements for fixing including loading, unloading, transportation as per direction of EIC (Payment will be made only after satisfactory performance of the pump & motor set for supply of water and demostration of pumping water at site.
1
-
17311.1
... More
Supply and installation charge of control panel size 350 mm X 300 mm X 150 mm complete with L & T make connectors 16 Amps no 2 over load relay with single phase preventer off and on switch 3 no line fuse 3 no indicator lamp , volt meter, push button, selector switch amps motor with complete.
1
-
3375.66
... More
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the
top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (excluding the cost of master trap only).
(ii) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 100 mm dia. of approved make A) With Pakur variety. (II. JSW/JSPL/SHYAM/SRMB)
3
-
10621.16
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water asnecessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.(iii) For 30 users
A) With Pakur variety. (.JSW/JSPL/SHYAM/SRMB )
1
-
59591.01
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia .JSW/JSPL/SHYAM/SRMB
1
-
15624.7
... More
Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor (i) In Roof: b) With 0.63 mm thick sheet
120
-
650.44
... More
80 mm thick interlocking designer concrete paver block M-40 grade for
medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.
[Note: Subgrade CBR shouldnot be less than 5)
Colour Decorative
295
-
1691.75
... More
Supplying and Planting of different plant / trees ( Supplying
well grown plants bushy and healthy, minimum height as
specified i.e. exposed height including all leads & lift,
carriage, handling, manuring, applying presticide and
fertilizer etc. v) Duranta goldianna of size not less than 20cm
14.95
-
15.15
... More
ELECTRICAL WORKS - Internal Wiring with lights, fans, LAN Connection and Inverter System S & F of Hylam Sheet of thickness 6 mm of suitable size (ISI Approved) (24'' X 30'') to be fixed on angle iron on wall and 3 Nos. of 160 Amp. Kitkat type fuse to be fixed on the Hylam Sheet. (Ref: NS)
1
-
1201.9
... More
S & F 415V, 250A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Ref: D3 / 4a)
1
-
12740.85
... More
Supplying and fixing double door 6 Way Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make: Legrand) 8 Way Enclosure (UPTO 250A ) with 250 A FP MCCB as Incomer and 8 Nos 63A TP MCB as Outgoing. (D11/ 15),(D8/10), (D6/7)
1
-
50786.28
... More
Supplying and fixing 6 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection with 01 nos 415 V, 63A FP MCB Isolator as incomer and 18 nos 240V, 16A-32A SP MCB of Breaking capacity 10kA & C characteristics on din rail of DBs and necessary connection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as to G.S. (Make: Legrand) (Ref :D9/14, D6/7, D5/6, D10/14)
6
-
8239.02
... More
S & F 250V, 6-10A per way, SPN MCB DB with SS enclouser double door with IP- 42/43 protection with DP Isolator as incomer & SP MCB's ('C' Curve, 10kA) as otgoing concealed in wall after cutting the wall and mending the good damages to original finish incl. Inter connection with suitable size of copper wire and neutral link and provision for earthing attachment as to G.S. (Make Legrand). i) 2 + 10 Way Enclosure with 40 A DP Isolator as Incomer and 10 Nos. SP MCB's as Outgoing. (Ref : D9 /14, D5/6, D9/13)
12
-
4248.36
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] a) Average Run - 9 Mtrs (Ref : E11 / 4d)
260
-
971.42
... More
Do - do - do - to 6 amp. 3 pin plug socket with 6A switch ( Brand approved by EIC) - do - do - do. a) On Board. (Ref : E12 / 7a)
40
-
71.05
... More
S & F 250 volt 6A 2 Nos Plug socket with 2 nos 6A piano key type switch (Anchor) on sheet metal box (7'' x 4'') embded in wall incl. making necy. Connection & mending good the damages to original finish ( Ref : E4/10a, E5/14a, E5/15a, E6)
45
-
369.05
... More
S & F 250 volt 5 pin 16 A flush type Plug socket with 16 A piano key type switch (Anchor)fixed on 3mm thick bakelite top cover on (7'' x 4'') M.S. Box incl earthing attachment incl. S & F M.S box & bakelite top cover & necy. connection to G.S.(Ref : E6/22)
10
-
304.36
... More
S & F 240 V, 3 nos. 5pin, 6A plug socket with 3 Nos 6A piano key type switch, 1 no. 5pin, 16A plug socket with 1 No 16A piano key type switch 1No. phase indicating lamp, (All Anchor Make) on S & F 8''x10''x2.5'' sheet metal switch board(16SWG) flushedin wall with bakelight top cover as to G.S. ( For computer Terminal) . (Ref : E7/24)
12
-
709.47
... More
S & F 250 volt 3 pin 25 A flush type Plug socket (Anchor)fixed on 3mm thick bakelite top cover on (7'' x 4'') M.S. Box incl earthing attachment incl. S & F M.S box & bakelite top cover & necy. connection to G.S. (For AC Machine) ( Ref : NS)
24
-
202
... More
Supply & Fixing 240 V, 25 A, AC starter (Brand approved by EIC) with 25A DP MCB (CCurve) and on 3mm thick bakelite top cover on (7'' x 4'') M.S. Box incl earthing attachment incl. S & F M.S box & bakelite top cover & necy. connection to G.S. (For AC Machine) (Ref : E19/16)
24
-
808.1
... More
Supply & fixing 6 watt LED bulk head light fittings with all accessories & making necessary connection as per direction of EIC. (Make- Philips Endura/Havells LED- WT202W LED 6S CW PSU S2 PC) (Ref : NS)
7
-
1195.84
... More
S&F of A.C. superior type call bell on T.W. Board incl.S&F T.W. Board (Make-Havells/Anchor-8320)(Ref : D13/20.a)
5
-
183.47
... More
S & F LED lamp (Crompton / Philips) on angle holder for bracket point incl. making necy. Connection as to GS (Ref : NS)
i) 9 watt.
55
-
130.29
... More
Supply & Delivery 250 volt. 4 Ft. Long 18 Watt LED fittings complete with all accessories (Philips/Havells Make). (Ref : NS)
i) TMC 501P 1xT-LED 22W P3241 with 01 nos Essential LEDtube 1200mm 20W865 T8 INDI – 2100lm
46
-
640.34
... More
Supply & Delivery 250 volt. 4 Ft. Long 18 Watt LED fittings complete with all accessories (Philips/Havells Make). (Ref : NS)
ii) TMC 501P 2xT-LED 22W P3242 with 02 nos Essential LEDtube 1200mm 20W865 T8 INDI – 2100lm
56
-
996.87
... More
Fixing only single/twin Fluo.Light fittings complete with all accesaries directly on wall or ceiling with M.S clamp As required as per GS. ( Ref : C2/14b)
12
-
106.05
... More
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length (Ref :C2/ 17)
90
-
211.04
... More
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box
with alkathene sheet, placed in order to prevent concrete from entering the box.(Ref:D14/31)
68
-
184.53
... More
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl.
making necy. connections etc.. (Ref :E6/18b)
68
-
231.19
... More
Supply & Delivery of 1400 mm sweep A.C. Ceiling Fan (Orient Summercool / New Breeze or Crompton Aura) without regulator with all accessories. (Ref :NS)
65
-
1908.9
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (Ref :C3/21.a)
65
-
69.99
... More
Painting upto 10 letters of the engraved number with approved black /red paint as required . (Ref :C3/26.a)
65
-
11.67
... More
Supply & Fixing of Single Phase Full metal Body AC 450mm sweep Wall Mounted cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length (Make ORIENT; Wall Tornado II) (Ref :NS)
3
-
3712.76
... More
S & F of 250 volt,50 Hz, 225 mm,Sweep 1370 r.p.m. exhaust fan after making hole in wall and making good damages and smooth cement finish etc.as practicable as possible and providing necessary length of PVC insulated wire and making connection for exhaust of dia. 9" incl. fixing louver shutter on wall with necessary bolts & nuts.(Make-E.P.C Heavy Duty) (Ref :NS)
15
-
2269.47
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(Ref :E11/1 [i,ii,iii] & E14/1 [iv]), F5/9i/9ii/9iii)
i) 2 x 1.5 Sq. mm. + 1 x 1.5 Sq. mm. ( For 2x5A & 1x5A)
700
-
90.14
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(Ref :E11/1 [i,ii,iii] & E14/1 [iv]), F5/9i/9ii/9iii)
ii) 2 x 2.5 Sq. mm. + 1 x 1.5 Sq. mm. (Computer, Power Point)
350
-
108.17
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(Ref :E11/1 [i,ii,iii] & E14/1 [iv]), F5/9i/9ii/9iii)
iv) 2 x 4 Sq. mm. + 1 x 2.5 Sq. mm. (for AC & Indrustrial Plug)
480
-
139.99
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(Ref :E11/1 [i,ii,iii] & E14/1 [iv]), F5/9i/9ii/9iii)
iv) 2 x 6 Sq. mm. + 1 x 4 Sq. mm. (for TPN DB to SPNDB)
300
-
204.68
... More
Finishing the end of the cable by crimping method as to G.S.
i) 2 x 2.5 Sq. mm. + 1 x 1.5 Sq. mm.
40
-
13.79
... More
Finishing the end of the cable by crimping method as to G.S.
ii) 2 x 4 Sq. mm. + 1 x 2.5 Sq. mm.
20
-
21.21
... More
Finishing the end of the cable by crimping method as to G.S.
iii) 2 x 6 Sq. mm. + 1 x 4 Sq. mm.
18
-
26.51
... More
Supplying and fixing MCB SS enclosure with IP- 20/30 protection, pwder coated provision for housing with 20A DP MCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachment ( Make- Legrand ) (compound).(Ref :D9/12)
1
-
619.33
... More
S & F 240V LED Outdoor luminaries having Pressure dia cast aluminum housing. Heat resistant glass. IP65 protection and uniform distribution with suitable clamping arrangement incl necessary interconnection as per direction of EIC.(Ref :NS) BRP410 LED CW 072 MR FG S1 PSU GR (Philips/Havells)
6
-
10108.08
... More
Supply & Erection of 2 Mtr long pole 80mm dia ST pole with base plate & pole cap incl. C.C. ( 6:3:1 ) muffing 0.30 Mtrs dia and 0.30 Mtr. incl. 3mm thick neat cement finish and making earth bolt washer and G.I. earth bolt on plate as to G.S..(Ref :NS)
6
-
2335.12
... More
S / F single/double arm header fabricated with 100mm dia G.I. pipe of 10" length welded with 1.2m long 40mm dia. G.I. pipe at an angle of 15 deg with plate incl. S / F nuts, bolts washer etc. (Ref :NS)
a) Single arm header
6
-
1036.26
... More
S & F GI. Water proof looping cable box having hinged GI Top Cover having 4mm Thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the size 200mm x 150mm x 100mm comprising of the 250V, 15A Kit-kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. .(Ref :H5/H5)
6
-
485.71
... More
Loop wiring by 3 x 1.5 Sq mm PVC insulated Cu wite through alkathene pipe from loop box to LED fittings incl. making necy. connection as required..(Ref :NS)
50
-
54.54
... More
Supply and delivery of following 1.1 KV grade XLPE armoured cables (Polycab/Havells/Gloster).(Ref :NS)
(i) 2 core 6 sqmm - compound
120
-
69.69
... More
Supply and delivery of following 1.1 KV grade XLPE armoured cables (Polycab/Havells/Gloster).(Ref :NS)
(ii) 4 core 35 Sqmm -for VTPN to TPN
200
-
187.86
... More
Supply and delivery of following 1.1 KV grade XLPE armoured cables (Polycab/Havells/Gloster).(Ref :NS)
(iii) 4 core 95 Sqmm -for MS to VTPN
15
-
379.76
... More
Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting (Ref :F1/2a)
(i) 2 core 06 Sqmm
120
-
60.45
... More
Laying of cable from 3/3½ core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. (Ref :F1/2C)
(i) 4 core 35 Sqmm
200
-
75.3
... More
Laying of cable above 3½ core 95 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting (Ref :F1/2E)
(ii) 4 core 95 Sqmm
15
-
91.2
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below(Ref :NS)
(i) 2 core 06 Sqmm
12
-
68.68
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below(Ref :NS)
(ii) 4 core 35 Sqmm
13
-
163.62
... More
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below(Ref :NS)
(iii) 4 core 95 Sqmm
4
-
235.33
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials (Ref :F5/8b)
(i) 2 core 06 Sqmm
12
-
33.94
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials (Ref :F5/8b)
(ii) 4 core 35 Sqmm
12
-
167.56
... More
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials (Ref :F5/8b)
(iii) 4 core 95 Sqmm
4
-
328.76
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe [G1/2a]
4
-
1451.82
... More
Supplying & Fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated provision for S&F of 230V 40A DP change over (MCB module), on wall mending good the damages to original finish incl. connection & provision for earthing attachment.(MAke- Legrand / Havells) [For interchanging changes of Inverter power] (Ref :D7/9, D9/11)
1
-
1641.65
... More
S & Fixing 250 volt control panel ( Make- L & T ) make with selector switch, Voltmeter, Ammeter,Over load relay, suitable for 2 HP Single phase Sub- mersible Pump motor set. (Ref :NS)
1
-
4328.86
... More
Supply and installation of 2 KVA Sine wave Inverter with LCD Display to show input AC Voltage ,Battery voltage and percentage loading etc. (Make- EXIDE / Microtech). (Ref :NS)
1
-
10100
... More
Supply and installation of Inva Tubular batteries(EXIDE make) for invertet incl. carriage of batteries from Co's Godown to work site.(12 Volt 150 Ah, Inva Mastar, FEMO-IMTT1500.) ( 36 Month Warrenty from the date of installation)(Ref :NS)
2
-
14813.67
... More
Supply and installation suitable size battery Rack for 2 nos. battery and 1 no.Invetter mention above by suitable size trolley should be made by Iron angle bar. .(Ref :NS)
1
-
1443.29
... More
S & F earth busbar of 25 x 6 mm M.S. Flat on wall as to G.S. (Ref :NS)
2
-
176.75
... More
Loop earthing by No. 8 SWG G.I. wire from busbar to equipments as to G.S.(Ref :NS)
50
-
11.06
... More
CAT-6 cable D-Link (Ref : other div rate)
1350
-
28.28
... More
D-Link 1024C 24 port Gigabit Switch 10/100/1000 Unmanaged Switch(Ref : other div rate)
1
-
5959
... More
I/O Box with moduler D-Link (Ref : other div rate)
50
-
343.4
... More
Casing Size 3/4" Presto Plast
40
-
95.95
... More
Casing Size 1" Presto Plast
140
-
106.05
... More
25 mm wire clamp
100
-
5.05
... More
Wooden Gutca
60
-
20.2
... More
Screw size 3/4"
5
-
90.9
... More
Screw size 1"
5
-
80.8
... More
Flexible Pipe 1"
100
-
10.1
... More
Fitting charge of casing with CAT-6 cable and connection with Switch, RJ-45 Punching and I/O Box clipping
4300
-
14.14
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements